Closed P3dge closed 7 months ago
GregValiant
commented
1 year ago Thanks for the report and the files.
I didn't have any trouble slicing your project file and you said you were able to slice it for the Elegoo.
You could try grouping the models together and rotating them on the build plate. Sometimes change the Initial Layer Height by .02 or .03 can make a difference.
I'll mark this as a duplicate and the Cura team will take a look.
P3dge
commented
1 year ago Hi Greg, I am pleased to report that i have been able to successufly slice this file by changing the Initial Layer Height from .2mm to .22mm as you have adivised.
Thank you for your support
GregValiant
commented
1 year ago It's a clumsy workaround and shouldn't be required, but at least it is something to get a model to slice.
HellAholic
commented
7 months ago We made some improvements to prevent slicing fails in Cura 5.7.0 available to download now. I was able to slice your model successfully in 5.7.0. Could you test if that's the case for you as well? Feel free to reopen the issue if it is not resolved. You can download it here: https://github.com/Ultimaker/Cura/releases/tag/5.7.0
Cura Version
5.4.0
Operating System
Windows 11 Pro Version 22H2OS build 22621.2048 AMD Ryzen 7 5700G GPU AMD Radeon R9 200
Printer
AnkerMake 5
Name abnormal settings
No response
Describe model location
No response
Describe your model
Ironman Fingers, has been succesfully sliced with Cura 5.4.0 and Elegoo Neptune 3 Max
Add your .zip here ⬇️
AM5_Fingers.zip
Profile from AnkerMake website Cura-5.x-M5-Profile(1).zip