An STL file created with OpenSCAD is not Splicing on version 5.3.0 and 5.3.1 but the same file is Splicing in 5.0.0 and 5.2.2. I have tried in both Windows Version and Mac Version, both has same issue. When Splicing it stops at around 30%

[bala61]

Application Version

5.3.0

Platform

Windows 10 and Mac OS 13.3.1

Printer

Creality Ender 3

Reproduction steps

An STL file created with OpenSCAD is not Splicing on version 5.3.0 and 5.3.1 but the same file is Splicing in 5.0.0 and 5.2.2. I have tried in both Windows Version and Mac Version, both has same issue. When Splicing it stops at around 30%

ventilation_grid_V3 - UmaMahesh 114.5.zip

Actual results

The Splicing stops at around 30%

Expected results

The Splicing stops at around 30%

Checklist of files to include

• [ ] Log file
• [X] Project file

Additional information & file uploads

I have included the stl file above

[nallath]

Thanks for reporting this! We're aware of an issue that causes some models to not slice. We don't have a fix yet, but we are investigating it.

In some cases it can help to move / rotate the model a bit. Although it's not a real fix, you might try this workaround for the moment

[bala61]

Hi,

I have downloaded and installed Cura 5.5.0 on by Mac Studio and on Windows PC.

As reported earlier, some files are not splicing with the latest version of Cura as reported earlier for ver.5.3, whereas the same file is splicing well on the old Cura version 5.2.2 on both MacStudio and Windows 10. The same file is also splicing well in Prusa and Simplyfy3d.

I am enclosing the test STL file created using OpenScad for your reference.

Please do the needful.

Thanks

With warm regards U.Balashanmugham (Anand)

U.Balashanmugham Mobile 1: +91 98410 26263 http://voice.google.com/calls?a=nc,%2B919841026263(WhatsApp) Mobile 2: +91 94440 26263 http://voice.google.com/calls?a=nc,%2B919444026263 E-mail: @.>@. @.**>

“Tamil Arasu Illam”

Umapathy Lane, (Off Suncity Lane near Bata Showroom)#60 (old #16) Harleys Road,Kilpauk,Chennai – 600 010India.

On Tue, 25 Apr 2023 at 18:43, Jaime van Kessel @.***> wrote:

Thanks for reporting this! We're aware of an issue that causes some models to not slice. We don't have a fix yet, but we are investigating it.

In some cases it can help to move / rotate the model a bit. Although it's not a real fix, you might try this workaround for the moment

— Reply to this email directly, view it on GitHub https://github.com/Ultimaker/Cura/issues/15350#issuecomment-1521769511, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFHSCIVUU2AFHPL5NGO4HGLXC7EWTANCNFSM6AAAAAAXKN2L7I . You are receiving this because you authored the thread.Message ID: @.***>