Open larados2 opened 1 year ago
Thanks for the report and the file. I used 5.4.0 (on Win10) and this sliced for me on the first try. I did notice that "part (4)" is "not watertight and may not print correctly". You might try rotating that part or repairing it. There is an often reported bug that keeps models from slicing. It can sometimes be fooled by: Slightly changing the Initial Layer Height (like from 0.20 to 0.23). Moving the models on the build plate. Rotating the models on the build plate.
I'll mark this as a duplicate report and the Cura team will take a look The active part in the screenshot below is the one with errors.
Cura Version
5.4.0
Operating System
windows 10
Printer
anycubic i3 mega s
Name abnormal settings
No response
Describe model location
No response
Describe your model
yes
Add your .zip here ⬇️
aleta.zip
solo da error en cura 5.4.0 en la versión 4.13 de cura va perfecto con el mismo perfil de impresión y con las piezas colocadas igual mente en ambas versiones no me permite subir el archivo comprimido ya que pesa 53 Mb adjunto enlace de descarga de mi cuenta de mega
https://mega.nz/file/XdJR1Raa#Gwy9d426Q828doMIwXksPXHigGYC8lwzVLiZAeysluI