Flixer
commented
9 months ago Those are the logs of the error:
When I have supports active:
2024-01-17 19:38:49,837 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [320]: Creating thumbnail image (just before slice)...
2024-01-17 19:38:49,838 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2024-01-17 19:38:49,839 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.6.0\share\cura\resources\shaders\overhang.shader]...
2024-01-17 19:38:49,841 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.6.0\share\cura\resources\shaders\transparent_object.shader]...
2024-01-17 19:38:49,842 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.6.0\share\cura\resources\shaders\striped.shader]...
2024-01-17 19:38:50,220 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [337]: Starting to slice...
2024-01-17 19:38:50,221 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [357]: Going to slice build plate [0]!
2024-01-17 19:38:50,405 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [569]: Sending slice message took 0.18566250801086426 seconds
2024-01-17 19:38:50,588 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.589] [info] All settings: -s conical_overhang_hole_size="0" -s jerk_travel="30" -s retraction_combing="all" -s material_shrinkage_percentage="100.0" -s infill_line_distance="4.0" -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s line_width="0.4" -s machine_minimum_feedrate="0.0" -s machine_endstop_positive_direction_y="False" -s wall_overhang_angle="90" -s support_tower_maximum_supported_diameter="3.0" -s xy_offset="0" -s support_tree_branch_diameter_angle="7" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s cool_fan_full_at_height="0.3" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s gradual_infill_step_height="1.5" -s bridge_skin_density="100" -s support_bottom_extruder_nr="0" -s jerk_ironing="20" -s wall_x_material_flow_layer_0="100" -s resolution="0" -s cool_min_speed="10" -s support_interface_wall_count="0" -s z_seam_relative="False" -s skin_outline_count="1" -s retraction_combing_max_distance="0" -s retraction_count_max="90" -s machine_nozzle_tip_outer_diameter="1" -s cool_fan_speed_min="100.0" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s zig_zaggify_infill="False" -s support_roof_angles="[ ]" -s speed="0" -s brim_gap="0" -s prime_blob_enable="False" -s support_roof_density="100" -s cool_min_layer_time_fan_speed_max="10" -s support_roof_extruder_nr="0" -s support_skip_zag_per_mm="20" -s coasting_min_volume="0.8" -s acceleration_travel_layer_0="5000.0" -s speed_wall_x_roofing="60.0" -s speed_support_roof="40.0" -s machine_max_jerk_xy="20.0" -s inset_direction="inside_out" -s support_brim_line_count="3" -s machine_disallowed_areas="[]" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s speed_support_interface="40.0" -s brim_width="8.0" -s mesh_position_x="0" -s zig_zaggify_support="False" -s material_adhesion_tendency="10" -s small_feature_max_length="0.0" -s material_no_load_move_factor="0.940860215" -s material_shrinkage_percentage_z="100.0" -s acceleration_print="3000" -s support_bottom_stair_step_min_slope="10.0" -s gantry_height="0" -s machine_firmware_retract="False" -s small_skin_on_surface="False" -s speed_support="60" -s support_interface_skip_height="0.2" -s support_fan_enable="False" -s prime_tower_position_y="226.0" -s wipe_repeat_count="5" -s machine_use_extruder_offset_to_offset_coords="True" -s flow_rate_max_extrusion_offset="0" -s machine_nozzle_id="unknown" -s raft_interface_layers="1" -s cool_fan_speed_0="0" -s speed_print_layer_0="30.0" -s max_extrusion_before_wipe="10" -s material_bed_temperature_layer_0="65" -s alternate_extra_perimeter="False" -s carve_multiple_volumes="False" -s speed_ironing="20.0" -s acceleration_support_bottom="3000" -s machine_max_acceleration_z="100" -s center_object="False" -s support_material_flow="100" -s mold_angle="40" -s infill_line_width="0.4" -s meshfix_extensive_stitching="False" -s ooze_shield_enabled="False" -s wall_distribution_count="1" -s acceleration_wall_x_roofing="3000" -s roofing_extruder_nr="-1" -s speed_travel_layer_0="60.0" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="0" -s min_even_wall_line_width="0.34" -s jerk_print="20" -s switch_extruder_extra_prime_amount="0" -s magic_fuzzy_skin_enabled="False" -s cross_infill_density_image="" -s machine_name="Anycubic Vyper" -s support_bottom_stair_step_width="5.0" -s support_brim_width="1.2000000000000002" -s material_crystallinity="False" -s support_zag_skip_count="0" -s support_join_distance="2.0" -s infill_mesh="False" -s retraction_amount="6.5" -s raft_base_extruder_nr="0" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s ironing_only_highest_layer="False" -s machine_endstop_positive_direction_z="True" -s raft_interface_speed="22.5" -s material_diameter="2.85" -s wall_x_extruder_nr="-1" -s support_roof_height="1" -s jerk_wall_0="20" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s top_bottom_pattern="lines" -s material_break_retracted_position="-50" -s support_bottom_wall_count="0" -s meshfix_fluid_motion_angle="15" -s switch_extruder_prime_speed="20" -s machine_settings="0" -s retraction_hop_enabled="False" -s support_tree_min_height_to_model="3" -s machine_extruder_count="1" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s bridge_wall_coast="100" -s ironing_flow="10.0" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s cool_fan_speed="100.0" -s machine_endstop_positive_direction_x="False" -s acceleration_ironing="3000" -s support_roof_enable="False" -s raft_base_line_spacing="1.6" -s machine_max_jerk_z="0.4" -s raft_smoothing="5" -s machine_max_acceleration_x="9000" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s retraction_extra_prime_amount="0" -s layer_start_x="0.0" -s min_skin_width_for_expansion="4.898587196589413e-17" -s bridge_fan_speed_3="0" -s machine_shape="rectangular" -s wall_transition_angle="10" -s skin_preshrink="0.8" -s raft_acceleration="3000" -s roofing_pattern="lines" -s infill_offset_x="0" -s support_tower_diameter="3.0" -s hole_xy_offset_max_diameter="0" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_shrinkage_percentage_xy="100.0" -s machine_steps_per_mm_y="50" -s material_flush_purge_speed="0.5" -s jerk_infill="20" -s support_top_distance="0.1" -s draft_shield_height_limitation="full" -s speed_wall_0_roofing="30.0" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s roofing_line_width="0.4" -s skirt_brim_line_width="0.4" -s minimum_roof_area="1.0" -s extruder_prime_pos_abs="False" -s skin_edge_support_layers="0" -s wipe_pause="0" -s material_print_temperature="210" -s material_end_of_filament_purge_speed="0.5" -s material_id="empty_material" -s material_print_temp_prepend="True" -s support_roof_line_distance="0.4" -s skirt_line_count="1" -s support_tree_angle_slow="46.666666666666664" -s conical_overhang_enabled="False" -s mesh_position_z="0" -s speed_support_infill="60" -s wall_line_width="0.4" -s hole_xy_offset="0" -s infill="0" -s skin_overlap_mm="0.02" -s bottom_skin_expand_distance="0.8" -s dual="0" -s interlocking_enable="False" -s print_bed_temperature="65" -s travel="0" -s min_bead_width="0.34" -s support_line_distance="0" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s acceleration_travel_enabled="True" -s infill_enable_travel_optimization="False" -s gradual_support_infill_steps="0" -s acceleration_layer_0="3000" -s skin_line_width="0.4" -s raft_base_fan_speed="0" -s machine_heated_bed="True" -s quality_changes_name="Fine-Temp adjusted" -s support_offset="0.0" -s prime_tower_wipe_enabled="True" -s speed_wall_x="60.0" -s prime_tower_line_width="0.4" -s roofing_monotonic="True" -s prime_tower_flow="100" -s speed_infill="60" -s cool_min_layer_time="5" -s roofing_material_flow="100" -s travel_avoid_supports="False" -s magic_fuzzy_skin_outside_only="False" -s small_feature_speed_factor="50" -s cutting_mesh="False" -s support_tree_tip_diameter="0.8" -s coasting_enable="False" -s lightning_infill_overhang_angle="40" -s top_bottom_thickness="0.8" -s wall_0_extruder_nr="-1" -s adhesion_type="brim" -s material_anti_ooze_retraction_speed="5" -s top_skin_expand_distance="0.8" -s minimum_polygon_circumference="1.0" -s bridge_wall_material_flow="50" -s support_bottom_density="100" -s support_roof_line_width="0.4" -s remove_empty_first_layers="True" -s infill_sparse_density="20" -s infill_overlap="10" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="20" -s support_tree_max_diameter="25" -s bridge_skin_density_2="75" -s wipe_retraction_speed="25" -s support_conical_angle="30" -s jerk_support_infill="20" -s switch_extruder_retraction_speeds="20" -s acceleration_enabled="False" -s speed_slowdown_layers="2" -s top_bottom_pattern_0="lines" -s acceleration_roofing="3000" -s machine_max_feedrate_y="299792458000" -s meshfix_maximum_travel_resolution="0.8" -s machine_heated_build_volume="False" -s wall_0_inset="0" -s skirt_brim_minimal_length="250" -s support_connect_zigzags="True" -s support_interface_pattern="concentric" -s speed_wall_0="30.0" -s brim_line_count="20" -s draft_shield_enabled="False" -s support_interface_offset="0.0" -s jerk_wall_x="20" -s small_skin_width="0.8" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s support_bottom_stair_step_height="0.3" -s material_print_temperature_layer_0="210" -s raft_fan_speed="0" -s meshfix_keep_open_polygons="False" -s layer_height="0.2" -s wall_overhang_speed_factor="100" -s support_tree_top_rate="10" -s quality_name="Fine" -s machine_extruders_share_nozzle="False" -s machine_steps_per_mm_z="50" -s material_surface_energy="100" -s connect_infill_polygons="False" -s jerk_support_roof="20" -s top_bottom="0" -s support_structure="tree" -s retraction_min_travel="0.8" -s support_line_width="0.4" -s wall_transition_length="0.4" -s acceleration_travel="5000" -s group_outer_walls="True" -s raft_interface_line_width="0.8" -s jerk_travel_enabled="True" -s roofing_angles="[ ]" -s skin_material_flow="100" -s speed_wall="30.0" -s xy_offset_layer_0="0" -s material_break_speed="25" -s machine_nozzle_temp_enabled="True" -s wipe_retraction_retract_speed="25" -s wall_line_width_x="0.4" -s top_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s ironing_enabled="False" -s interlocking_orientation="22.5" -s material_break_temperature="50" -s machine_nozzle_expansion_angle="45" -s expand_skins_expand_distance="0.8" -s machine_width="250" -s layer_start_y="0.0" -s machine_extruders_shared_nozzle_initial_retraction="0" -s z_seam_x="125.0" -s machine_acceleration="4000" -s ironing_inset="0.38" -s top_bottom_extruder_nr="-1" -s raft_airgap="0.3" -s print_sequence="all_at_once" -s extruder_prime_pos_z="0" -s retraction_prime_speed="25" -s flow_rate_extrusion_offset_factor="100" -s prime_tower_enable="False" -s machine_max_feedrate_e="299792458000" -s support_bottom_material_flow="100" -s default_material_print_temperature="210" -s bridge_wall_min_length="2.1" -s coasting_speed="90" -s wall_0_material_flow="100" -s adaptive_layer_height_variation="0.1" -s raft_surface_extruder_nr="0" -s adaptive_layer_height_threshold="0.2" -s meshfix_fluid_motion_enabled="True" -s jerk_enabled="False" -s wipe_hop_amount="1" -s material_bed_temperature="65" -s machine_heat_zone_length="16" -s z_seam_position="back" -s raft_jerk="20" -s support_pattern="zigzag" -s skin_edge_support_thickness="0" -s support_brim_enable="True" -s command_line_settings="0" -s raft_base_thickness="0.36" -s speed_layer_0="30.0" -s top_thickness="0.8" -s acceleration_wall_x="3000" -s retraction_retract_speed="25" -s wipe_hop_speed="10" -s magic_spiralize="False" -s machine_start_gcode="G21 ;metric values
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G90 ;absolute positioning
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M82 ;set extruder to absolute mode
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M107 ;start with the fan off
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 X0 Y0 ;move X/Y to min endstops
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M300 S1318 P266
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 Z0 ;move Z to min endstops
2024-01-17 19:38:50,589 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G0 Z0.2
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 ;zero the extruded length
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X40 E25 F400 ; Extrude 25mm of filament in a 4cm line. Reduce speed (F) if you have a nozzle smaller than 0.4mm!
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 ;zero the extruded length again
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 E-1 F500 ; Retract a little
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X80 F4000 ; Quickly wipe away from the filament line
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M117 ; Printing…
2024-01-17 19:38:50,590 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G5" -s retraction_hop_only_when_collides="False" -s minimum_bottom_area="1.0" -s raft_surface_layers="2" -s support_z_distance="0.1" -s acceleration_wall="3000" -s support_bottom_enable="False" -s support_extruder_nr_layer_0="0" -s material_flow_layer_0="100" -s raft_surface_fan_speed="0" -s raft_interface_acceleration="3000" -s retraction_hop_after_extruder_switch="True" -s support_conical_enabled="False" -s cooling="0" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s material_flush_purge_length="60" -s min_infill_area="0" -s lightning_infill_straightening_angle="40" -s z_seam_y="255" -s travel_avoid_other_parts="True" -s infill_offset_y="0" -s skirt_brim_material_flow="100" -s infill_mesh_order="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_support_interface="3000" -s jerk_layer_0="20" -s retraction_speed="25" -s skirt_height="3" -s wall_x_material_flow_roofing="100" -s machine_feeder_wheel_diameter="10.0" -s jerk_print_layer_0="20" -s raft_base_wall_count="1" -s bottom_thickness="0.8" -s adaptive_layer_height_enabled="False" -s wall_0_material_flow_roofing="100" -s raft_surface_line_spacing="0.4" -s raft_base_acceleration="3000" -s support_bottom_angles="[ ]" -s extruders_enabled_count="1" -s wall_thickness="0.8" -s bridge_skin_speed="15.0" -s mold_roof_height="0.5" -s material_end_of_filament_purge_length="20" -s draft_shield_height="10" -s raft_surface_line_width="0.4" -s small_hole_max_size="0" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -s raft_interface_jerk="20" -s bridge_fan_speed="100" -s support_interface_line_width="0.4" -s machine_max_acceleration_y="9000" -s machine_height="265" -s gradual_infill_steps="0" -s machine_show_variants="False" -s machine_nozzle_size="0.4" -s raft_base_jerk="20" -s minimum_support_area="0.0" -s jerk_support_interface="20" -s jerk_support_bottom="20" -s wipe_retraction_prime_speed="25" -s support_tree_limit_branch_reach="True" -s default_material_bed_temperature="60" -s wall_line_width_0="0.4" -s support_bottom_height="1" -s raft_speed="30.0" -s speed_travel="120" -s prime_tower_raft_base_line_spacing="1.6" -s bridge_skin_speed_2="15.0" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s material_anti_ooze_retracted_position="-4" -s jerk_topbottom="20" -s support_angle="70" -s support="0" -s support_extruder_nr="0" -s support_roof_wall_count="0" -s machine_max_acceleration_e="10000" -s anti_overhang_mesh="False" -s acceleration_topbottom="3000" -s raft_base_line_width="0.8" -s small_feature_speed_factor_0="50" -s jerk_support="20" -s support_interface_enable="False" -s meshfix_maximum_resolution="0.5" -s blackmagic="0" -s support_infill_rate="0" -s z_seam_corner="z_seam_corner_inner" -s raft_interface_extruder_nr="0" -s relative_extrusion="False" -s prime_tower_size="20" -s infill_extruder_nr="-1" -s bridge_sparse_infill_max_density="0" -s raft_remove_inside_corners="False" -s cool_fan_enabled="True" -s platform_adhesion="0" -s conical_overhang_angle="50" -s clean_between_layers="False" -s cross_infill_pocket_size="4.0" -s support_use_towers="True" -s bridge_settings_enabled="False" -s meshfix_union_all_remove_holes="False" -s jerk_wall="20" -s infill_before_walls="True" -s roofing_layer_count="0" -s support_bottom_pattern="concentric" -s interlocking_boundary_avoidance="2" -s ironing_monotonic="False" -s acceleration_infill="3000" -s speed_z_hop="10" -s skin_no_small_gaps_heuristic="False" -s machine_depth="255" -s support_mesh="False" -s experimental="0" -s support_bottom_line_width="0.4" -s ooze_shield_angle="60" -s raft_base_speed="22.5" -s support_enable="True" -s skirt_brim_extruder_nr="-1" -s machine_center_is_zero="False" -s initial_bottom_layers="4" -s material_break_preparation_retracted_position="-16" -s wall_0_wipe_dist="0.2" -s lightning_infill_prune_angle="40" -s material_standby_temperature="150" -s travel_speed="120" -s prime_tower_brim_enable="True" -s bridge_skin_density_3="80" -s time="19:38:50" -s machine_always_write_active_tool="False" -s material_flow="100" -s support_type="buildplate" -s raft_margin="15" -s bottom_skin_preshrink="0.8" -s support_tower_roof_angle="65" -s support_interface_angles="[ ]" -s brim_replaces_support="True" -s minimum_interface_area="1.0" -s bridge_enable_more_layers="True" -s machine_steps_per_mm_x="50" -s fill_outline_gaps="True" -s z_seam_type="sharpest_corner" -s max_skin_angle_for_expansion="90" -s support_xy_overrides_z="z_overrides_xy" -s support_infill_extruder_nr="0" -s ironing_line_spacing="0.1" -s material_break_preparation_speed="2" -s speed_support_bottom="40.0" -s bridge_skin_speed_3="15.0" -s mold_width="5" -s machine_nozzle_cool_down_speed="2.0" -s min_feature_size="0.1" -s wall_transition_filter_deviation="0.1" -s support_roof_pattern="concentric" -s support_interface_height="1" -s speed_topbottom="30.0" -s machine_max_feedrate_z="299792458000" -s support_interface_material_flow="100" -s jerk_travel_layer_0="30.0" -s wipe_retraction_enable="True" -s machine_min_cool_heat_time_window="50.0" -s shell="0" -s infill_randomize_start_location="False" -s build_volume_temperature="28" -s support_skip_some_zags="False" -s nozzle_disallowed_areas="[]" -s support_roof_material_flow="100" -s machine_extruders_share_heater="False" -s acceleration_prime_tower="3000" -s infill_multiplier="1" -s wipe_brush_pos_x="100" -s wipe_retraction_extra_prime_amount="0" -s speed_prime_tower="60" -s jerk_roofing="20" -s skin_overlap="5" -s support_wall_count="1" -s day="Wed" -s support_mesh_drop_down="True" -s material_name="empty" -s retraction_hop_after_extruder_switch_height="1" -s draft_shield_dist="10" -s infill_support_enabled="False" -s skirt_gap="3" -s meshfix_fluid_motion_small_distance="0.01" -s material_guid="" -s support_interface_priority="interface_area_overwrite_support_area" -s cool_lift_head="False" -s jerk_prime_tower="20" -s raft_interface_thickness="0.30000000000000004" -s slicing_tolerance="middle" -s brim_outside_only="True" -s layer_height_0="0.3" -s initial_layer_line_width_factor="100.0" -s jerk_wall_x_roofing="20" -s wall_material_flow="100" -s material_bed_temp_prepend="True" -s prime_tower_min_volume="6" -s bridge_skin_material_flow_2="100" -s prime_tower_base_size="8.0" -s infill_wall_line_count="0" -s speed_print="60" -s cool_min_temperature="210" -s magic_fuzzy_skin_thickness="0.3" -s machine_max_jerk_e="5.0" -s mesh_position_y="0" -s material_initial_print_temperature="200" -s brim_inside_margin="2.5" -s material_bed_temp_wait="True" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.1" -s mold_enabled="False" -s support_roof_offset="0.0" -s ooze_shield_dist="2" -s acceleration_wall_0_roofing="3000" -s skin_monotonic="False" -s prime_tower_position_x="241.0" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s support_xy_distance_overhang="0.2" -s prime_tower_base_curve_magnitude="4" -s support_interface_density="100" -s acceleration_support_infill="3000" -s bridge_wall_speed="15.0" -s support_interface_extruder_nr="0" -s retraction_hop="1" -s alternate_carve_order="True" -s smooth_spiralized_contours="True" -s machine_end_gcode="M104 S0 ; turn off extruder
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M140 S0 ; turn off bed
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M84 ; disable motors
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M107
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G91 ;relative positioning
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 Z+0.5 E-5 ;X-20 Y-20 F120 ;move Z up a bit and retract filament even more
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way
2024-01-17 19:38:50,591 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 Y180 F2000
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M84 ;steppers off
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G90
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M300 S1318 P266" -s support_meshes_present="False" -s cool_fan_full_layer="2" -s speed_roofing="30.0" -s retract_at_layer_change="False" -s bridge_fan_speed_2="0" -s travel_retract_before_outer_wall="False" -s meshfix_fluid_motion_shift_distance="0.1" -s material_final_print_temperature="195" -s adhesion_extruder_nr="-1" -s wall_extruder_nr="-1" -s support_infill_angles="[ ]" -s interlocking_beam_layer_count="2" -s material_is_support_material="False" -s speed_equalize_flow_width_factor="100.0" -s raft_surface_thickness="0.2" -s wall_line_count="2" -s material_alternate_walls="False" -s wall_x_material_flow="100" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s infill_overlap_mm="0.04" -s optimize_wall_printing_order="False" -s magic_fuzzy_skin_point_dist="0.8" -s material_brand="empty_brand" -s extruder_prime_pos_x="0" -s material_extrusion_cool_down_speed="0.7" -s bottom_layers="4" -s acceleration_print_layer_0="3000" -s support_bottom_line_distance="0.4" -s bridge_skin_material_flow_3="110" -s support_tree_branch_diameter="5" -s raft_surface_acceleration="3000" -s support_infill_sparse_thickness="0.2" -s support_tree_angle="70" -s ironing_pattern="zigzag" -s switch_extruder_retraction_amount="16" -s material="0" -s raft_surface_speed="30.0" -s lightning_infill_support_angle="40" -s machine_buildplate_type="glass" -s prime_tower_base_height="0.2" -s bridge_skin_support_threshold="50" -s support_tree_bp_diameter="7.5" -s support_supported_skin_fan_speed="100" -s infill_sparse_thickness="0.2" -s travel_avoid_distance="0.625" -s interlocking_beam_width="0.8" -s bridge_skin_material_flow="60" -s wall_transition_filter_distance="100" -s material_print_temp_wait="True" -s support_conical_min_width="5.0" -s top_layers="4" -s brim_smart_ordering="True" -s jerk_wall_0_roofing="20" -s machine_scale_fan_speed_zero_to_one="False" -s cross_support_density_image="" -s support_tree_rest_preference="buildplate" -s adaptive_layer_height_variation_step="0.01" -s acceleration_skirt_brim="3000" -s support_xy_distance="0.7" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s machine_nozzle_heat_up_speed="2.0" -s wipe_retraction_amount="6.5" -s meshfix="0" -s jerk_skirt_brim="20" -s material_break_preparation_temperature="210" -s meshfix_maximum_deviation="0.025" -s infill_pattern="grid" -s skirt_brim_speed="30.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s material_maximum_park_duration="300" -s cool_fan_speed_max="100.0" -s acceleration_support_roof="3000" -s interlocking_depth="2" -s retraction_extrusion_window="6.5" -s machine_max_feedrate_x="299792458000" -s extruder_prime_pos_y="0" -s print_temperature="210" -s material_type="empty" -s date="17-01-2024" -s initial_extruder_nr="0" -s nozzle_offsetting_for_disallowed_areas="True" -e0 -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s machine_endstop_positive_direction_y="False" -s wall_overhang_angle="90" -s support_tower_maximum_supported_diameter="3.0" -s xy_offset="0" -s support_tree_branch_diameter_angle="7" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s machine_extruder_start_pos_y="0" -s lightning_infill_support_angle="40" -s machine_extruder_end_code="" -s cool_fan_full_at_height="0.3" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s jerk_ironing="20" -s wall_x_material_flow_layer_0="100" -s cool_min_speed="10" -s resolution="0" -s support_interface_wall_count="0" -s z_seam_relative="False" -s skin_outline_count="1" -s retraction_combing_max_distance="0" -s retraction_count_max="90" -s machine_nozzle_tip_outer_diameter="1" -s cool_fan_speed_min="100" -s top_layers="4" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s gradual_infill_step_height="1.5" -s support_roof_angles="[ ]" -s speed="0" -s brim_gap="0" -s zig_zaggify_infill="False" -s prime_blob_enable="False" -s support_roof_density="100" -s cool_min_layer_time_fan_speed_max="10" -s travel_avoid_other_parts="True" -s machine_extruder_start_pos_x="0" -s coasting_min_volume="0.8" -s acceleration_travel_layer_0="5000.0" -s speed_wall_x_roofing="60.0" -s speed_support_roof="40.0" -s support_infill_angles="[ ]" -s inset_direction="inside_out" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s speed_support_interface="40.0" -s brim_width="8.0" -s mesh_position_x="0" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s small_feature_max_length="0.0" -s material_no_load_move_factor="0.940860215" -s acceleration_print="3000" -s support_bottom_stair_step_min_slope="10.0" -s speed_support="60" -s support_fan_enable="False" -s support_interface_skip_height="0.2" -s wipe_repeat_count="5" -s machine_nozzle_id="unknown" -s raft_interface_layers="1" -s cool_fan_speed_0="0" -s speed_print_layer_0="30.0" -s max_extrusion_before_wipe="10" -s alternate_extra_perimeter="False" -s machine_extruder_cooling_fan_number="0" -s machine_extruder_start_code="" -s machine_nozzle_offset_y="0" -s speed_ironing="20.0" -s acceleration_support_bottom="3000" -s machine_extruder_start_pos_abs="False" -s raft_surface_thickness="0.2" -s jerk_support_interface="20" -s jerk_support_bottom="20" -s center_object="False" -s support_material_flow="100" -s mold_angle="40" -s infill_line_width="0.4" -s meshfix_extensive_stitching="False" -s wall_distribution_count="1" -s speed_travel_layer_0="60.0" -s acceleration_wall_x_roofing="3000" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="0" -s jerk_print="20" -s switch_extruder_extra_prime_amount="0" -s magic_fuzzy_skin_enabled="False" -s cross_infill_density_image="" -s min_even_wall_line_width="0.34" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s ironing_only_highest_layer="False" -s machine_endstop_positive_direction_z="True" -s raft_interface_speed="22.5" -s material_diameter="1.75" -s jerk_wall_0="20" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s top_bottom_pattern="lines" -s material_break_retracted_position="-50" -s meshfix_fluid_motion_angle="15" -s switch_extruder_prime_speed="20" -s support_bottom_wall_count="0" -s machine_settings="0" -s retraction_hop_enabled="False" -s support_tree_min_height_to_model="3" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s bridge_wall_coast="100" -s ironing_flow="10.0" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s retraction_extra_prime_amount="0" -s layer_start_x="0.0" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s cool_fan_speed="100" -s machine_extruder_end_pos_x="0" -s machine_nozzle_offset_x="0" -s machine_endstop_positive_direction_x="False" -s support_tree_rest_preference="buildplate" -s acceleration_ironing="3000" -s support_roof_enable="False" -s raft_base_line_spacing="1.6" -s raft_smoothing="5" -s min_skin_width_for_expansion="4.898587196589413e-17" -s bridge_fan_speed_3="0" -s wall_transition_angle="10" -s skin_preshrink="0.8" -s raft_acceleration="3000" -s roofing_pattern="lines" -s infill_offset_x="0" -s support_tower_diameter="3.0" -s hole_xy_offset_max_diameter="0" -s support_roof_height="1" -s machine_steps_per_mm_y="50" -s material_flush_purge_speed="0.5" -s jerk_infill="20" -s support_brim_line_count="3" -s infill_overlap_mm="0.04" -s support_top_distance="0.1" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s roofing_line_width="0.4" -s skirt_brim_line_width="0.4" -s minimum_roof_area="1.0" -s extruder_prime_pos_abs="False" -s wipe_pause="0" -s skin_edge_support_layers="0" -s material_print_temperature="185.0" -s material_end_of_filament_purge_speed="0.5" -s support_xy_distance="0.7" -s support_bottom_stair_step_width="5.0" -s support_brim_width="1.2000000000000002" -s material_crystallinity="False" -s support_roof_line_distance="0.4" -s conical_overhang_enabled="False" -s support_tree_angle_slow="46.666666666666664" -s skirt_line_count="1" -s mesh_position_z="0" -s speed_support_infill="60" -s wall_line_width="0.4" -s hole_xy_offset="0" -s infill="0" -s skin_overlap_mm="0.02" -s bottom_skin_expand_distance="0.8" -s dual="0" -s retract_at_layer_change="False" -s travel="0" -s min_bead_width="0.34" -s support_line_distance="0" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s gradual_support_infill_steps="0" -s acceleration_layer_0="3000" -s skin_line_width="0.4" -s raft_base_fan_speed="0" -s support_offset="0.0" -s prime_tower_wipe_enabled="True" -s speed_wall_x="60.0" -s prime_tower_line_width="0.4" -s roofing_monotonic="True" -s prime_tower_flow="100" -s speed_infill="60" -s cool_min_layer_time="5" -s roofing_material_flow="100" -s travel_avoid_supports="False" -s magic_fuzzy_skin_outside_only="False" -s small_feature_speed_factor="50" -s support_tree_tip_diameter="0.8" -s coasting_enable="False" -s top_bottom_thickness="0.8" -s lightning_infill_overhang_angle="40" -s speed_equalize_flow_width_factor="100.0" -s material_is_support_material="False" -s material_anti_ooze_retraction_speed="5" -s top_skin_expand_distance="0.8" -s infill_sparse_density="15" -s infill_overlap="10" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s support_infill_sparse_thickness="0.2" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="20" -s support_tree_max_diameter="25" -s bridge_skin_density_2="75" -s wipe_retraction_speed="25" -s support_conical_angle="30" -s jerk_support_infill="20" -s switch_extruder_retraction_speeds="20" -s top_bottom_pattern_0="lines" -s acceleration_roofing="3000" -s wall_0_inset="0" -s skirt_brim_minimal_length="250" -s support_connect_zigzags="True" -s support_interface_pattern="concentric" -s speed_wall_0="30.0" -s brim_line_count="20" -s support_interface_offset="0.0" -s jerk_wall_x="20" -s small_skin_width="0.8" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s wall_x_material_flow="100" -s support_bottom_stair_step_height="0.3" -s material_print_temperature_layer_0="185.0" -s raft_fan_speed="0" -s meshfix_keep_open_polygons="False" -s wall_overhang_speed_factor="100" -s material_surface_energy="100" -s jerk_support_roof="20" -s top_bottom="0" -s connect_infill_polygons="False" -s retraction_min_travel="0.8" -s support_line_width="0.4" -s group_outer_walls="True" -s raft_interface_line_width="0.8" -s wall_transition_length="0.4" -s acceleration_travel="5000" -s roofing_angles="[ ]" -s speed_wall="30.0" -s xy_offset_layer_0="0" -s skin_material_flow="100" -s machine_nozzle_temp_enabled="True" -s material_break_speed="25" -s wipe_retraction_retract_speed="25" -s wall_line_width_x="0.4" -s retraction_amount="6.5" -s support_join_distance="2.0" -s support_zag_skip_count="0" -s top_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s ironing_enabled="False" -s support_tree_angle="70" -s expand_skins_expand_distance="0.8" -s layer_start_y="0.0" -s machine_extruders_shared_nozzle_initial_retraction="0" -s raft_airgap="0.3" -s extruder_prime_pos_z="0" -s retraction_prime_speed="25" -s line_width="0.4" -s support_bottom_material_flow="100" -s default_material_print_temperature="200" -s skirt_brim_speed="30.0" -s coasting_speed="90" -s wall_0_material_flow="100" -s wipe_hop_amount="1" -s machine_heat_zone_length="16" -s z_seam_position="back" -s raft_jerk="20" -s support_pattern="zigzag" -s skin_edge_support_thickness="0" -s support_brim_enable="True" -s command_line_settings="0" -s raft_base_thickness="0.36" -s speed_layer_0="30.0" -s top_thickness="0.8" -s acceleration_wall_x="3000" -s infill_enable_travel_optimization="False" -s jerk_wall_0_roofing="20" -s retraction_retract_speed="25" -s wipe_hop_speed="10" -s retraction_hop_only_when_collides="False" -s raft_surface_layers="2" -s support_z_distance="0.1" -s minimum_bottom_area="1.0" -s acceleration_wall="3000" -s support_bottom_density="100" -s support_roof_line_width="0.4" -s material_flow_layer_0="100" -s raft_surface_fan_speed="0" -s raft_interface_acceleration="3000" -s retraction_hop_after_extruder_switch="True" -s ironing_inset="0.38" -s z_seam_x="125.0" -s extruder_nr="0" -s support_conical_enabled="False" -s cooling="0" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s material_flush_purge_length="60" -s min_infill_area="0" -s support_tree_branch_diameter="5" -s lightning_infill_straightening_angle="40" -s z_seam_y="255" -s infill_offset_y="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_support_interface="3000" -s conical_overhang_hole_size="0" -s jerk_travel="30" -s infill_line_distance="8.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s jerk_layer_0="20" -s retraction_speed="25" -s skirt_height="3" -s machine_feeder_wheel_diameter="10.0" -s wall_x_material_flow_roofing="100" -s jerk_print_layer_0="20" -s bottom_thickness="0.8" -s wall_0_material_flow_roofing="100" -s raft_surface_line_spacing="0.4" -s raft_base_acceleration="3000" -s support_bottom_angles="[ ]" -s wall_thickness="0.8" -s bridge_skin_speed="15.0" -s mold_roof_height="0.5" -s material_end_of_filament_purge_length="20" -s raft_surface_line_width="0.4" -s small_hole_max_size="0" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -s raft_interface_jerk="20" -s bridge_fan_speed="100" -s support_tree_top_rate="10" -s machine_steps_per_mm_z="50" -s infill_pattern="cubic" -s support_skip_zag_per_mm="20" -s gradual_infill_steps="0" -s support_interface_line_width="0.4" -s machine_nozzle_size="0.4" -s raft_base_jerk="20" -s minimum_support_area="0.0" -s wipe_retraction_prime_speed="25" -s support_tree_limit_branch_reach="True" -s acceleration_support_roof="3000" -s wall_line_width_0="0.4" -s support_bottom_height="1" -s raft_speed="30.0" -s speed_travel="120" -s material_break_temperature="50" -s prime_tower_raft_base_line_spacing="1.6" -s bridge_skin_speed_2="15.0" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_topbottom="20" -s material_anti_ooze_retracted_position="-4" -s support_angle="70" -s support="0" -s small_feature_speed_factor_0="50" -s raft_base_line_width="0.8" -s acceleration_topbottom="3000" -s jerk_support="20" -s support_interface_enable="False" -s meshfix_maximum_resolution="0.5" -s support_bottom_enable="False" -s blackmagic="0" -s support_infill_rate="0" -s z_seam_corner="z_seam_corner_inner" -s bridge_sparse_infill_max_density="0" -s cool_fan_enabled="True" -s platform_adhesion="0" -s conical_overhang_angle="50" -s clean_between_layers="False" -s cross_infill_pocket_size="8.0" -s support_use_towers="True" -s meshfix_union_all_remove_holes="False" -s jerk_wall="20" -s infill_before_walls="True" -s roofing_layer_count="0" -s support_bottom_pattern="concentric" -s ironing_monotonic="False" -s acceleration_infill="3000" -s speed_z_hop="10" -s skin_no_small_gaps_heuristic="False" -s experimental="0" -s support_bottom_line_width="0.4" -s initial_bottom_layers="4" -s wall_0_wipe_dist="0.2" -s material_break_preparation_retracted_position="-16" -s lightning_infill_prune_angle="40" -s material_standby_temperature="175" -s bridge_skin_density_3="80" -s raft_margin="15" -s bottom_skin_preshrink="0.8" -s support_tower_roof_angle="65" -s support_interface_angles="[ ]" -s brim_replaces_support="True" -s minimum_interface_area="1.0" -s bridge_enable_more_layers="True" -s machine_steps_per_mm_x="50" -s fill_outline_gaps="True" -s z_seam_type="sharpest_corner" -s max_skin_angle_for_expansion="90" -s support_xy_overrides_z="z_overrides_xy" -s material_break_preparation_speed="2" -s speed_support_bottom="40.0" -s material_final_print_temperature="175.0" -s bridge_skin_speed_3="15.0" -s mold_width="5" -s machine_nozzle_cool_down_speed="2.0" -s min_feature_size="0.1" -s wall_transition_filter_deviation="0.1" -s support_roof_pattern="concentric" -s support_interface_height="1" -s skirt_brim_material_flow="100" -s support_interface_material_flow="100" -s jerk_travel_layer_0="30.0" -s wipe_retraction_enable="True" -s machine_min_cool_heat_time_window="50.0" -s shell="0" -s infill_randomize_start_location="False" -s machine_extruder_end_pos_y="0" -s speed_roofing="30.0" -s support_skip_some_zags="False" -s support_roof_material_flow="100" -s acceleration_prime_tower="3000" -s infill_multiplier="1" -s raft_base_speed="22.5" -s wipe_brush_pos_x="100" -s wipe_retraction_extra_prime_amount="0" -s speed_prime_tower="60" -s jerk_roofing="20" -s skin_overlap="5" -s support_wall_count="1" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s meshfix_maximum_travel_resolution="0.8" -s meshfix_fluid_motion_small_distance="0.01" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s cool_lift_head="False" -s jerk_prime_tower="20" -s infill_support_enabled="False" -s raft_surface_acceleration="3000" -s raft_interface_thickness="0.30000000000000004" -s slicing_tolerance="middle" -s brim_outside_only="True" -s initial_layer_line_width_factor="100.0" -s jerk_wall_x_roofing="20" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s infill_wall_line_count="0" -s speed_print="60" -s cool_min_temperature="185" -s magic_fuzzy_skin_thickness="0.3" -s material_initial_print_temperature="185" -s brim_inside_margin="2.5" -s meshfix_fluid_motion_enabled="True" -s machine_extruder_end_pos_abs="False" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.1" -s acceleration_wall_0_roofing="3000" -s speed_topbottom="30.0" -s ironing_line_spacing="0.1" -s bridge_skin_material_flow_3="110" -s skin_monotonic="False" -s speed_wall_0_roofing="30.0" -s wall_material_flow="100" -s support_xy_distance_overhang="0.2" -s material_flow="100" -s bridge_wall_material_flow="50" -s support_interface_density="100" -s small_skin_on_surface="False" -s acceleration_support_infill="3000" -s mesh_position_y="0" -s retraction_hop="1" -s cool_fan_full_layer="2" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s meshfix_fluid_motion_shift_distance="0.1" -s wall_line_count="2" -s cross_support_density_image="" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s optimize_wall_printing_order="False" -s magic_fuzzy_skin_point_dist="0.8" -s extruder_prime_pos_x="0" -s bridge_wall_speed="15.0" -s bottom_layers="4" -s material_extrusion_cool_down_speed="0.7" -s acceleration_print_layer_0="3000" -s support_bottom_line_distance="0.4" -s ironing_pattern="zigzag" -s switch_extruder_retraction_amount="16" -s material="0" -s raft_surface_speed="30.0" -s support_roof_wall_count="0" -s bridge_skin_support_threshold="50" -s support_tree_bp_diameter="7.5" -s infill_sparse_thickness="0.2" -s support_supported_skin_fan_speed="100" -s travel_avoid_distance="0.625" -s interlocking_beam_width="0.8" -s bridge_skin_material_flow="60" -s meshfix_maximum_deviation="0.025" -s wall_transition_filter_distance="100" -s support_conical_min_width="5.0" -s brim_smart_ordering="True" -s acceleration_skirt_brim="3000" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s machine_nozzle_heat_up_speed="2.0" -s bridge_skin_density="100" -s wipe_retraction_amount="6.5" -s mold_enabled="False" -s support_roof_offset="0.0" -s meshfix="0" -s jerk_skirt_brim="20" -s material_break_preparation_temperature="185.0" -s material_maximum_park_duration="300" -s cool_fan_speed_max="100" -s retraction_extrusion_window="6.5" -s extruder_prime_pos_y="0" -g -e0 -l "0" -s extruder_nr="0"
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend]
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.593] [info] Progress: start accomplished in 0.000s
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.593] [info] Starting slice...
2024-01-17 19:38:50,592 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.593] [info] Slicing model...
2024-01-17 19:38:50,606 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.606] [info] Slice of mesh took 0.012 seconds
2024-01-17 19:38:50,616 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.616] [info] Make polygons took 0.010 seconds
2024-01-17 19:38:50,616 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.616] [info] Progress: slice accomplished in 0.023s
2024-01-17 19:38:50,616 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.616] [info] Starting layerparts...
2024-01-17 19:38:50,624 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.625] [info] Progress: layerparts accomplished in 0.009s
2024-01-17 19:38:50,625 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.625] [info] Starting inset+skin...
2024-01-17 19:38:50,688 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.689] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints.
2024-01-17 19:38:50,731 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.731] [info] Progress: inset+skin accomplished in 0.106s
2024-01-17 19:38:50,732 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:50.731] [info] Starting support...
2024-01-17 19:38:51,201 - ERROR - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [1027]: Backend exited abnormally with return code 3221225477!
2024-01-17 19:38:51,202 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [410]: Attempting to kill the engine process
2024-01-17 19:38:51,203 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [416]: Killing engine process
2024-01-17 19:38:51,203 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [419]: Engine process is killed. Received return code 3221225477
2024-01-17 19:38:51,203 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first.
2024-01-17 19:38:51,204 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening
2024-01-17 19:38:51,206 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: C:\Program Files\UltiMaker Cura 5.6.0\CuraEngine.exe
2024-01-17 19:38:51,206 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['C:\\Program Files\\UltiMaker Cura 5.6.0\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2024-01-17 19:38:51,232 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:51.232] [info] Connecting to 127.0.0.1:49674
2024-01-17 19:38:51,232 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected
2024-01-17 19:38:51,233 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674
2024-01-17 19:38:51,347 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:38:51.348] [info] Connected to 127.0.0.1:49674Supports inactive:
2024-01-17 19:40:18,423 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2024-01-17 19:40:18,481 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 0.06s
2024-01-17 19:40:19,134 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [320]: Creating thumbnail image (just before slice)...
2024-01-17 19:40:19,134 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2024-01-17 19:40:19,135 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.6.0\share\cura\resources\shaders\overhang.shader]...
2024-01-17 19:40:19,136 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.6.0\share\cura\resources\shaders\transparent_object.shader]...
2024-01-17 19:40:19,137 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.6.0\share\cura\resources\shaders\striped.shader]...
2024-01-17 19:40:19,483 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [337]: Starting to slice...
2024-01-17 19:40:19,483 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [357]: Going to slice build plate [0]!
2024-01-17 19:40:19,628 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [569]: Sending slice message took 0.14478611946105957 seconds
2024-01-17 19:40:19,766 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.766] [info] All settings: -s conical_overhang_hole_size="0" -s jerk_travel="30" -s retraction_combing="all" -s material_shrinkage_percentage="100.0" -s infill_line_distance="4.0" -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s line_width="0.4" -s machine_minimum_feedrate="0.0" -s machine_endstop_positive_direction_y="False" -s wall_overhang_angle="90" -s support_tower_maximum_supported_diameter="3.0" -s xy_offset="0" -s support_tree_branch_diameter_angle="7" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s cool_fan_full_at_height="0.3" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s gradual_infill_step_height="1.5" -s bridge_skin_density="100" -s support_bottom_extruder_nr="0" -s jerk_ironing="20" -s wall_x_material_flow_layer_0="100" -s resolution="0" -s cool_min_speed="10" -s support_interface_wall_count="0" -s z_seam_relative="False" -s skin_outline_count="1" -s retraction_combing_max_distance="0" -s retraction_count_max="90" -s machine_nozzle_tip_outer_diameter="1" -s cool_fan_speed_min="100.0" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s zig_zaggify_infill="False" -s support_roof_angles="[ ]" -s speed="0" -s brim_gap="0" -s prime_blob_enable="False" -s support_roof_density="100" -s cool_min_layer_time_fan_speed_max="10" -s support_roof_extruder_nr="0" -s support_skip_zag_per_mm="20" -s coasting_min_volume="0.8" -s acceleration_travel_layer_0="5000.0" -s speed_wall_x_roofing="60.0" -s speed_support_roof="40.0" -s machine_max_jerk_xy="20.0" -s inset_direction="inside_out" -s support_brim_line_count="3" -s machine_disallowed_areas="[]" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s speed_support_interface="40.0" -s brim_width="8.0" -s mesh_position_x="0" -s zig_zaggify_support="False" -s material_adhesion_tendency="10" -s small_feature_max_length="0.0" -s material_no_load_move_factor="0.940860215" -s material_shrinkage_percentage_z="100.0" -s acceleration_print="3000" -s support_bottom_stair_step_min_slope="10.0" -s gantry_height="0" -s machine_firmware_retract="False" -s small_skin_on_surface="False" -s speed_support="60" -s support_interface_skip_height="0.2" -s support_fan_enable="False" -s prime_tower_position_y="226.0" -s wipe_repeat_count="5" -s machine_use_extruder_offset_to_offset_coords="True" -s flow_rate_max_extrusion_offset="0" -s machine_nozzle_id="unknown" -s raft_interface_layers="1" -s cool_fan_speed_0="0" -s speed_print_layer_0="30.0" -s max_extrusion_before_wipe="10" -s material_bed_temperature_layer_0="65" -s alternate_extra_perimeter="False" -s carve_multiple_volumes="False" -s speed_ironing="20.0" -s acceleration_support_bottom="3000" -s machine_max_acceleration_z="100" -s center_object="False" -s support_material_flow="100" -s mold_angle="40" -s infill_line_width="0.4" -s meshfix_extensive_stitching="False" -s ooze_shield_enabled="False" -s wall_distribution_count="1" -s acceleration_wall_x_roofing="3000" -s roofing_extruder_nr="-1" -s speed_travel_layer_0="60.0" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="2.6666666666666665" -s min_even_wall_line_width="0.34" -s jerk_print="20" -s switch_extruder_extra_prime_amount="0" -s magic_fuzzy_skin_enabled="False" -s cross_infill_density_image="" -s machine_name="Anycubic Vyper" -s support_bottom_stair_step_width="5.0" -s support_brim_width="1.2000000000000002" -s material_crystallinity="False" -s support_zag_skip_count="8" -s support_join_distance="2.0" -s infill_mesh="False" -s retraction_amount="6.5" -s raft_base_extruder_nr="0" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s ironing_only_highest_layer="False" -s machine_endstop_positive_direction_z="True" -s raft_interface_speed="22.5" -s material_diameter="2.85" -s wall_x_extruder_nr="-1" -s support_roof_height="1" -s jerk_wall_0="20" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s top_bottom_pattern="lines" -s material_break_retracted_position="-50" -s support_bottom_wall_count="0" -s meshfix_fluid_motion_angle="15" -s switch_extruder_prime_speed="20" -s machine_settings="0" -s retraction_hop_enabled="False" -s support_tree_min_height_to_model="3" -s machine_extruder_count="1" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s bridge_wall_coast="100" -s ironing_flow="10.0" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s cool_fan_speed="100.0" -s machine_endstop_positive_direction_x="False" -s acceleration_ironing="3000" -s support_roof_enable="False" -s raft_base_line_spacing="1.6" -s machine_max_jerk_z="0.4" -s raft_smoothing="5" -s machine_max_acceleration_x="9000" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s retraction_extra_prime_amount="0" -s layer_start_x="0.0" -s min_skin_width_for_expansion="4.898587196589413e-17" -s bridge_fan_speed_3="0" -s machine_shape="rectangular" -s wall_transition_angle="10" -s skin_preshrink="0.8" -s raft_acceleration="3000" -s roofing_pattern="lines" -s infill_offset_x="0" -s support_tower_diameter="3.0" -s hole_xy_offset_max_diameter="0" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_shrinkage_percentage_xy="100.0" -s machine_steps_per_mm_y="50" -s material_flush_purge_speed="0.5" -s jerk_infill="20" -s support_top_distance="0.1" -s draft_shield_height_limitation="full" -s speed_wall_0_roofing="30.0" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s roofing_line_width="0.4" -s skirt_brim_line_width="0.4" -s minimum_roof_area="1.0" -s extruder_prime_pos_abs="False" -s skin_edge_support_layers="0" -s wipe_pause="0" -s material_print_temperature="210" -s material_end_of_filament_purge_speed="0.5" -s material_id="empty_material" -s material_print_temp_prepend="True" -s support_roof_line_distance="0.4" -s skirt_line_count="1" -s support_tree_angle_slow="46.666666666666664" -s conical_overhang_enabled="False" -s mesh_position_z="0" -s speed_support_infill="60" -s wall_line_width="0.4" -s hole_xy_offset="0" -s infill="0" -s skin_overlap_mm="0.02" -s bottom_skin_expand_distance="0.8" -s dual="0" -s interlocking_enable="False" -s print_bed_temperature="65" -s travel="0" -s min_bead_width="0.34" -s support_line_distance="2.6666666666666665" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s acceleration_travel_enabled="True" -s infill_enable_travel_optimization="False" -s gradual_support_infill_steps="0" -s acceleration_layer_0="3000" -s skin_line_width="0.4" -s raft_base_fan_speed="0" -s machine_heated_bed="True" -s quality_changes_name="Fine-Temp adjusted" -s support_offset="0.0" -s prime_tower_wipe_enabled="True" -s speed_wall_x="60.0" -s prime_tower_line_width="0.4" -s roofing_monotonic="True" -s prime_tower_flow="100" -s speed_infill="60" -s cool_min_layer_time="5" -s roofing_material_flow="100" -s travel_avoid_supports="False" -s magic_fuzzy_skin_outside_only="False" -s small_feature_speed_factor="50" -s cutting_mesh="False" -s support_tree_tip_diameter="0.8" -s coasting_enable="False" -s lightning_infill_overhang_angle="40" -s top_bottom_thickness="0.8" -s wall_0_extruder_nr="-1" -s adhesion_type="brim" -s material_anti_ooze_retraction_speed="5" -s top_skin_expand_distance="0.8" -s minimum_polygon_circumference="1.0" -s bridge_wall_material_flow="50" -s support_bottom_density="100" -s support_roof_line_width="0.4" -s remove_empty_first_layers="True" -s infill_sparse_density="20" -s infill_overlap="10" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="20" -s support_tree_max_diameter="25" -s bridge_skin_density_2="75" -s wipe_retraction_speed="25" -s support_conical_angle="30" -s jerk_support_infill="20" -s switch_extruder_retraction_speeds="20" -s acceleration_enabled="False" -s speed_slowdown_layers="2" -s top_bottom_pattern_0="lines" -s acceleration_roofing="3000" -s machine_max_feedrate_y="299792458000" -s meshfix_maximum_travel_resolution="0.8" -s machine_heated_build_volume="False" -s wall_0_inset="0" -s skirt_brim_minimal_length="250" -s support_connect_zigzags="True" -s support_interface_pattern="concentric" -s speed_wall_0="30.0" -s brim_line_count="20" -s draft_shield_enabled="False" -s support_interface_offset="0.0" -s jerk_wall_x="20" -s small_skin_width="0.8" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s support_bottom_stair_step_height="0.3" -s material_print_temperature_layer_0="210" -s raft_fan_speed="0" -s meshfix_keep_open_polygons="False" -s layer_height="0.2" -s wall_overhang_speed_factor="100" -s support_tree_top_rate="10" -s quality_name="Fine" -s machine_extruders_share_nozzle="False" -s machine_steps_per_mm_z="50" -s material_surface_energy="100" -s connect_infill_polygons="False" -s jerk_support_roof="20" -s top_bottom="0" -s support_structure="tree" -s retraction_min_travel="0.8" -s support_line_width="0.4" -s wall_transition_length="0.4" -s acceleration_travel="5000" -s group_outer_walls="True" -s raft_interface_line_width="0.8" -s jerk_travel_enabled="True" -s roofing_angles="[ ]" -s skin_material_flow="100" -s speed_wall="30.0" -s xy_offset_layer_0="0" -s material_break_speed="25" -s machine_nozzle_temp_enabled="True" -s wipe_retraction_retract_speed="25" -s wall_line_width_x="0.4" -s top_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s ironing_enabled="False" -s interlocking_orientation="22.5" -s material_break_temperature="50" -s machine_nozzle_expansion_angle="45" -s expand_skins_expand_distance="0.8" -s machine_width="250" -s layer_start_y="0.0" -s machine_extruders_shared_nozzle_initial_retraction="0" -s z_seam_x="125.0" -s machine_acceleration="4000" -s ironing_inset="0.38" -s top_bottom_extruder_nr="-1" -s raft_airgap="0.3" -s print_sequence="all_at_once" -s extruder_prime_pos_z="0" -s retraction_prime_speed="25" -s flow_rate_extrusion_offset_factor="100" -s prime_tower_enable="False" -s machine_max_feedrate_e="299792458000" -s support_bottom_material_flow="100" -s default_material_print_temperature="210" -s bridge_wall_min_length="2.1" -s coasting_speed="90" -s wall_0_material_flow="100" -s adaptive_layer_height_variation="0.1" -s raft_surface_extruder_nr="0" -s adaptive_layer_height_threshold="0.2" -s meshfix_fluid_motion_enabled="True" -s jerk_enabled="False" -s wipe_hop_amount="1" -s material_bed_temperature="65" -s machine_heat_zone_length="16" -s z_seam_position="back" -s raft_jerk="20" -s support_pattern="zigzag" -s skin_edge_support_thickness="0" -s support_brim_enable="True" -s command_line_settings="0" -s raft_base_thickness="0.36" -s speed_layer_0="30.0" -s top_thickness="0.8" -s acceleration_wall_x="3000" -s retraction_retract_speed="25" -s wipe_hop_speed="10" -s magic_spiralize="False" -s machine_start_gcode="G21 ;metric values
2024-01-17 19:40:19,766 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G90 ;absolute positioning
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M82 ;set extruder to absolute mode
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M107 ;start with the fan off
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 X0 Y0 ;move X/Y to min endstops
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M300 S1318 P266
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 Z0 ;move Z to min endstops
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G0 Z0.2
2024-01-17 19:40:19,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 ;zero the extruded length
2024-01-17 19:40:19,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X40 E25 F400 ; Extrude 25mm of filament in a 4cm line. Reduce speed (F) if you have a nozzle smaller than 0.4mm!
2024-01-17 19:40:19,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 ;zero the extruded length again
2024-01-17 19:40:19,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 E-1 F500 ; Retract a little
2024-01-17 19:40:19,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X80 F4000 ; Quickly wipe away from the filament line
2024-01-17 19:40:19,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M117 ; Printing…
2024-01-17 19:40:19,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G5" -s retraction_hop_only_when_collides="False" -s minimum_bottom_area="1.0" -s raft_surface_layers="2" -s support_z_distance="0.1" -s acceleration_wall="3000" -s support_bottom_enable="False" -s support_extruder_nr_layer_0="0" -s material_flow_layer_0="100" -s raft_surface_fan_speed="0" -s raft_interface_acceleration="3000" -s retraction_hop_after_extruder_switch="True" -s support_conical_enabled="False" -s cooling="0" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s material_flush_purge_length="60" -s min_infill_area="0" -s lightning_infill_straightening_angle="40" -s z_seam_y="255" -s travel_avoid_other_parts="True" -s infill_offset_y="0" -s skirt_brim_material_flow="100" -s infill_mesh_order="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_support_interface="3000" -s jerk_layer_0="20" -s retraction_speed="25" -s skirt_height="3" -s wall_x_material_flow_roofing="100" -s machine_feeder_wheel_diameter="10.0" -s jerk_print_layer_0="20" -s raft_base_wall_count="1" -s bottom_thickness="0.8" -s adaptive_layer_height_enabled="False" -s wall_0_material_flow_roofing="100" -s raft_surface_line_spacing="0.4" -s raft_base_acceleration="3000" -s support_bottom_angles="[ ]" -s extruders_enabled_count="1" -s wall_thickness="0.8" -s bridge_skin_speed="15.0" -s mold_roof_height="0.5" -s material_end_of_filament_purge_length="20" -s draft_shield_height="10" -s raft_surface_line_width="0.4" -s small_hole_max_size="0" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -s raft_interface_jerk="20" -s bridge_fan_speed="100" -s support_interface_line_width="0.4" -s machine_max_acceleration_y="9000" -s machine_height="265" -s gradual_infill_steps="0" -s machine_show_variants="False" -s machine_nozzle_size="0.4" -s raft_base_jerk="20" -s minimum_support_area="0.0" -s jerk_support_interface="20" -s jerk_support_bottom="20" -s wipe_retraction_prime_speed="25" -s support_tree_limit_branch_reach="True" -s default_material_bed_temperature="60" -s wall_line_width_0="0.4" -s support_bottom_height="1" -s raft_speed="30.0" -s speed_travel="120" -s prime_tower_raft_base_line_spacing="1.6" -s bridge_skin_speed_2="15.0" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s material_anti_ooze_retracted_position="-4" -s jerk_topbottom="20" -s support_angle="70" -s support="0" -s support_extruder_nr="0" -s support_roof_wall_count="0" -s machine_max_acceleration_e="10000" -s anti_overhang_mesh="False" -s acceleration_topbottom="3000" -s raft_base_line_width="0.8" -s small_feature_speed_factor_0="50" -s jerk_support="20" -s support_interface_enable="False" -s meshfix_maximum_resolution="0.5" -s blackmagic="0" -s support_infill_rate="15" -s z_seam_corner="z_seam_corner_inner" -s raft_interface_extruder_nr="0" -s relative_extrusion="False" -s prime_tower_size="20" -s infill_extruder_nr="-1" -s bridge_sparse_infill_max_density="0" -s raft_remove_inside_corners="False" -s cool_fan_enabled="True" -s platform_adhesion="0" -s conical_overhang_angle="50" -s clean_between_layers="False" -s cross_infill_pocket_size="4.0" -s support_use_towers="True" -s bridge_settings_enabled="False" -s meshfix_union_all_remove_holes="False" -s jerk_wall="20" -s infill_before_walls="True" -s roofing_layer_count="0" -s support_bottom_pattern="concentric" -s interlocking_boundary_avoidance="2" -s ironing_monotonic="False" -s acceleration_infill="3000" -s speed_z_hop="10" -s skin_no_small_gaps_heuristic="False" -s machine_depth="255" -s support_mesh="False" -s experimental="0" -s support_bottom_line_width="0.4" -s ooze_shield_angle="60" -s raft_base_speed="22.5" -s support_enable="False" -s skirt_brim_extruder_nr="-1" -s machine_center_is_zero="False" -s initial_bottom_layers="4" -s material_break_preparation_retracted_position="-16" -s wall_0_wipe_dist="0.2" -s lightning_infill_prune_angle="40" -s material_standby_temperature="150" -s travel_speed="120" -s prime_tower_brim_enable="True" -s bridge_skin_density_3="80" -s time="19:40:19" -s machine_always_write_active_tool="False" -s material_flow="100" -s support_type="buildplate" -s raft_margin="15" -s bottom_skin_preshrink="0.8" -s support_tower_roof_angle="65" -s support_interface_angles="[ ]" -s brim_replaces_support="True" -s minimum_interface_area="1.0" -s bridge_enable_more_layers="True" -s machine_steps_per_mm_x="50" -s fill_outline_gaps="True" -s z_seam_type="sharpest_corner" -s max_skin_angle_for_expansion="90" -s support_xy_overrides_z="z_overrides_xy" -s support_infill_extruder_nr="0" -s ironing_line_spacing="0.1" -s material_break_preparation_speed="2" -s speed_support_bottom="40.0" -s bridge_skin_speed_3="15.0" -s mold_width="5" -s machine_nozzle_cool_down_speed="2.0" -s min_feature_size="0.1" -s wall_transition_filter_deviation="0.1" -s support_roof_pattern="concentric" -s support_interface_height="1" -s speed_topbottom="30.0" -s machine_max_feedrate_z="299792458000" -s support_interface_material_flow="100" -s jerk_travel_layer_0="30.0" -s wipe_retraction_enable="True" -s machine_min_cool_heat_time_window="50.0" -s shell="0" -s infill_randomize_start_location="False" -s build_volume_temperature="28" -s support_skip_some_zags="False" -s nozzle_disallowed_areas="[]" -s support_roof_material_flow="100" -s machine_extruders_share_heater="False" -s acceleration_prime_tower="3000" -s infill_multiplier="1" -s wipe_brush_pos_x="100" -s wipe_retraction_extra_prime_amount="0" -s speed_prime_tower="60" -s jerk_roofing="20" -s skin_overlap="5" -s support_wall_count="0" -s day="Wed" -s support_mesh_drop_down="True" -s material_name="empty" -s retraction_hop_after_extruder_switch_height="1" -s draft_shield_dist="10" -s infill_support_enabled="False" -s skirt_gap="3" -s meshfix_fluid_motion_small_distance="0.01" -s material_guid="" -s support_interface_priority="interface_area_overwrite_support_area" -s cool_lift_head="False" -s jerk_prime_tower="20" -s raft_interface_thickness="0.30000000000000004" -s slicing_tolerance="middle" -s brim_outside_only="True" -s layer_height_0="0.3" -s initial_layer_line_width_factor="100.0" -s jerk_wall_x_roofing="20" -s wall_material_flow="100" -s material_bed_temp_prepend="True" -s prime_tower_min_volume="6" -s bridge_skin_material_flow_2="100" -s prime_tower_base_size="8.0" -s infill_wall_line_count="0" -s speed_print="60" -s cool_min_temperature="210" -s magic_fuzzy_skin_thickness="0.3" -s machine_max_jerk_e="5.0" -s mesh_position_y="0" -s material_initial_print_temperature="200" -s brim_inside_margin="2.5" -s material_bed_temp_wait="True" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.1" -s mold_enabled="False" -s support_roof_offset="0.0" -s ooze_shield_dist="2" -s acceleration_wall_0_roofing="3000" -s skin_monotonic="False" -s prime_tower_position_x="241.0" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s support_xy_distance_overhang="0.2" -s prime_tower_base_curve_magnitude="4" -s support_interface_density="100" -s acceleration_support_infill="3000" -s bridge_wall_speed="15.0" -s support_interface_extruder_nr="0" -s retraction_hop="1" -s alternate_carve_order="True" -s smooth_spiralized_contours="True" -s machine_end_gcode="M104 S0 ; turn off extruder
2024-01-17 19:40:19,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M140 S0 ; turn off bed
2024-01-17 19:40:19,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M84 ; disable motors
2024-01-17 19:40:19,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M107
2024-01-17 19:40:19,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G91 ;relative positioning
2024-01-17 19:40:19,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
2024-01-17 19:40:19,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 Z+0.5 E-5 ;X-20 Y-20 F120 ;move Z up a bit and retract filament even more
2024-01-17 19:40:19,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way
2024-01-17 19:40:19,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 Y180 F2000
2024-01-17 19:40:19,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M84 ;steppers off
2024-01-17 19:40:19,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G90
2024-01-17 19:40:19,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M300 S1318 P266" -s support_meshes_present="False" -s cool_fan_full_layer="2" -s speed_roofing="30.0" -s retract_at_layer_change="False" -s bridge_fan_speed_2="0" -s travel_retract_before_outer_wall="False" -s meshfix_fluid_motion_shift_distance="0.1" -s material_final_print_temperature="195" -s adhesion_extruder_nr="-1" -s wall_extruder_nr="-1" -s support_infill_angles="[ ]" -s interlocking_beam_layer_count="2" -s material_is_support_material="False" -s speed_equalize_flow_width_factor="100.0" -s raft_surface_thickness="0.2" -s wall_line_count="2" -s material_alternate_walls="False" -s wall_x_material_flow="100" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s infill_overlap_mm="0.04" -s optimize_wall_printing_order="False" -s magic_fuzzy_skin_point_dist="0.8" -s material_brand="empty_brand" -s extruder_prime_pos_x="0" -s material_extrusion_cool_down_speed="0.7" -s bottom_layers="4" -s acceleration_print_layer_0="3000" -s support_bottom_line_distance="0.4" -s bridge_skin_material_flow_3="110" -s support_tree_branch_diameter="5" -s raft_surface_acceleration="3000" -s support_infill_sparse_thickness="0.2" -s support_tree_angle="70" -s ironing_pattern="zigzag" -s switch_extruder_retraction_amount="16" -s material="0" -s raft_surface_speed="30.0" -s lightning_infill_support_angle="40" -s machine_buildplate_type="glass" -s prime_tower_base_height="0.2" -s bridge_skin_support_threshold="50" -s support_tree_bp_diameter="7.5" -s support_supported_skin_fan_speed="100" -s infill_sparse_thickness="0.2" -s travel_avoid_distance="0.625" -s interlocking_beam_width="0.8" -s bridge_skin_material_flow="60" -s wall_transition_filter_distance="100" -s material_print_temp_wait="True" -s support_conical_min_width="5.0" -s top_layers="4" -s brim_smart_ordering="True" -s jerk_wall_0_roofing="20" -s machine_scale_fan_speed_zero_to_one="False" -s cross_support_density_image="" -s support_tree_rest_preference="buildplate" -s adaptive_layer_height_variation_step="0.01" -s acceleration_skirt_brim="3000" -s support_xy_distance="0.7" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s machine_nozzle_heat_up_speed="2.0" -s wipe_retraction_amount="6.5" -s meshfix="0" -s jerk_skirt_brim="20" -s material_break_preparation_temperature="210" -s meshfix_maximum_deviation="0.025" -s infill_pattern="grid" -s skirt_brim_speed="30.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s material_maximum_park_duration="300" -s cool_fan_speed_max="100.0" -s acceleration_support_roof="3000" -s interlocking_depth="2" -s retraction_extrusion_window="6.5" -s machine_max_feedrate_x="299792458000" -s extruder_prime_pos_y="0" -s print_temperature="210" -s material_type="empty" -s date="17-01-2024" -s initial_extruder_nr="0" -s nozzle_offsetting_for_disallowed_areas="True" -e0 -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s machine_endstop_positive_direction_y="False" -s wall_overhang_angle="90" -s support_tower_maximum_supported_diameter="3.0" -s xy_offset="0" -s support_tree_branch_diameter_angle="7" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s machine_extruder_start_pos_y="0" -s lightning_infill_support_angle="40" -s machine_extruder_end_code="" -s cool_fan_full_at_height="0.3" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s jerk_ironing="20" -s wall_x_material_flow_layer_0="100" -s cool_min_speed="10" -s resolution="0" -s support_interface_wall_count="0" -s z_seam_relative="False" -s skin_outline_count="1" -s retraction_combing_max_distance="0" -s retraction_count_max="90" -s machine_nozzle_tip_outer_diameter="1" -s cool_fan_speed_min="100" -s top_layers="4" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s gradual_infill_step_height="1.5" -s support_roof_angles="[ ]" -s speed="0" -s brim_gap="0" -s zig_zaggify_infill="False" -s prime_blob_enable="False" -s support_roof_density="100" -s cool_min_layer_time_fan_speed_max="10" -s travel_avoid_other_parts="True" -s machine_extruder_start_pos_x="0" -s coasting_min_volume="0.8" -s acceleration_travel_layer_0="5000.0" -s speed_wall_x_roofing="60.0" -s speed_support_roof="40.0" -s support_infill_angles="[ ]" -s inset_direction="inside_out" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s speed_support_interface="40.0" -s brim_width="8.0" -s mesh_position_x="0" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s small_feature_max_length="0.0" -s material_no_load_move_factor="0.940860215" -s acceleration_print="3000" -s support_bottom_stair_step_min_slope="10.0" -s speed_support="60" -s support_fan_enable="False" -s support_interface_skip_height="0.2" -s wipe_repeat_count="5" -s machine_nozzle_id="unknown" -s raft_interface_layers="1" -s cool_fan_speed_0="0" -s speed_print_layer_0="30.0" -s max_extrusion_before_wipe="10" -s alternate_extra_perimeter="False" -s machine_extruder_cooling_fan_number="0" -s machine_extruder_start_code="" -s machine_nozzle_offset_y="0" -s speed_ironing="20.0" -s acceleration_support_bottom="3000" -s machine_extruder_start_pos_abs="False" -s raft_surface_thickness="0.2" -s jerk_support_interface="20" -s jerk_support_bottom="20" -s center_object="False" -s support_material_flow="100" -s mold_angle="40" -s infill_line_width="0.4" -s meshfix_extensive_stitching="False" -s wall_distribution_count="1" -s speed_travel_layer_0="60.0" -s acceleration_wall_x_roofing="3000" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="2.6666666666666665" -s jerk_print="20" -s switch_extruder_extra_prime_amount="0" -s magic_fuzzy_skin_enabled="False" -s cross_infill_density_image="" -s min_even_wall_line_width="0.34" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s ironing_only_highest_layer="False" -s machine_endstop_positive_direction_z="True" -s raft_interface_speed="22.5" -s material_diameter="1.75" -s jerk_wall_0="20" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s top_bottom_pattern="lines" -s material_break_retracted_position="-50" -s meshfix_fluid_motion_angle="15" -s switch_extruder_prime_speed="20" -s support_bottom_wall_count="0" -s machine_settings="0" -s retraction_hop_enabled="False" -s support_tree_min_height_to_model="3" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s bridge_wall_coast="100" -s ironing_flow="10.0" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s retraction_extra_prime_amount="0" -s layer_start_x="0.0" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s cool_fan_speed="100" -s machine_extruder_end_pos_x="0" -s machine_nozzle_offset_x="0" -s machine_endstop_positive_direction_x="False" -s support_tree_rest_preference="buildplate" -s acceleration_ironing="3000" -s support_roof_enable="False" -s raft_base_line_spacing="1.6" -s raft_smoothing="5" -s min_skin_width_for_expansion="4.898587196589413e-17" -s bridge_fan_speed_3="0" -s wall_transition_angle="10" -s skin_preshrink="0.8" -s raft_acceleration="3000" -s roofing_pattern="lines" -s infill_offset_x="0" -s support_tower_diameter="3.0" -s hole_xy_offset_max_diameter="0" -s support_roof_height="1" -s machine_steps_per_mm_y="50" -s material_flush_purge_speed="0.5" -s jerk_infill="20" -s support_brim_line_count="3" -s infill_overlap_mm="0.04" -s support_top_distance="0.1" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s roofing_line_width="0.4" -s skirt_brim_line_width="0.4" -s minimum_roof_area="1.0" -s extruder_prime_pos_abs="False" -s wipe_pause="0" -s skin_edge_support_layers="0" -s material_print_temperature="185.0" -s material_end_of_filament_purge_speed="0.5" -s support_xy_distance="0.7" -s support_bottom_stair_step_width="5.0" -s support_brim_width="1.2000000000000002" -s material_crystallinity="False" -s support_roof_line_distance="0.4" -s conical_overhang_enabled="False" -s support_tree_angle_slow="46.666666666666664" -s skirt_line_count="1" -s mesh_position_z="0" -s speed_support_infill="60" -s wall_line_width="0.4" -s hole_xy_offset="0" -s infill="0" -s skin_overlap_mm="0.02" -s bottom_skin_expand_distance="0.8" -s dual="0" -s retract_at_layer_change="False" -s travel="0" -s min_bead_width="0.34" -s support_line_distance="2.6666666666666665" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s gradual_support_infill_steps="0" -s acceleration_layer_0="3000" -s skin_line_width="0.4" -s raft_base_fan_speed="0" -s support_offset="0.0" -s prime_tower_wipe_enabled="True" -s speed_wall_x="60.0" -s prime_tower_line_width="0.4" -s roofing_monotonic="True" -s prime_tower_flow="100" -s speed_infill="60" -s cool_min_layer_time="5" -s roofing_material_flow="100" -s travel_avoid_supports="False" -s magic_fuzzy_skin_outside_only="False" -s small_feature_speed_factor="50" -s support_tree_tip_diameter="0.8" -s coasting_enable="False" -s top_bottom_thickness="0.8" -s lightning_infill_overhang_angle="40" -s speed_equalize_flow_width_factor="100.0" -s material_is_support_material="False" -s material_anti_ooze_retraction_speed="5" -s top_skin_expand_distance="0.8" -s infill_sparse_density="15" -s infill_overlap="10" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s support_infill_sparse_thickness="0.2" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="20" -s support_tree_max_diameter="25" -s bridge_skin_density_2="75" -s wipe_retraction_speed="25" -s support_conical_angle="30" -s jerk_support_infill="20" -s switch_extruder_retraction_speeds="20" -s top_bottom_pattern_0="lines" -s acceleration_roofing="3000" -s wall_0_inset="0" -s skirt_brim_minimal_length="250" -s support_connect_zigzags="True" -s support_interface_pattern="concentric" -s speed_wall_0="30.0" -s brim_line_count="20" -s support_interface_offset="0.0" -s jerk_wall_x="20" -s small_skin_width="0.8" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s wall_x_material_flow="100" -s support_bottom_stair_step_height="0.3" -s material_print_temperature_layer_0="185.0" -s raft_fan_speed="0" -s meshfix_keep_open_polygons="False" -s wall_overhang_speed_factor="100" -s material_surface_energy="100" -s jerk_support_roof="20" -s top_bottom="0" -s connect_infill_polygons="False" -s retraction_min_travel="0.8" -s support_line_width="0.4" -s group_outer_walls="True" -s raft_interface_line_width="0.8" -s wall_transition_length="0.4" -s acceleration_travel="5000" -s roofing_angles="[ ]" -s speed_wall="30.0" -s xy_offset_layer_0="0" -s skin_material_flow="100" -s machine_nozzle_temp_enabled="True" -s material_break_speed="25" -s wipe_retraction_retract_speed="25" -s wall_line_width_x="0.4" -s retraction_amount="6.5" -s support_join_distance="2.0" -s support_zag_skip_count="8" -s top_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s ironing_enabled="False" -s support_tree_angle="70" -s expand_skins_expand_distance="0.8" -s layer_start_y="0.0" -s machine_extruders_shared_nozzle_initial_retraction="0" -s raft_airgap="0.3" -s extruder_prime_pos_z="0" -s retraction_prime_speed="25" -s line_width="0.4" -s support_bottom_material_flow="100" -s default_material_print_temperature="200" -s skirt_brim_speed="30.0" -s coasting_speed="90" -s wall_0_material_flow="100" -s wipe_hop_amount="1" -s machine_heat_zone_length="16" -s z_seam_position="back" -s raft_jerk="20" -s support_pattern="zigzag" -s skin_edge_support_thickness="0" -s support_brim_enable="True" -s command_line_settings="0" -s raft_base_thickness="0.36" -s speed_layer_0="30.0" -s top_thickness="0.8" -s acceleration_wall_x="3000" -s infill_enable_travel_optimization="False" -s jerk_wall_0_roofing="20" -s retraction_retract_speed="25" -s wipe_hop_speed="10" -s retraction_hop_only_when_collides="False" -s raft_surface_layers="2" -s support_z_distance="0.1" -s minimum_bottom_area="1.0" -s acceleration_wall="3000" -s support_bottom_density="100" -s support_roof_line_width="0.4" -s material_flow_layer_0="100" -s raft_surface_fan_speed="0" -s raft_interface_acceleration="3000" -s retraction_hop_after_extruder_switch="True" -s ironing_inset="0.38" -s z_seam_x="125.0" -s extruder_nr="0" -s support_conical_enabled="False" -s cooling="0" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s material_flush_purge_length="60" -s min_infill_area="0" -s support_tree_branch_diameter="5" -s lightning_infill_straightening_angle="40" -s z_seam_y="255" -s infill_offset_y="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_support_interface="3000" -s conical_overhang_hole_size="0" -s jerk_travel="30" -s infill_line_distance="8.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s jerk_layer_0="20" -s retraction_speed="25" -s skirt_height="3" -s machine_feeder_wheel_diameter="10.0" -s wall_x_material_flow_roofing="100" -s jerk_print_layer_0="20" -s bottom_thickness="0.8" -s wall_0_material_flow_roofing="100" -s raft_surface_line_spacing="0.4" -s raft_base_acceleration="3000" -s support_bottom_angles="[ ]" -s wall_thickness="0.8" -s bridge_skin_speed="15.0" -s mold_roof_height="0.5" -s material_end_of_filament_purge_length="20" -s raft_surface_line_width="0.4" -s small_hole_max_size="0" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -s raft_interface_jerk="20" -s bridge_fan_speed="100" -s support_tree_top_rate="10" -s machine_steps_per_mm_z="50" -s infill_pattern="cubic" -s support_skip_zag_per_mm="20" -s gradual_infill_steps="0" -s support_interface_line_width="0.4" -s machine_nozzle_size="0.4" -s raft_base_jerk="20" -s minimum_support_area="0.0" -s wipe_retraction_prime_speed="25" -s support_tree_limit_branch_reach="True" -s acceleration_support_roof="3000" -s wall_line_width_0="0.4" -s support_bottom_height="1" -s raft_speed="30.0" -s speed_travel="120" -s material_break_temperature="50" -s prime_tower_raft_base_line_spacing="1.6" -s bridge_skin_speed_2="15.0" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_topbottom="20" -s material_anti_ooze_retracted_position="-4" -s support_angle="70" -s support="0" -s small_feature_speed_factor_0="50" -s raft_base_line_width="0.8" -s acceleration_topbottom="3000" -s jerk_support="20" -s support_interface_enable="False" -s meshfix_maximum_resolution="0.5" -s support_bottom_enable="False" -s blackmagic="0" -s support_infill_rate="15" -s z_seam_corner="z_seam_corner_inner" -s bridge_sparse_infill_max_density="0" -s cool_fan_enabled="True" -s platform_adhesion="0" -s conical_overhang_angle="50" -s clean_between_layers="False" -s cross_infill_pocket_size="8.0" -s support_use_towers="True" -s meshfix_union_all_remove_holes="False" -s jerk_wall="20" -s infill_before_walls="True" -s roofing_layer_count="0" -s support_bottom_pattern="concentric" -s ironing_monotonic="False" -s acceleration_infill="3000" -s speed_z_hop="10" -s skin_no_small_gaps_heuristic="False" -s experimental="0" -s support_bottom_line_width="0.4" -s initial_bottom_layers="4" -s wall_0_wipe_dist="0.2" -s material_break_preparation_retracted_position="-16" -s lightning_infill_prune_angle="40" -s material_standby_temperature="175" -s bridge_skin_density_3="80" -s raft_margin="15" -s bottom_skin_preshrink="0.8" -s support_tower_roof_angle="65" -s support_interface_angles="[ ]" -s brim_replaces_support="True" -s minimum_interface_area="1.0" -s bridge_enable_more_layers="True" -s machine_steps_per_mm_x="50" -s fill_outline_gaps="True" -s z_seam_type="sharpest_corner" -s max_skin_angle_for_expansion="90" -s support_xy_overrides_z="z_overrides_xy" -s material_break_preparation_speed="2" -s speed_support_bottom="40.0" -s material_final_print_temperature="175.0" -s bridge_skin_speed_3="15.0" -s mold_width="5" -s machine_nozzle_cool_down_speed="2.0" -s min_feature_size="0.1" -s wall_transition_filter_deviation="0.1" -s support_roof_pattern="concentric" -s support_interface_height="1" -s skirt_brim_material_flow="100" -s support_interface_material_flow="100" -s jerk_travel_layer_0="30.0" -s wipe_retraction_enable="True" -s machine_min_cool_heat_time_window="50.0" -s shell="0" -s infill_randomize_start_location="False" -s machine_extruder_end_pos_y="0" -s speed_roofing="30.0" -s support_skip_some_zags="False" -s support_roof_material_flow="100" -s acceleration_prime_tower="3000" -s infill_multiplier="1" -s raft_base_speed="22.5" -s wipe_brush_pos_x="100" -s wipe_retraction_extra_prime_amount="0" -s speed_prime_tower="60" -s jerk_roofing="20" -s skin_overlap="5" -s support_wall_count="0" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s meshfix_maximum_travel_resolution="0.8" -s meshfix_fluid_motion_small_distance="0.01" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s cool_lift_head="False" -s jerk_prime_tower="20" -s infill_support_enabled="False" -s raft_surface_acceleration="3000" -s raft_interface_thickness="0.30000000000000004" -s slicing_tolerance="middle" -s brim_outside_only="True" -s initial_layer_line_width_factor="100.0" -s jerk_wall_x_roofing="20" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s infill_wall_line_count="0" -s speed_print="60" -s cool_min_temperature="185" -s magic_fuzzy_skin_thickness="0.3" -s material_initial_print_temperature="185" -s brim_inside_margin="2.5" -s meshfix_fluid_motion_enabled="True" -s machine_extruder_end_pos_abs="False" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.1" -s acceleration_wall_0_roofing="3000" -s speed_topbottom="30.0" -s ironing_line_spacing="0.1" -s bridge_skin_material_flow_3="110" -s skin_monotonic="False" -s speed_wall_0_roofing="30.0" -s wall_material_flow="100" -s support_xy_distance_overhang="0.2" -s material_flow="100" -s bridge_wall_material_flow="50" -s support_interface_density="100" -s small_skin_on_surface="False" -s acceleration_support_infill="3000" -s mesh_position_y="0" -s retraction_hop="1" -s cool_fan_full_layer="2" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s meshfix_fluid_motion_shift_distance="0.1" -s wall_line_count="2" -s cross_support_density_image="" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s optimize_wall_printing_order="False" -s magic_fuzzy_skin_point_dist="0.8" -s extruder_prime_pos_x="0" -s bridge_wall_speed="15.0" -s bottom_layers="4" -s material_extrusion_cool_down_speed="0.7" -s acceleration_print_layer_0="3000" -s support_bottom_line_distance="0.4" -s ironing_pattern="zigzag" -s switch_extruder_retraction_amount="16" -s material="0" -s raft_surface_speed="30.0" -s support_roof_wall_count="0" -s bridge_skin_support_threshold="50" -s support_tree_bp_diameter="7.5" -s infill_sparse_thickness="0.2" -s support_supported_skin_fan_speed="100" -s travel_avoid_distance="0.625" -s interlocking_beam_width="0.8" -s bridge_skin_material_flow="60" -s meshfix_maximum_deviation="0.025" -s wall_transition_filter_distance="100" -s support_conical_min_width="5.0" -s brim_smart_ordering="True" -s acceleration_skirt_brim="3000" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s machine_nozzle_heat_up_speed="2.0" -s bridge_skin_density="100" -s wipe_retraction_amount="6.5" -s mold_enabled="False" -s support_roof_offset="0.0" -s meshfix="0" -s jerk_skirt_brim="20" -s material_break_preparation_temperature="185.0" -s material_maximum_park_duration="300" -s cool_fan_speed_max="100" -s retraction_extrusion_window="6.5" -s extruder_prime_pos_y="0" -g -e0 -l "0" -s extruder_nr="0"
2024-01-17 19:40:19,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend]
2024-01-17 19:40:19,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.771] [info] Progress: start accomplished in 0.000s
2024-01-17 19:40:19,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.771] [info] Starting slice...
2024-01-17 19:40:19,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.771] [info] Slicing model...
2024-01-17 19:40:19,774 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.774] [info] Slice of mesh took 0.003 seconds
2024-01-17 19:40:19,778 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.778] [info] Make polygons took 0.005 seconds
2024-01-17 19:40:19,779 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.778] [info] Progress: slice accomplished in 0.008s
2024-01-17 19:40:19,779 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.778] [info] Starting layerparts...
2024-01-17 19:40:19,782 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.783] [info] Progress: layerparts accomplished in 0.004s
2024-01-17 19:40:19,782 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.783] [info] Starting inset+skin...
2024-01-17 19:40:19,831 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.831] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints.
2024-01-17 19:40:19,856 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.856] [info] Progress: inset+skin accomplished in 0.074s
2024-01-17 19:40:19,857 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.856] [info] Starting support...
2024-01-17 19:40:19,883 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.883] [info] Progress: support accomplished in 0.027s
2024-01-17 19:40:19,884 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:19.883] [info] Starting export...
2024-01-17 19:40:20,288 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.288] [info] ┌ Layer export [0] accomplished in 0.404s
2024-01-17 19:40:20,288 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.288] [info] └── Mesh 0: 0.398s
2024-01-17 19:40:20,289 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.289] [info] ┌ Layer export [1] accomplished in 0.405s
2024-01-17 19:40:20,289 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.289] [info] └── Mesh 0: 0.404s
2024-01-17 19:40:20,289 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.290] [info] ┌ Layer export [2] accomplished in 0.402s
2024-01-17 19:40:20,289 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.290] [info] └── Mesh 0: 0.401s
2024-01-17 19:40:20,410 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.410] [info] ┌ Layer export [3] accomplished in 0.524s
2024-01-17 19:40:20,410 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.410] [info] └── Mesh 0: 0.521s
2024-01-17 19:40:20,416 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.416] [info] ┌ Layer export [4] accomplished in 0.409s
2024-01-17 19:40:20,416 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.416] [info] └── Mesh 0: 0.409s
2024-01-17 19:40:20,418 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.418] [info] ┌ Layer export [5] accomplished in 0.395s
2024-01-17 19:40:20,418 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.418] [info] └── Mesh 0: 0.394s
2024-01-17 19:40:20,445 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.446] [info] ┌ Layer export [6] accomplished in 0.477s
2024-01-17 19:40:20,446 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.446] [info] └── Mesh 0: 0.473s
2024-01-17 19:40:20,464 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.464] [info] ┌ Layer export [7] accomplished in 0.512s
2024-01-17 19:40:20,464 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.464] [info] └── Mesh 0: 0.509s
2024-01-17 19:40:20,481 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.482] [info] ┌ Layer export [8] accomplished in 0.501s
2024-01-17 19:40:20,482 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.482] [info] └── Mesh 0: 0.497s
2024-01-17 19:40:20,499 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.499] [info] ┌ Layer export [9] accomplished in 0.549s
2024-01-17 19:40:20,500 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.499] [info] └── Mesh 0: 0.548s
2024-01-17 19:40:20,520 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.520] [info] ┌ Layer export [10] accomplished in 0.519s
2024-01-17 19:40:20,520 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.520] [info] └── Mesh 0: 0.517s
2024-01-17 19:40:20,529 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.529] [info] ┌ Layer export [11] accomplished in 0.490s
2024-01-17 19:40:20,529 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.529] [info] └── Mesh 0: 0.487s
2024-01-17 19:40:20,539 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.539] [info] ┌ Layer export [12] accomplished in 0.506s
2024-01-17 19:40:20,539 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.539] [info] └── Mesh 0: 0.503s
2024-01-17 19:40:20,551 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.551] [info] ┌ Layer export [13] accomplished in 0.485s
2024-01-17 19:40:20,551 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.551] [info] └── Mesh 0: 0.482s
2024-01-17 19:40:20,562 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.562] [info] ┌ Layer export [14] accomplished in 0.502s
2024-01-17 19:40:20,562 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.562] [info] └── Mesh 0: 0.500s
2024-01-17 19:40:20,580 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.580] [info] ┌ Layer export [15] accomplished in 0.503s
2024-01-17 19:40:20,580 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.580] [info] └── Mesh 0: 0.501s
2024-01-17 19:40:20,608 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.608] [info] ┌ Layer export [16] accomplished in 0.493s
2024-01-17 19:40:20,609 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.608] [info] └── Mesh 0: 0.489s
2024-01-17 19:40:20,621 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.621] [info] ┌ Layer export [17] accomplished in 0.505s
2024-01-17 19:40:20,621 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.621] [info] └── Mesh 0: 0.502s
2024-01-17 19:40:20,632 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.632] [info] ┌ Layer export [18] accomplished in 0.492s
2024-01-17 19:40:20,633 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.632] [info] └── Mesh 0: 0.486s
2024-01-17 19:40:20,644 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.644] [info] ┌ Layer export [19] accomplished in 0.452s
2024-01-17 19:40:20,644 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.644] [info] └── Mesh 0: 0.450s
2024-01-17 19:40:20,657 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.657] [info] ┌ Layer export [20] accomplished in 0.506s
2024-01-17 19:40:20,657 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.657] [info] └── Mesh 0: 0.504s
2024-01-17 19:40:20,661 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.661] [info] ┌ Layer export [21] accomplished in 0.504s
2024-01-17 19:40:20,661 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.661] [info] └── Mesh 0: 0.502s
2024-01-17 19:40:20,666 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.667] [info] ┌ Layer export [22] accomplished in 0.512s
2024-01-17 19:40:20,667 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.667] [info] └── Mesh 0: 0.510s
2024-01-17 19:40:20,672 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.672] [info] ┌ Layer export [23] accomplished in 0.506s
2024-01-17 19:40:20,672 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.672] [info] └── Mesh 0: 0.504s
2024-01-17 19:40:20,675 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.675] [info] ┌ Layer export [24] accomplished in 0.550s
2024-01-17 19:40:20,675 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.675] [info] └── Mesh 0: 0.549s
2024-01-17 19:40:20,677 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.677] [info] ┌ Layer export [25] accomplished in 0.508s
2024-01-17 19:40:20,677 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.677] [info] └── Mesh 0: 0.506s
2024-01-17 19:40:20,680 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.680] [info] ┌ Layer export [26] accomplished in 0.487s
2024-01-17 19:40:20,680 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.680] [info] └── Mesh 0: 0.485s
2024-01-17 19:40:20,682 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.682] [info] ┌ Layer export [27] accomplished in 0.474s
2024-01-17 19:40:20,682 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.682] [info] └── Mesh 0: 0.471s
2024-01-17 19:40:20,683 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.684] [info] ┌ Layer export [28] accomplished in 0.486s
2024-01-17 19:40:20,683 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.684] [info] └── Mesh 0: 0.482s
2024-01-17 19:40:20,685 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.685] [info] ┌ Layer export [29] accomplished in 0.494s
2024-01-17 19:40:20,685 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.685] [info] └── Mesh 0: 0.491s
2024-01-17 19:40:20,686 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.687] [info] ┌ Layer export [30] accomplished in 0.520s
2024-01-17 19:40:20,686 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.687] [info] └── Mesh 0: 0.518s
2024-01-17 19:40:20,689 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.690] [info] ┌ Layer export [31] accomplished in 0.507s
2024-01-17 19:40:20,689 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.690] [info] └── Mesh 0: 0.505s
2024-01-17 19:40:20,691 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.692] [info] ┌ Layer export [32] accomplished in 0.117s
2024-01-17 19:40:20,691 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.692] [info] └── Mesh 0: 0.116s
2024-01-17 19:40:20,692 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.693] [info] ┌ Layer export [33] accomplished in 0.134s
2024-01-17 19:40:20,692 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.693] [info] └── Mesh 0: 0.130s
2024-01-17 19:40:20,693 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.694] [info] ┌ Layer export [34] accomplished in 0.133s
2024-01-17 19:40:20,693 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.694] [info] └── Mesh 0: 0.130s
2024-01-17 19:40:20,695 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.696] [info] ┌ Layer export [35] accomplished in 0.147s
2024-01-17 19:40:20,695 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.696] [info] └── Mesh 0: 0.141s
2024-01-17 19:40:20,697 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.697] [info] ┌ Layer export [36] accomplished in 0.113s
2024-01-17 19:40:20,697 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:20.697] [info] └── Mesh 0: 0.111s
2024-01-17 19:40:21,270 - WARNING - [MainThread] UM.Backend.Backend._onSocketError [267]: Unhandled socket error ErrorCode.ReceiveFailedError
2024-01-17 19:40:21,270 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first.
2024-01-17 19:40:21,271 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [410]: Attempting to kill the engine process
2024-01-17 19:40:21,272 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [416]: Killing engine process
2024-01-17 19:40:21,272 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [419]: Engine process is killed. Received return code 3221225477
2024-01-17 19:40:21,272 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first.
2024-01-17 19:40:21,273 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend._onSocketError [689]: A socket error caused the connection to be reset
2024-01-17 19:40:21,273 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening
2024-01-17 19:40:21,275 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: C:\Program Files\UltiMaker Cura 5.6.0\CuraEngine.exe
2024-01-17 19:40:21,275 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['C:\\Program Files\\UltiMaker Cura 5.6.0\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2024-01-17 19:40:21,302 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:21.302] [info] Connecting to 127.0.0.1:49674
2024-01-17 19:40:21,303 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected
2024-01-17 19:40:21,303 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674
2024-01-17 19:40:21,414 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-01-17 19:40:21.414] [info] Connected to 127.0.0.1:49674
Cura Version
5.6.0
Operating System
Windows 11 Pro
Printer
Anycubic Vyper
Name abnormal settings
I selected 15% infill and tree supports on buildplate with 70% overhang angle. But also default settings lead to the error
Describe model location
I tried moving and rotating, it didn't help
Describe your model
Base.STL is watertight and consists of 2 submeshes. I also tried fix holes and normals as well as splitting the model submeshes in two and deleting the smaller one
Add your .zip here ⬇️
AV_Base.zip