Open moviebrain opened 5 months ago
Thanks for the report. 5.6.0 had definite problems slicing some models. I didn't have any trouble slicing this in 5.7.0 which all around appears to be much better. Use the "Help | Show Configuration Folder" command to find the Cura.log file. Zip that up and post the zip folder here. There might be a clue in the log as to what is going on.
2024-04-07 06:46:11,142 - DEBUG - [zeroconf-ServiceBrowser-_octoprint._tcp-21224] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [416]: Bonjour service added: octopi._octoprint._tcp.local 2024-04-07 06:46:23,531 - INFO - [MainThread] cura.CuraApplication.resetAllTranslation [1494]: Resetting all scene translations 2024-04-07 06:46:23,542 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=1) SetTransformOp.(node=<CuraSceneNode object: 'Flexi-Rex-improved.stl'>), took 9ms 2024-04-07 06:46:24,971 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [331]: Creating thumbnail image (just before slice)... 2024-04-07 06:46:24,972 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective. 2024-04-07 06:46:24,974 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.7.0\share\cura\resources\shaders\overhang.shader]... 2024-04-07 06:46:24,976 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.7.0\share\cura\resources\shaders\transparent_object.shader]... 2024-04-07 06:46:24,982 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.7.0\share\cura\resources\shaders\striped.shader]... 2024-04-07 06:46:25,041 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [348]: Starting to slice... 2024-04-07 06:46:25,041 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [368]: Going to slice build plate [0]! 2024-04-07 06:46:25,042 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first. 2024-04-07 06:46:25,229 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening 2024-04-07 06:46:25,260 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: C:\Program Files\UltiMaker Cura 5.7.0\CuraEngine.exe 2024-04-07 06:46:25,265 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['C:\Program Files\UltiMaker Cura 5.7.0\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2024-04-07 06:46:25,324 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.323] [info] Sentry url: https://734f9ec9024f73e53701d59c3ffddfe3@o323038.ingest.sentry.io/4506257745510401 2024-04-07 06:46:25,333 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.323] [info] Sentry config path: C:/Users/*/AppData/Roaming/cura/.sentry-native 2024-04-07 06:46:25,337 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected 2024-04-07 06:46:25,339 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.323] [info] Starting sentry 2024-04-07 06:46:25,340 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674 2024-04-07 06:46:25,340 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.334] [info] Connecting to 127.0.0.1:49674 2024-04-07 06:46:25,371 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [580]: Sending slice message took 0.329120397567749 seconds 2024-04-07 06:46:25,440 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.440] [info] Connected to 127.0.0.1:49674 2024-04-07 06:46:25,611 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.610] [info] All settings: -s infill_extruder_nr="-1" -s bridge_sparse_infill_max_density="0" -s quality_changes_name="WDI3_Flexi-Rex-improved(1) TPU" -s speed_wall_x="60.0" -s prime_tower_wipe_enabled="True" -s support_offset="0.8400000000000001" -s wall_0_material_flow_roofing="100" -s support_roof_pattern="concentric" -s support_interface_height="1" -s brim_gap="0" -s speed="0" -s zig_zaggify_infill="False" -s support_roof_angles="[ ]" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s support_roof_density="100" -s bridge_skin_support_threshold="50" -s anti_overhang_mesh="False" -s support_roof_wall_count="0" -s machine_max_acceleration_e="10000" -s support_bottom_stair_step_width="5.0" -s material_crystallinity="False" -s machine_name="Wanhao Duplicator i3" -s support_brim_width="1.98" -s support_xy_distance="0.5" -s arcwelder_maximum_radius="9999" -s material_brand="empty_brand" -s extruder_prime_pos_x="0" -s support_interface_density="100" -s nozzle_disallowed_areas="[]" -s wipe_retraction_amount="6.5" -s prime_tower_max_bridging_distance="5" -s support_tower_maximum_supported_diameter="3.0" -s wall_overhang_angle="90" -s machine_endstop_positive_direction_y="False" -s skin_material_flow_layer_0="100" -s wipe_hop_enable="False" -s magic_fuzzy_skin_enabled="False" -s min_even_wall_line_width="0.34" -s cross_infill_density_image="" -s switch_extruder_extra_prime_amount="0" -s arcwelder_extrusion_rate_variance="5" -s jerk_print="20" -s build_volume_temperature="0" -s infill_support_enabled="False" -s draft_shield_dist="10" -s support_meshes_present="False" -s cool_fan_full_layer="2" -s _plugincuraenginegradualflow0_1_0reset_flow_duration="2.0" -s material_flush_purge_length="60" -s speed_support_interface="10.0" -s brim_width="8.0" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s resolution="0" -s cool_min_speed="10" -s flow_rate_max_extrusion_offset="0" -s machine_nozzle_id="unknown" -s machine_use_extruder_offset_to_offset_coords="True" -s acceleration_skirt_brim="3000" -s support_fan_enable="False" -s prime_tower_position_y="198.535" -s material_break_preparation_temperature="210" -s support_roof_offset="0.0" -s mold_enabled="False" -s ooze_shield_dist="2" -s gantry_height="200" -s small_skin_on_surface="False" -s machine_firmware_retract="False" -s interlocking_orientation="22.5" -s ironing_enabled="False" -s support_line_distance="2.933333333333333" -s min_bead_width="0.34" -s meshfix_union_all="True" -s raft_interface_line_spacing="1.08" -s material_anti_ooze_retraction_speed="5" -s acceleration_wall="3000" -s support_structure="normal" -s connect_infill_polygons="False" -s top_bottom="0" -s jerk_support_roof="20" -s acceleration_infill="3000" -s machine_shape="rectangular" -s relative_extrusion="False" -s support_interface_extruder_nr="0" -s bridge_wall_speed="15.0" -s retraction_amount="6.5" -s infill_mesh="False" -s support_join_distance="2.0" -s support_zag_skip_count="7" -s support_skip_some_zags="False" -s brim_location="outside" -s coasting_enable="False" -s support_tree_tip_diameter="0.88" -s ironing_pattern="zigzag" -s brim_line_count="20" -s draft_shield_enabled="False" -s speed_wall_0="30.0" -s support_interface_offset="0.0" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="2.933333333333333" -s material_break_preparation_speed="2" -s speed_support_bottom="10.0" -s raft_smoothing="5" -s machine_max_acceleration_x="9000" -s raft_base_line_spacing="1.6" -s support_roof_enable="False" -s machine_max_jerk_z="0.4" -s support_roof_line_width="0.44" -s support_bottom_density="100" -s remove_empty_first_layers="True" -s speed_support_infill="15" -s mesh_position_z="0" -s speed_infill="60" -s prime_tower_flow="100" -s support_tree_min_height_to_model="3" -s retraction_hop_enabled="False" -s bridge_fan_speed="100" -s machine_acceleration="4000" -s ironing_inset="0.38" -s z_seam_x="100.0" -s top_bottom_extruder_nr="-1" -s bv_temp_anomaly_limit="10.0" -s retraction_speed="25" -s roofing_material_flow="100" -s travel_avoid_supports="False" -s magic_fuzzy_skin_outside_only="False" -s wipe_move_distance="20" -s layer_0_z_overlap="0.15" -s raft_interface_fan_speed="0" -s cool_fan_speed_0="0" -s speed_print_layer_0="30.0" -s material_shrinkage_percentage_xy="100.0" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s skin_edge_support_thickness="0" -s support_pattern="zigzag" -s machine_center_is_zero="False" -s skirt_brim_extruder_nr="-1" -s initial_bottom_layers="5" -s material_flow_layer_0="100" -s raft_surface_fan_speed="0" -s bridge_wall_coast="100" -s _plugincuraenginegradualflow0_1_0gradual_flow_enabled="False" -s material_bed_temperature_layer_0="30" -s alternate_extra_perimeter="False" -s retraction_extra_prime_amount="0" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s layer_start_x="0.0" -s bridge_skin_material_flow="60" -s arcwelder_allow_travel_arcs="False" -s dual="0" -s bottom_skin_expand_distance="0.8" -s skin_overlap_mm="0.02" -s wall_extruder_nr="-1" -s support_infill_angles="[ ]" -s inset_direction="inside_out" -s speed_wall_0_roofing="30.0" -s draft_shield_height_limitation="full" -s wall_line_width_x="0.4" -s minimum_roof_area="1.0" -s extruder_prime_pos_abs="False" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s cross_support_density_image="" -s machine_min_cool_heat_time_window="50.0" -s print_temp_warn_limit="3.0" -s quality_name="Fine" -s machine_extruders_share_nozzle="False" -s machine_steps_per_mm_z="50" -s z_seam_position="back" -s material_print_temperature_layer_0="210" -s raft_wall_count="1" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s skirt_height="3" -s wall_x_material_flow_roofing="100" -s machine_feeder_wheel_diameter="10.0" -s wall_line_count="2" -s prime_tower_mode="interleaved" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s jerk_wall_0="20" -s material_break_temperature="50" -s machine_nozzle_expansion_angle="45" -s machine_max_acceleration_y="9000" -s support_interface_line_width="0.44" -s gradual_infill_steps="0" -s machine_height="200" -s wall_0_extruder_nr="-1" -s top_bottom_thickness="0.8" -s lightning_infill_overhang_angle="40" -s speed_equalize_flow_width_factor="100.0" -s material_is_support_material="False" -s acceleration_print_layer_0="3000" -s infill_sparse_density="20" -s infill_overlap="10" -s bridge_skin_density_3="80" -s travel_speed="120" -s prime_tower_brim_enable="False" -s support_angle="60" -s support="0" -s skin_preshrink="0.8" -s raft_acceleration="3000" -s lightning_infill_prune_angle="40" -s support_bottom_height="1" -s wall_0_material_flow_layer_0="100" -s infill_material_flow="100" -s skirt_line_count="1" -s conical_overhang_enabled="False" -s support_tree_angle_slow="40.0" -s raft_airgap="0.3" -s raft_base_line_width="0.8" -s acceleration_topbottom="3000" -s small_feature_speed_factor_0="50" -s jerk_travel_enabled="True" -s raft_interface_line_width="0.88" -s group_outer_walls="True" -s acceleration_travel="5000" -s wall_transition_length="0.4" -s support_supported_skin_fan_speed="100" -s infill_sparse_thickness="0.16" -s arcwelder_firmware_compensation="False" -s material_bed_temp_prepend="False" -s expand_skins_expand_distance="0.8" -s machine_width="200" -s support_tree_angle="60" -s optimize_wall_printing_order="True" -s small_skin_width="0.8" -s _plugincuraenginegradualflow0_1_0max_flow_acceleration="1" -s jerk_wall_x="20" -s raft_interface_margin="15" -s support_extruder_nr="0" -s skin_angles="[ ]" -s speed_prime_tower="60" -s jerk_roofing="20" -s support_infill_sparse_thickness="0.16" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="20" -s speed_print="60" -s machine_heat_zone_length="16" -s material_bed_temperature="30" -s machine_nozzle_temp_enabled="True" -s material_break_speed="25" -s wipe_retraction_retract_speed="25" -s raft_surface_speed="7.5" -s retraction_prime_speed="25" -s extruder_prime_pos_z="0" -s print_sequence="all_at_once" -s prime_tower_enable="False" -s flow_rate_extrusion_offset_factor="100" -s support_interface_pattern="concentric" -s speed_wall="30.0" -s xy_offset_layer_0="0" -s skin_material_flow="100" -s bottom_thickness="0.8" -s raft_base_wall_count="1" -s flow_anomaly_limit="25.0" -s adaptive_layer_height_enabled="False" -s machine_steps_per_mm_e="1600" -s sub_div_rad_add="0.4" -s support_brim_enable="True" -s command_line_settings="0" -s raft_base_thickness="0.36" -s material_bed_temp_wait="True" -s support_bottom_enable="False" -s roofing_line_width="0.4" -s infill_support_angle="40" -s multiple_mesh_overlap="0.15" -s interlocking_boundary_avoidance="2" -s skin_edge_support_layers="0" -s wipe_pause="0" -s skin_no_small_gaps_heuristic="False" -s speed_z_hop="10" -s cutting_mesh="False" -s small_feature_speed_factor="50" -s infill_overlap_mm="0.04" -s support_top_distance="0.1" -s cool_fan_speed="100.0" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s retraction_hop_after_extruder_switch="True" -s raft_base_acceleration="3000" -s raft_surface_line_spacing="0.44" -s support_bottom_angles="[ ]" -s wall_0_wipe_dist="0.2" -s material_break_preparation_retracted_position="-16" -s arcwelder_g90_influences_extruder="False" -s support_conical_enabled="False" -s magic_spiralize="False" -s machine_start_gcode="M82 ;absolute extrusion mode 2024-04-07 06:46:25,611 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M140 S30 ;Start heating bed 2024-04-07 06:46:25,611 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M190 S30 ;Wait for bed to reach temp before proceeding 2024-04-07 06:46:25,612 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M104 S160; start warming extruder to 160 2024-04-07 06:46:25,612 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M280 P0 S160 ; BLTouch alarm release 2024-04-07 06:46:25,612 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G4 P100 ; delay for bltouch 2024-04-07 06:46:25,613 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G34 ; auto level z axis 2024-04-07 06:46:25,613 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G28 ; Home all axis 2024-04-07 06:46:25,614 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G29 A; Auto bed-level active (BL-Touch) 2024-04-07 06:46:25,614 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 ; Reset Extruder 2024-04-07 06:46:25,615 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position 2024-04-07 06:46:25,615 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M104 S230 ;Start heating extruder 2024-04-07 06:46:25,615 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M109 S230 ;Wait for extruder to reach temp before 2024-04-07 06:46:25,616 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] ; G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed 2024-04-07 06:46:25,616 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line 2024-04-07 06:46:25,617 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little 2024-04-07 06:46:25,617 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line 2024-04-07 06:46:25,617 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 ; Reset Extruder 2024-04-07 06:46:25,618 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed 2024-04-07 06:46:25,618 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G92 E0 2024-04-07 06:46:25,618 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 F2000 2024-04-07 06:46:25,619 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M900 K.11 ; SET LIN ADV 2024-04-07 06:46:25,619 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] ;Put printing message on LCD screen 2024-04-07 06:46:25,619 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M117 Printing..." -s material_no_load_move_factor="0.940860215" -s small_feature_max_length="0.0" -s user_defined_print_order_enabled="False" -s material_adhesion_tendency="10" -s print_temp_anomaly_limit="7.0" -s zig_zaggify_support="False" -s mesh_position_x="0" -s skirt_brim_minimal_length="250" -s wall_0_inset="0" -s gradual_support_infill_step_height="1" -s support_bottom_stair_step_min_slope="10.0" -s raft_base_speed="5.625" -s arcwelder_enable="False" -s support_enable="False" -s support_interface_angles="[ ]" -s raft_interface_remove_inside_corners="False" -s skin_monotonic="False" -s bridge_skin_material_flow_3="110" -s machine_max_acceleration_z="100" -s acceleration_support_bottom="3000" -s acceleration_print="3000" -s material_name="empty" -s retraction_hop_after_extruder_switch_height="1" -s bridge_skin_speed_2="15.0" -s acceleration_support="3000" -s machine_scale_fan_speed_zero_to_one="False" -s adhesion_extruder_nr="-1" -s wipe_retraction_speed="25" -s bridge_skin_density_2="75" -s support_tree_max_diameter="25" -s lightning_infill_straightening_angle="40" -s z_seam_y="200" -s support_tree_branch_diameter="5" -s material_break_retracted_position="-50" -s material_shrinkage_percentage_z="100.0" -s raft_interface_acceleration="3000" -s arcwelder_resolution="0.05" -s raft_surface_acceleration="3000" -s small_hole_max_size="0" -s acceleration_wall_x_roofing="3000" -s roofing_extruder_nr="-1" -s speed_travel_layer_0="60.0" -s default_material_bed_temperature="80" -s acceleration_wall_0_roofing="3000" -s support_bottom_offset="0.0" -s infill_angles="[ ]" -s support_tree_branch_diameter_angle="7" -s retraction_combing="no_outer_surfaces" -s infill_line_distance="4.0" -s material_shrinkage_percentage="100.0" -s conical_overhang_hole_size="0" -s jerk_travel="30" -s min_infill_area="0" -s flow_warn_limit="15.0" -s material_final_print_temperature="195" -s bridge_skin_speed_3="15.0" -s mold_width="5" -s roofing_angles="[ ]" -s cross_infill_pocket_size="4.0" -s support_use_towers="True" -s ironing_flow="10.0" -s infill_enable_travel_optimization="False" -s acceleration_travel_enabled="True" -s support_roof_material_flow="100" -s support_interface_priority="interface_area_overwrite_support_area" -s machine_max_jerk_xy="20.0" -s mesh_position_y="0" -s machine_max_jerk_e="5.0" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.1" -s prime_tower_base_curve_magnitude="4" -s support_interface_enable="True" -s acceleration_prime_tower="3000" -s infill_multiplier="1" -s raft_interface_speed="5.625" -s material_diameter="2.85" -s min_feature_size="0.1" -s machine_nozzle_cool_down_speed="2.0" -s wall_0_material_flow="100" -s coasting_speed="90" -s bridge_wall_min_length="1.9" -s skirt_brim_speed="30.0" -s jerk_support_infill="20" -s support_conical_angle="30" -s switch_extruder_retraction_speeds="20" -s wipe_retraction_extra_prime_amount="0" -s arcwelder_allow_dynamic_precision="False" -s top_skin_expand_distance="0.8" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_support_interface="3000" -s machine_max_feedrate_y="299792458000" -s meshfix_maximum_travel_resolution="0.8" -s material_surface_energy="100" -s bridge_wall_material_flow="50" -s minimum_polygon_circumference="0.4" -s meshfix_maximum_deviation="0.025" -s hole_xy_offset_max_diameter="0" -s support_tower_diameter="3.0" -s material_extrusion_cool_down_speed="0.7" -s bottom_layers="5" -s arcwelder_default_e_precision="5" -s raft_surface_extruder_nr="0" -s ironing_only_highest_layer="False" -s support_line_width="0.44" -s machine_max_feedrate_z="299792458000" -s speed_topbottom="30.0" -s skirt_gap="3" -s machine_steps_per_mm_y="50" -s skirt_brim_line_width="0.4" -s machine_max_feedrate_x="299792458000" -s arcwelder_default_xyz_precision="3" -s material_print_temperature="210" -s material_end_of_filament_purge_speed="0.5" -s slicing_tolerance="middle" -s support_bottom_extruder_nr="0" -s bridge_skin_density="100" -s wall_overhang_speed_factor="100" -s travel_avoid_distance="0.625" -s time="06:46:25" -s machine_always_write_active_tool="False" -s acceleration_ironing="3000" -s minimum_support_area="0.0" -s raft_base_jerk="20" -s machine_nozzle_size="0.4" -s wall_x_material_flow_layer_0="100" -s skirt_brim_material_flow="100" -s infill_mesh_order="0" -s infill_randomize_start_location="False" -s lightning_infill_support_angle="40" -s top_bottom_pattern_0="lines" -s acceleration_roofing="3000" -s xy_offset="0" -s hole_xy_offset="0" -s infill="0" -s support_z_distance="0.1" -s minimum_bottom_area="1.0" -s raft_surface_layers="2" -s raft_surface_margin="15" -s prime_tower_size="0" -s cooling="0" -s wall_distribution_count="1" -s ooze_shield_enabled="False" -s interlocking_depth="2" -s acceleration_wall_x="3000" -s speed_layer_0="30.0" -s top_thickness="0.8" -s line_width="0.4" -s speed_support="15" -s machine_extruders_shared_nozzle_initial_retraction="0" -s default_material_print_temperature="210" -s meshfix_union_all_remove_holes="False" -s jerk_wall="20" -s ironing_line_spacing="0.1" -s support_infill_extruder_nr="0" -s bridge_skin_speed="15.0" -s wall_thickness="0.8" -s raft_margin="15" -s raft_base_remove_inside_corners="False" -s adhesion_type="none" -s acceleration_support_infill="3000" -s support_xy_distance_overhang="0.2" -s retract_at_layer_change="False" -s bv_temp_warn_limit="7.5" -s print_bed_temperature="30" -s travel="0" -s raft_surface_smoothing="5" -s raft_interface_smoothing="5" -s support_bottom_wall_count="0" -s switch_extruder_prime_speed="20" -s meshfix_fluid_motion_angle="15" -s raft_surface_wall_count="0" -s meshfix_fluid_motion_enabled="True" -s bottom_skin_preshrink="0.8" -s jerk_infill="20" -s prime_tower_base_height="0.16" -s raft_base_fan_speed="0" -s machine_heated_bed="True" -s skin_line_width="0.4" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s raft_base_extruder_nr="0" -s roofing_pattern="lines" -s max_extrusion_before_wipe="10" -s support_roof_height="1" -s wall_x_extruder_nr="-1" -s wipe_retraction_enable="True" -s machine_nozzle_heat_up_speed="2.0" -s material="0" -s cool_lift_head="False" -s day="Sun" -s support_mesh_drop_down="True" -s interlocking_enable="False" -s jerk_layer_0="20" -s meshfix_maximum_extrusion_area_deviation="50000" -s material_anti_ooze_retracted_position="-4" -s jerk_topbottom="20" -s wipe_brush_pos_x="100" -s adaptive_layer_height_threshold="0.2" -s print_temperature="210" -s material_type="empty" -s acceleration_travel_layer_0="5000.0" -s coasting_min_volume="0.8" -s speed_support_roof="10.0" -s speed_wall_x_roofing="60.0" -s adaptive_layer_height_variation_step="0.01" -s support_roof_extruder_nr="0" -s support_skip_zag_per_mm="20" -s infill_pattern="grid" -s prime_tower_position_x="198.535" -s material_print_temp_wait="True" -s raft_base_margin="15" -s support_mesh="False" -s prime_tower_base_size="8.0" -s speed_slowdown_layers="2" -s machine_disallowed_areas="[]" -s support_xy_overrides_z="z_overrides_xy" -s raft_surface_line_width="0.44" -s draft_shield_height="10" -s mold_roof_height="0.5" -s material_end_of_filament_purge_length="20" -s retraction_hop_only_when_collides="False" -s support_tree_limit_branch_reach="True" -s roofing_monotonic="True" -s prime_tower_line_width="0.4" -s meshfix_fluid_motion_small_distance="0.01" -s retraction_extrusion_window="6.5" -s carve_multiple_volumes="False" -s support_roof_line_distance="0.44" -s smooth_spiralized_contours="True" -s meshfix="0" -s support_wall_count="0" -s wall_transition_filter_deviation="0.1" -s cool_min_layer_time="5" -s center_object="False" -s initial_layer_line_width_factor="100.0" -s layer_height_0="0.3" -s speed_travel="120" -s extruder_prime_pos_y="0" -s material_maximum_park_duration="300" -s retraction_combing_max_distance="0" -s ppr_enable="False" -s retraction_count_max="90" -s skin_outline_count="1" -s z_seam_relative="False" -s support_interface_wall_count="0" -s meshfix_keep_open_polygons="False" -s layer_height="0.16" -s raft_fan_speed="0" -s machine_show_variants="False" -s support_bottom_line_distance="0.44" -s speed_roofing="30.0" -s ironing_monotonic="False" -s speed_ironing="20.0" -s jerk_prime_tower="20" -s brim_replaces_support="True" -s minimum_interface_area="1.0" -s arcwelder_min_arc_segment="12" -s infill_offset_y="0" -s raft_surface_monotonic="True" -s retraction_retract_speed="25" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s jerk_ironing="20" -s raft_surface_remove_inside_corners="False" -s retraction_min_travel="0.8" -s mold_angle="40" -s support_material_flow="100" -s infill_line_width="0.4" -s jerk_support_interface="20" -s jerk_support_bottom="20" -s support_bottom_stair_step_height="0.3" -s raft_base_smoothing="5" -s wall_x_material_flow="100" -s switch_extruder_retraction_amount="16" -s blackmagic="0" -s cool_fan_full_at_height="0.3" -s meshfix_maximum_resolution="0.5" -s raft_interface_wall_count="0" -s wipe_hop_speed="10" -s machine_endstop_positive_direction_z="True" -s bridge_enable_more_layers="True" -s ppr="0" -s wipe_hop_amount="1" -s material_flow="100" -s support_connect_zigzags="True" -s cool_fan_enabled="True" -s platform_adhesion="0" -s arcwelder_allow_3d_arcs="False" -s meshfix_fluid_motion_shift_distance="0.1" -s jerk_travel_layer_0="30.0" -s retraction_hop="1" -s infill_before_walls="True" -s machine_settings="0" -s machine_steps_per_mm_x="50" -s magic_fuzzy_skin_point_dist="0.8" -s _plugincuraenginegradualflow0_1_0layer_0_max_flow_acceleration="1" -s machine_endstop_positive_direction_x="False" -s support_conical_min_width="5.0" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s wall_line_width="0.4" -s wipe_repeat_count="5" -s top_bottom_pattern="lines" -s raft_remove_inside_corners="False" -s arcwelder_tolerance="5" -s machine_depth="200" -s raft_jerk="20" -s raft_speed="30.0" -s machine_end_gcode="M140 S0 2024-04-07 06:46:25,620 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M107 2024-04-07 06:46:25,620 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M104 S0 ;extruder heater off 2024-04-07 06:46:25,621 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G91 ;relative positioning 2024-04-07 06:46:25,621 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 E-0.5 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure 2024-04-07 06:46:25,621 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 Z+0.5 ;move z up a bit 2024-04-07 06:46:25,622 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 E-0.5 X-20 Y-20 F300 ;retract filament even more 2024-04-07 06:46:25,622 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G90 ;absolute positioning 2024-04-07 06:46:25,623 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 F2500 2024-04-07 06:46:25,624 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] G1 X0 Y200 ;move print bed all forward, so print is ready to be removed 2024-04-07 06:46:25,624 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M84 ;steppers off 2024-04-07 06:46:25,625 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] M82 ;absolute extrusion mode" -s experimental="0" -s bridge_settings_enabled="True" -s arcwelder_mm_per_arc_segment="1.0" -s arcwelder_max_gcode_length="0" -s clean_between_layers="False" -s roofing_layer_count="0" -s machine_buildplate_type="glass" -s brim_inside_margin="1.6" -s machine_max_feedrate_e="299792458000" -s conical_overhang_angle="50" -s infill_offset_x="0" -s acceleration_layer_0="3000" -s infill_wall_line_count="0" -s support_bottom_pattern="concentric" -s acceleration_wall_0="3000" -s extruders_enabled_count="1" -s support_tree_rest_preference="buildplate" -s coasting_volume="0.064" -s min_odd_wall_line_width="0.34" -s raft_interface_jerk="20" -s acceleration_enabled="False" -s support_interface_material_flow="100" -s raft_interface_layers="1" -s _plugincuraenginegradualflow0_1_0__gradual_flow_discretisation_step_size="0.2" -s gradual_infill_step_height="1.5" -s ooze_shield_angle="60" -s support_bottom_line_width="0.44" -s support_infill_rate="15.0" -s jerk_skirt_brim="20" -s raft_interface_extruder_nr="0" -s raft_surface_thickness="0.16" -s wall_transition_angle="10" -s wall_line_width_0="0.4" -s material_id="empty_material" -s material_print_temp_prepend="False" -s alternate_carve_order="True" -s magic_fuzzy_skin_thickness="0.3" -s support_tree_top_rate="10" -s cool_fan_speed_max="100.0" -s fill_outline_gaps="True" -s support_brim_line_count="3" -s jerk_print_layer_0="20" -s interlocking_beam_layer_count="2" -s support_type="buildplate" -s wall_material_flow="100" -s layer_start_y="0.0" -s gradual_support_infill_steps="0" -s interlocking_beam_width="0.8" -s material_initial_print_temperature="200" -s jerk_wall_0_roofing="20" -s jerk_enabled="False" -s acceleration_support_roof="3000" -s material_flush_purge_speed="0.5" -s machine_heated_build_volume="False" -s adaptive_layer_height_variation="0.1" -s jerk_wall_x_roofing="20" -s prime_tower_raft_base_line_spacing="1.6" -s jerk_support="20" -s wipe_retraction_prime_speed="25" -s support_extruder_nr_layer_0="0" -s support_tree_bp_diameter="7.5" -s bridge_fan_speed_3="0" -s cool_min_temperature="210" -s min_skin_width_for_expansion="4.898587196589413e-17" -s z_seam_type="sharpest_corner" -s machine_minimum_feedrate="0.0" -s material_guid="" -s z_seam_corner="z_seam_corner_inner" -s wall_transition_filter_distance="100" -s top_skin_preshrink="0.8" -s travel_avoid_other_parts="True" -s machine_extruders_share_heater="False" -s top_layers="5" -s support_bottom_material_flow="100" -s cool_fan_speed_min="100.0" -s brim_smart_ordering="True" -s shell="0" -s support_tower_roof_angle="65" -s machine_extruder_count="1" -s skin_overlap="5" -s travel_retract_before_outer_wall="False" -s raft_interface_thickness="0.24" -s meshfix_extensive_stitching="False" -s material_standby_temperature="150" -s date="07-04-2024" -s initial_extruder_nr="0" -s nozzle_offsetting_for_disallowed_areas="True" -e0 -s prime_tower_wipe_enabled="True" -s speed_wall_x="20" -s support_offset="0.8400000000000001" -s bridge_sparse_infill_max_density="0" -s wall_0_material_flow_roofing="100" -s support_roof_pattern="concentric" -s support_interface_height="1" -s brim_gap="0" -s zig_zaggify_infill="True" -s support_roof_angles="[ ]" -s speed="0" -s prime_blob_enable="False" -s support_roof_density="100" -s cool_min_layer_time_fan_speed_max="10" -s bridge_skin_support_threshold="70" -s support_roof_wall_count="0" -s support_brim_width="1.98" -s material_crystallinity="False" -s support_bottom_stair_step_width="5.0" -s support_xy_distance="0.5" -s material_brand="Amazon" -s extruder_prime_pos_x="0" -s support_interface_density="100" -s wipe_retraction_amount="1" -s cool_fan_full_layer="4" -s material_print_temperature_layer_0="230" -s prime_tower_max_bridging_distance="5" -s support_tower_maximum_supported_diameter="3.0" -s wall_overhang_angle="90" -s machine_endstop_positive_direction_y="False" -s skin_material_flow_layer_0="105" -s wipe_hop_enable="False" -s cross_infill_density_image="" -s switch_extruder_extra_prime_amount="0" -s jerk_print="20" -s min_even_wall_line_width="0.34" -s magic_fuzzy_skin_enabled="False" -s _plugincuraenginegradualflow0_1_0reset_flow_duration="2.0" -s material_flush_purge_length="60" -s speed_support_interface="10.0" -s brim_width="8.0" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s resolution="0" -s cool_min_speed="10" -s print_temp_warn_limit="3.0" -s acceleration_skirt_brim="3000" -s support_fan_enable="False" -s material_break_preparation_temperature="225.0" -s mold_enabled="False" -s support_roof_offset="0.0" -s small_skin_on_surface="False" -s support_line_distance="2.933333333333333" -s min_bead_width="0.34" -s meshfix_union_all="True" -s raft_interface_line_spacing="1.08" -s material_anti_ooze_retraction_speed="5" -s acceleration_wall="3000" -s connect_infill_polygons="False" -s top_bottom="0" -s jerk_support_roof="20" -s acceleration_infill="3000" -s bridge_wall_speed="10" -s retraction_amount="1" -s support_join_distance="2.0" -s support_zag_skip_count="7" -s support_skip_some_zags="False" -s brim_location="outside" -s coasting_enable="False" -s support_tree_tip_diameter="0.88" -s support_infill_angles="[ ]" -s inset_direction="inside_out" -s ironing_pattern="zigzag" -s speed_wall_0="20" -s brim_line_count="13" -s support_interface_offset="0.0" -s z_seam_position="back" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="2.933333333333333" -s material_break_preparation_speed="2" -s speed_support_bottom="10.0" -s raft_base_line_spacing="1.6" -s support_roof_enable="False" -s support_roof_line_width="0.44" -s support_bottom_density="100" -s speed_support_infill="15" -s mesh_position_z="0" -s prime_tower_flow="100" -s speed_infill="15" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s cross_support_density_image="" -s support_tree_min_height_to_model="3" -s retraction_hop_enabled="False" -s bridge_fan_speed="100" -s retraction_speed="30" -s travel_avoid_supports="True" -s roofing_material_flow="100" -s magic_fuzzy_skin_outside_only="True" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s cool_fan_speed_0="0" -s speed_print_layer_0="10" -s raft_jerk="20" -s skin_edge_support_thickness="0" -s support_pattern="zigzag" -s material_flow_layer_0="105" -s raft_surface_fan_speed="0" -s wall_line_width_x="0.44" -s _plugincuraenginegradualflow0_1_0gradual_flow_enabled="False" -s bridge_wall_coast="100" -s alternate_extra_perimeter="True" -s machine_extruder_cooling_fan_number="0" -s retraction_extra_prime_amount="0.08" -s magic_mesh_surface_mode="normal" -s retraction_enable="True" -s layer_start_x="0.0" -s speed_wall_0_roofing="20" -s skin_overlap_mm="0.022000000000000002" -s bottom_skin_expand_distance="0.44" -s dual="0" -s minimum_roof_area="1.0" -s extruder_prime_pos_abs="False" -s machine_min_cool_heat_time_window="50.0" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s jerk_print_layer_0="20" -s skirt_height="3" -s wall_x_material_flow_roofing="100" -s machine_feeder_wheel_diameter="10.0" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s jerk_wall_0="20" -s material_is_support_material="False" -s speed_equalize_flow_width_factor="100.0" -s top_bottom_thickness="1.2" -s lightning_infill_overhang_angle="40" -s acceleration_print_layer_0="3000" -s infill_sparse_density="10" -s infill_overlap="10" -s support_angle="60" -s support="0" -s skin_preshrink="0.44" -s raft_acceleration="3000" -s lightning_infill_prune_angle="40" -s support_bottom_height="1" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="105" -s support_tree_angle_slow="40.0" -s conical_overhang_enabled="False" -s skirt_line_count="3" -s raft_airgap="0.3" -s raft_base_line_width="0.8" -s acceleration_topbottom="3000" -s small_feature_speed_factor_0="50" -s group_outer_walls="True" -s raft_interface_line_width="0.88" -s acceleration_travel="5000" -s wall_transition_length="0.44" -s support_supported_skin_fan_speed="100" -s infill_sparse_thickness="0.16" -s expand_skins_expand_distance="0.44" -s support_tree_angle="60" -s optimize_wall_printing_order="True" -s small_skin_width="0.88" -s _plugincuraenginegradualflow0_1_0__max_flow_acceleration="1" -s jerk_wall_x="20" -s skin_angles="[ ]" -s raft_interface_margin="15" -s speed_prime_tower="15" -s jerk_roofing="20" -s support_infill_sparse_thickness="0.16" -s switch_extruder_retraction_speed="20" -s raft_surface_jerk="20" -s speed_print="15" -s material_break_speed="25" -s machine_nozzle_temp_enabled="True" -s wipe_retraction_retract_speed="30" -s raft_surface_speed="7.5" -s retraction_prime_speed="15.0" -s extruder_prime_pos_z="0" -s support_interface_pattern="concentric" -s speed_wall="7.5" -s xy_offset_layer_0="0" -s skin_material_flow="100" -s machine_steps_per_mm_e="1600" -s sub_div_rad_add="0.44" -s support_brim_enable="True" -s command_line_settings="0" -s raft_base_thickness="0.36" -s machine_heat_zone_length="16" -s support_bottom_enable="False" -s roofing_line_width="0.44" -s infill_support_angle="40" -s multiple_mesh_overlap="0.15" -s skin_edge_support_layers="0" -s wipe_pause="0" -s skin_no_small_gaps_heuristic="False" -s speed_z_hop="10" -s small_feature_speed_factor="50" -s infill_overlap_mm="0.044000000000000004" -s support_top_distance="0.1" -s cool_fan_speed="0" -s machine_extruder_end_pos_x="0" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s retraction_hop_after_extruder_switch="True" -s raft_base_acceleration="3000" -s raft_surface_line_spacing="0.44" -s support_bottom_angles="[ ]" -s flow_anomaly_limit="25.0" -s bottom_thickness="1.2" -s material_break_preparation_retracted_position="-16" -s wall_0_wipe_dist="0" -s support_conical_enabled="False" -s material_no_load_move_factor="0.940860215" -s small_feature_max_length="0.0" -s material_adhesion_tendency="10" -s print_temp_anomaly_limit="7.0" -s zig_zaggify_support="False" -s mesh_position_x="0" -s machine_nozzle_offset_x="0" -s skirt_brim_minimal_length="250" -s wall_0_inset="0" -s gradual_support_infill_step_height="1" -s support_bottom_stair_step_min_slope="10.0" -s raft_base_speed="5.625" -s skin_monotonic="True" -s bridge_skin_material_flow_3="110" -s acceleration_support_bottom="3000" -s acceleration_print="3000" -s machine_extruder_end_code_duration="0" -s retraction_hop_after_extruder_switch_height="0.5" -s bridge_skin_speed_2="10" -s acceleration_support="3000" -s wipe_retraction_speed="30" -s bridge_skin_density_2="75" -s support_tree_max_diameter="25" -s lightning_infill_straightening_angle="40" -s z_seam_y="200" -s support_tree_branch_diameter="5" -s top_bottom_pattern="lines" -s material_break_retracted_position="-50" -s extruder_nr="0" -s machine_extruder_end_pos_y="0" -s speed_roofing="20" -s raft_interface_acceleration="3000" -s small_hole_max_size="0" -s acceleration_wall_x_roofing="3000" -s speed_travel_layer_0="35.0" -s acceleration_wall_0_roofing="3000" -s support_bottom_offset="0.0" -s infill_angles="[ ]" -s support_tree_branch_diameter_angle="7" -s min_infill_area="0" -s flow_warn_limit="15.0" -s mold_width="5" -s bridge_skin_speed_3="10" -s material_final_print_temperature="225.0" -s roofing_angles="[ ]" -s cross_infill_pocket_size="4.4" -s support_use_towers="True" -s ironing_flow="10.0" -s infill_enable_travel_optimization="True" -s support_roof_material_flow="100" -s infill_wipe_dist="0.11" -s min_wall_line_width="0.34" -s support_interface_enable="True" -s acceleration_prime_tower="3000" -s infill_multiplier="1" -s raft_interface_speed="5.625" -s material_diameter="1.75" -s min_feature_size="0.11" -s machine_nozzle_cool_down_speed="2.0" -s initial_bottom_layers="4" -s coasting_speed="90" -s wall_0_material_flow="100" -s skirt_brim_speed="20" -s jerk_support_infill="20" -s support_conical_angle="30" -s switch_extruder_retraction_speeds="20" -s wipe_retraction_extra_prime_amount="0.08" -s top_skin_expand_distance="0.44" -s acceleration_support_interface="3000" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s meshfix_maximum_travel_resolution="0.88" -s material_surface_energy="100" -s wall_transition_filter_distance="100" -s meshfix_maximum_deviation="0.025" -s hole_xy_offset_max_diameter="0" -s support_tower_diameter="3.0" -s material_extrusion_cool_down_speed="0.7" -s bottom_layers="4" -s ironing_only_highest_layer="False" -s support_line_width="0.44" -s speed_topbottom="20" -s ironing_inset="0.41800000000000004" -s z_seam_x="100.0" -s skirt_gap="3" -s machine_steps_per_mm_y="50" -s slicing_tolerance="inclusive" -s bridge_skin_density="100" -s wall_overhang_speed_factor="100" -s travel_avoid_distance="0.625" -s support_tree_rest_preference="buildplate" -s acceleration_ironing="3000" -s jerk_travel="30" -s conical_overhang_hole_size="0" -s infill_line_distance="4.4" -s minimum_support_area="0.0" -s raft_base_jerk="20" -s machine_nozzle_size="0.4" -s wall_x_material_flow_layer_0="105" -s infill_randomize_start_location="False" -s machine_extruder_end_code="" -s lightning_infill_support_angle="40" -s machine_extruder_start_pos_abs="False" -s raft_surface_thickness="0.16" -s jerk_support_bottom="20" -s jerk_support_interface="20" -s acceleration_roofing="3000" -s top_bottom_pattern_0="lines" -s xy_offset="0" -s hole_xy_offset="0" -s infill="0" -s support_z_distance="0.1" -s minimum_bottom_area="1.0" -s raft_surface_layers="2" -s raft_surface_margin="15" -s cooling="0" -s top_thickness="1.2" -s speed_layer_0="20" -s acceleration_wall_x="3000" -s line_width="0.44" -s speed_support="15" -s raft_surface_acceleration="3000" -s raft_interface_thickness="0.24" -s machine_extruders_shared_nozzle_initial_retraction="0" -s default_material_print_temperature="255" -s meshfix_union_all_remove_holes="False" -s jerk_wall="20" -s ironing_line_spacing="0.1" -s wall_thickness="1.2" -s bridge_skin_speed="10" -s machine_extruder_start_code="" -s acceleration_support_infill="3000" -s support_xy_distance_overhang="0.2" -s retract_at_layer_change="False" -s travel="0" -s support_bottom_wall_count="0" -s switch_extruder_prime_speed="20" -s meshfix_fluid_motion_angle="15" -s support_tree_top_rate="10" -s machine_steps_per_mm_z="50" -s meshfix_fluid_motion_enabled="True" -s bottom_skin_preshrink="0.44" -s jerk_infill="20" -s travel_avoid_other_parts="False" -s machine_extruder_start_pos_x="0" -s skin_line_width="0.44" -s raft_base_fan_speed="0" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s infill_offset_x="0" -s roofing_pattern="lines" -s max_extrusion_before_wipe="10" -s support_roof_height="1" -s wipe_retraction_enable="True" -s machine_nozzle_heat_up_speed="2.0" -s material="0" -s cool_lift_head="False" -s jerk_layer_0="20" -s meshfix_maximum_extrusion_area_deviation="50000" -s material_anti_ooze_retracted_position="-4" -s jerk_topbottom="20" -s machine_extruder_start_pos_y="0" -s wipe_brush_pos_x="100" -s material_type="PETG" -s acceleration_travel_layer_0="5000.0" -s coasting_min_volume="0.8" -s speed_support_roof="10.0" -s speed_wall_x_roofing="20" -s raft_base_margin="15" -s machine_extruder_end_pos_abs="False" -s max_skin_angle_for_expansion="90" -s support_xy_overrides_z="z_overrides_xy" -s raft_surface_line_width="0.44" -s mold_roof_height="0.5" -s material_end_of_filament_purge_length="20" -s retraction_hop_only_when_collides="False" -s wipe_retraction_prime_speed="30" -s support_tree_limit_branch_reach="True" -s prime_tower_line_width="0.44" -s roofing_monotonic="True" -s meshfix_fluid_motion_small_distance="0.01" -s retraction_extrusion_window="1" -s wall_line_count="1" -s support_roof_line_distance="0.44" -s meshfix="0" -s gradual_infill_steps="0" -s support_interface_line_width="0.44" -s material_break_temperature="50" -s support_wall_count="0" -s wall_transition_filter_deviation="0.1" -s cool_min_layer_time="5" -s raft_margin="15" -s center_object="False" -s machine_extruder_start_code_duration="0" -s speed_travel="35.0" -s extruder_prime_pos_y="0" -s support_skip_zag_per_mm="20" -s infill_pattern="gyroid" -s material_maximum_park_duration="300" -s support_interface_wall_count="0" -s z_seam_relative="False" -s skin_outline_count="0" -s retraction_count_max="90" -s retraction_combing_max_distance="0" -s meshfix_keep_open_polygons="False" -s raft_fan_speed="0" -s support_bottom_line_distance="0.44" -s ironing_enabled="False" -s ironing_monotonic="False" -s speed_ironing="13.333333333333334" -s jerk_prime_tower="20" -s minimum_interface_area="1.0" -s brim_replaces_support="True" -s infill_offset_y="0" -s raft_surface_monotonic="True" -s jerk_wall_0_roofing="20" -s retraction_retract_speed="20" -s jerk_ironing="20" -s material_print_temperature="225.0" -s material_end_of_filament_purge_speed="0.5" -s skirt_brim_line_width="0.44" -s retraction_min_travel="0.88" -s infill_line_width="0.44" -s support_material_flow="100" -s mold_angle="40" -s support_bottom_stair_step_height="0.3" -s wall_x_material_flow="100" -s switch_extruder_retraction_amount="16" -s blackmagic="0" -s cool_fan_full_at_height="0.2" -s meshfix_maximum_resolution="0.5" -s machine_nozzle_id="unknown" -s wipe_hop_speed="10" -s machine_endstop_positive_direction_z="True" -s wall_distribution_count="1" -s skirt_brim_material_flow="100" -s ppr="0" -s bridge_enable_more_layers="True" -s wipe_hop_amount="0.5" -s material_flow="100" -s support_connect_zigzags="True" -s meshfix_fluid_motion_shift_distance="0.1" -s jerk_travel_layer_0="30.0" -s retraction_hop="0.5" -s infill_before_walls="False" -s machine_settings="0" -s machine_steps_per_mm_x="50" -s magic_fuzzy_skin_point_dist="0.8" -s _plugincuraenginegradualflow0_1_0layer_0_max_flow_acceleration="1" -s machine_endstop_positive_direction_x="False" -s bridge_skin_density_3="80" -s platform_adhesion="0" -s cool_fan_enabled="True" -s support_conical_min_width="5.0" -s machine_nozzle_tip_outer_diameter="1" -s machine_nozzle_offset_y="0" -s wall_line_width="0.44" -s wipe_repeat_count="5" -s support_interface_angles="[ ]" -s raft_speed="7.5" -s experimental="0" -s clean_between_layers="False" -s support_bottom_pattern="concentric" -s roofing_layer_count="1" -s brim_inside_margin="1.76" -s conical_overhang_angle="50" -s acceleration_layer_0="3000" -s infill_wall_line_count="0" -s acceleration_wall_0="3000" -s raft_interface_jerk="20" -s bridge_wall_material_flow="50" -s support_interface_material_flow="100" -s raft_interface_layers="1" -s gradual_infill_step_height="1.5" -s _plugincuraenginegradualflow0_1_0gradual_flow_discretisation_step_size="0.2" -s support_bottom_line_width="0.44" -s support_infill_rate="15.0" -s jerk_skirt_brim="20" -s wall_transition_angle="10" -s acceleration_support_roof="3000" -s wall_line_width_0="0.44" -s magic_fuzzy_skin_thickness="0.3" -s cool_fan_speed_max="0" -s fill_outline_gaps="True" -s support_brim_line_count="3" -s wall_material_flow="100" -s layer_start_y="0.0" -s interlocking_beam_width="0.88" -s mesh_position_y="0" -s material_initial_print_temperature="225.0" -s material_flush_purge_speed="0.5" -s jerk_wall_x_roofing="20" -s prime_tower_raft_base_line_spacing="1.6" -s jerk_support="20" -s support_tree_bp_diameter="7.5" -s min_skin_width_for_expansion="5.878304635907295e-17" -s bridge_fan_speed_3="0" -s cool_min_temperature="225.0" -s z_seam_type="shortest" -s material_guid="69386c85-5b6c-421a-bec5-aeb1fb33f060" -s z_seam_corner="z_seam_corner_inner" -s bridge_skin_material_flow="60" -s top_skin_preshrink="0.44" -s initial_layer_line_width_factor="150" -s top_layers="6" -s support_bottom_material_flow="100" -s cool_fan_speed_min="0" -s brim_smart_ordering="True" -s infill_support_enabled="False" -s shell="0" -s support_tower_roof_angle="65" -s skin_overlap="5" -s gradual_support_infill_steps="0" -s meshfix_extensive_stitching="False" -s material_standby_temperature="160.0" -g -e0 -l "0" -s extruder_nr="0" 2024-04-07 06:46:25,626 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-04-07 06:46:25,626 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.625] [info] Progress: start accomplished in 0.000s 2024-04-07 06:46:25,627 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.625] [info] Starting slice... 2024-04-07 06:46:25,628 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.625] [info] Slicing model... 2024-04-07 06:46:25,634 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.634] [info] Slice of mesh took 0.009 seconds 2024-04-07 06:46:25,672 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.673] [info] Make polygons took 0.039 seconds 2024-04-07 06:46:25,673 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.673] [info] Progress: slice accomplished in 0.049s 2024-04-07 06:46:25,674 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.673] [info] Starting layerparts... 2024-04-07 06:46:25,687 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.687] [info] Progress: layerparts accomplished in 0.014s 2024-04-07 06:46:25,688 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:25.687] [info] Starting inset+skin... 2024-04-07 06:46:26,378 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.378] [info] Progress: inset+skin accomplished in 0.691s 2024-04-07 06:46:26,379 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.378] [info] Starting support... 2024-04-07 06:46:26,421 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.422] [info] Progress: support accomplished in 0.044s 2024-04-07 06:46:26,422 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.422] [info] Starting export... 2024-04-07 06:46:26,545 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.545] [info] ┌ Layer export [0] accomplished in 0.121s 2024-04-07 06:46:26,546 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.545] [info] └── Mesh 0: 0.114s 2024-04-07 06:46:26,551 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.551] [info] ┌ Layer export [1] accomplished in 0.127s 2024-04-07 06:46:26,552 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.551] [info] └── Mesh 0: 0.123s 2024-04-07 06:46:26,552 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.552] [info] Skipped time reporting for layers [2...3] 2024-04-07 06:46:26,553 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.552] [info] ┌ Layer export [3] accomplished in 0.121s 2024-04-07 06:46:26,554 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.552] [info] └── Mesh 0: 0.118s 2024-04-07 06:46:26,662 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.662] [info] Skipped time reporting for layers [4...28] 2024-04-07 06:46:26,663 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.662] [info] ┌ Layer export [28] accomplished in 0.112s 2024-04-07 06:46:26,663 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.662] [info] └── Mesh 0: 0.107s 2024-04-07 06:46:26,681 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.680] [info] ┌ Layer export [29] accomplished in 0.124s 2024-04-07 06:46:26,682 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.680] [info] └── Mesh 0: 0.121s 2024-04-07 06:46:26,727 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.727] [info] ┌ Layer export [30] accomplished in 0.164s 2024-04-07 06:46:26,728 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.727] [info] └── Mesh 0: 0.160s 2024-04-07 06:46:26,856 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.856] [info] Skipped time reporting for layers [31...32] 2024-04-07 06:46:26,857 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.856] [info] ┌ Layer export [32] accomplished in 0.278s 2024-04-07 06:46:26,857 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.856] [info] └── Mesh 0: 0.274s 2024-04-07 06:46:26,859 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.860] [info] ┌ Layer export [33] accomplished in 0.129s 2024-04-07 06:46:26,860 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.860] [info] └── Mesh 0: 0.125s 2024-04-07 06:46:26,862 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.863] [info] ┌ Layer export [34] accomplished in 0.159s 2024-04-07 06:46:26,863 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.863] [info] └── Mesh 0: 0.153s 2024-04-07 06:46:26,866 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.867] [info] ┌ Layer export [35] accomplished in 0.186s 2024-04-07 06:46:26,867 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.867] [info] └── Mesh 0: 0.180s 2024-04-07 06:46:26,869 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.870] [info] ┌ Layer export [36] accomplished in 0.231s 2024-04-07 06:46:26,870 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.870] [info] ├── Init: 0.013s 2024-04-07 06:46:26,871 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.870] [info] └── Mesh 0: 0.218s 2024-04-07 06:46:26,873 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.874] [info] ┌ Layer export [37] accomplished in 0.101s 2024-04-07 06:46:26,874 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.874] [info] └── Mesh 0: 0.098s 2024-04-07 06:46:26,886 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.886] [info] Skipped time reporting for layers [38...40] 2024-04-07 06:46:26,886 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.886] [info] ┌ Layer export [40] accomplished in 0.169s 2024-04-07 06:46:26,887 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.886] [info] └── Mesh 0: 0.163s 2024-04-07 06:46:26,894 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.894] [info] Skipped time reporting for layers [41...42] 2024-04-07 06:46:26,895 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.894] [info] ┌ Layer export [42] accomplished in 0.143s 2024-04-07 06:46:26,895 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.894] [info] └── Mesh 0: 0.139s 2024-04-07 06:46:26,918 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.918] [info] ┌ Layer export [43] accomplished in 0.201s 2024-04-07 06:46:26,919 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.918] [info] └── Mesh 0: 0.196s 2024-04-07 06:46:26,921 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.921] [info] ┌ Layer export [44] accomplished in 0.151s 2024-04-07 06:46:26,922 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.921] [info] └── Mesh 0: 0.147s 2024-04-07 06:46:26,931 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.931] [info] ┌ Layer export [45] accomplished in 0.115s 2024-04-07 06:46:26,931 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.931] [info] └── Mesh 0: 0.110s 2024-04-07 06:46:26,938 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.938] [info] ┌ Layer export [46] accomplished in 0.161s 2024-04-07 06:46:26,939 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.938] [info] └── Mesh 0: 0.157s 2024-04-07 06:46:26,951 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.952] [info] Skipped time reporting for layers [47...48] 2024-04-07 06:46:26,952 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.952] [info] ┌ Layer export [48] accomplished in 0.134s 2024-04-07 06:46:26,953 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.953] [info] └── Mesh 0: 0.130s 2024-04-07 06:46:26,968 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.968] [info] Skipped time reporting for layers [49...50] 2024-04-07 06:46:26,969 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.968] [info] ┌ Layer export [50] accomplished in 0.146s 2024-04-07 06:46:26,971 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.968] [info] ├── Init: 0.014s 2024-04-07 06:46:26,971 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:26.968] [info] └── Mesh 0: 0.131s 2024-04-07 06:46:27,049 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:27.049] [info] Skipped time reporting for layers [51...68] 2024-04-07 06:46:27,050 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:27.049] [info] ┌ Layer export [68] accomplished in 0.102s 2024-04-07 06:46:27,050 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:27.049] [info] └── Mesh 0: 0.100s 2024-04-07 06:46:27,057 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:27.057] [error] The file %s could not be opened for writing. 2024-04-07 06:46:28,474 - ERROR - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [1038]: Backend exited abnormally with return code 3221226505! 2024-04-07 06:46:28,483 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [421]: Attempting to kill the engine process 2024-04-07 06:46:28,484 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [427]: Killing engine process 2024-04-07 06:46:28,484 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [430]: Engine process is killed. Received return code 3221226505 2024-04-07 06:46:28,485 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first. 2024-04-07 06:46:28,503 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening 2024-04-07 06:46:28,506 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: C:\Program Files\UltiMaker Cura 5.7.0\CuraEngine.exe 2024-04-07 06:46:28,507 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['C:\Program Files\UltiMaker Cura 5.7.0\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2024-04-07 06:46:28,539 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:28.539] [info] Sentry url: https://734f9ec9024f73e53701d59c3ffddfe3@o323038.ingest.sentry.io/4506257745510401 2024-04-07 06:46:28,540 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:28.539] [info] Sentry config path: C:/Users/*/AppData/Roaming/cura/.sentry-native 2024-04-07 06:46:28,540 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:28.539] [info] Starting sentry 2024-04-07 06:46:28,550 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:28.550] [info] Connecting to 127.0.0.1:49674 2024-04-07 06:46:28,551 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected 2024-04-07 06:46:28,552 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674 2024-04-07 06:46:28,658 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 06:46:28.658] [info] Connected to 127.0.0.1:49674
This was Cura 5.7.0, and is completely repeatable by "reset all model positions" and slicing with the options provided in the project and above. Why it then slices when moved just a little bit I couldn't tell you.
@HellAholic This is the first time I've this return code: 3221226505
@moviebrain Try removing/disabling plugins and attempt to slice again. I can slice in the middle of the build plate on my personal device. It has no plugins and no custom settings/profiles. Just opened your project file and pressed slice. Also tried with reset all model positions, no slice fail.
Let me know if that solves the issue.
I went into marketplace and found 3 non-bundled extensions (arc welder and mesh tools, both unused for this slice, and octoprint connection manager). I disabled all three and restarted cura, the slice still fails with exit code 3221226505 still.
Thanks for checking, I'll have to run it on another device to see if the crash is reproducible there. Outside of that I'll see if the sentry shows more detail for the slice fail.
I just went back in to test something, if opening the cura project on my own machine changed the workflow somehow and allowed the slice to proceed.
It did not. It still fails for me unless I move the model a bit.
It’s frustrating because this isn’t a huge issue at the end of the day, but also it hasn’t always been a problem, this has worked without jiggling stuff in the not so distant past.
I attempted again today to bang at this and get some kind of different log entry that might provide clues. I restarted the PC i'm slicing on, and a fresh open of the project failed, as did moving it around on the plate. Only a move and a rotation allowed it to slice.
If I open Cura 5.7.0 as administrator, no errors occur:
... 2024-04-07 22:53:02,714 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.714] [info] Skipped time reporting for layers [47...48] 2024-04-07 22:53:02,715 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.714] [info] ┌ Layer export [48] accomplished in 0.120s 2024-04-07 22:53:02,715 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.714] [info] └── Mesh 0: 0.116s 2024-04-07 22:53:02,719 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.719] [info] ┌ Layer export [49] accomplished in 0.108s 2024-04-07 22:53:02,719 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.719] [info] └── Mesh 0: 0.105s 2024-04-07 22:53:02,811 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.811] [error] Clipper::offset failed. See generated debug.html! Black is original Blue is offsetted polygon 2024-04-07 22:53:02,874 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.873] [info] Skipped time reporting for layers [50...72] 2024-04-07 22:53:02,874 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.873] [info] ┌ Layer export [72] accomplished in 0.150s 2024-04-07 22:53:02,874 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.873] [info] └── Mesh 0: 0.148s 2024-04-07 22:53:02,906 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.906] [info] Progress: export accomplished in 0.671s 2024-04-07 22:53:02,906 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.906] [info] Sending 81 layers. 2024-04-07 22:53:02,906 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.906] [info] Total time elapsed 1.383s 2024-04-07 22:53:02,907 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-04-07 22:53:02,910 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.911] [info] Print time (s): 10862 2024-04-07 22:53:02,910 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.911] [info] Print time (hr|min|s): 3h 1m 2s 2024-04-07 22:53:02,911 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:02.911] [info] Filament (mm^3): 12153 2024-04-07 22:53:03,172 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:03.172] [info] Closing sentry 2024-04-07 22:53:03,282 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:53:03.282] [info] Closing connection. 2024-04-07 22:53:03,315 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-04-07 22:53:03,316 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Cura_SteamEngine version 5.7.0 2024-04-07 22:53:03,317 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Copyright (C) 2024 Ultimaker 2024-04-07 22:53:03,317 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-04-07 22:53:03,318 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is free software: you can redistribute it and/or modify 2024-04-07 22:53:03,318 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] it under the terms of the GNU Affero General Public License as published by 2024-04-07 22:53:03,318 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] the Free Software Foundation, either version 3 of the License, or 2024-04-07 22:53:03,319 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] (at your option) any later version. 2024-04-07 22:53:03,319 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-04-07 22:53:03,320 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is distributed in the hope that it will be useful, 2024-04-07 22:53:03,320 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2024-04-07 22:53:03,321 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2024-04-07 22:53:03,321 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] GNU Affero General Public License for more details. 2024-04-07 22:53:03,321 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-04-07 22:53:03,322 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] You should have received a copy of the GNU Affero General Public License 2024-04-07 22:53:03,322 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/. 2024-04-07 22:53:03,342 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [842]: Slicing took 2.147254467010498 seconds 2024-04-07 22:53:03,342 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [843]: Number of models per buildplate: {0: 1} 2024-04-07 22:53:03,343 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [857]: See if there is more to slice... 2024-04-07 22:53:03,344 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [240]: Socket state changed to Closing 2024-04-07 22:53:03,344 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [264]: Socket debug: Arcus Error (13): Closing socket because other side requested close. 2024-04-07 22:53:03,344 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [242]: Socket state changed to Closed 2024-04-07 22:53:03,349 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [1043]: Backend finished slicing. Resetting process and socket.
If I close it and immediately open the same file without Admin rights it fails.
... 2024-04-07 22:54:52,345 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:52.344] [info] ┌ Layer export [48] accomplished in 0.118s 2024-04-07 22:54:52,345 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:52.344] [info] └── Mesh 0: 0.115s 2024-04-07 22:54:52,348 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:52.348] [info] ┌ Layer export [49] accomplished in 0.119s 2024-04-07 22:54:52,349 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:52.348] [info] └── Mesh 0: 0.115s 2024-04-07 22:54:52,432 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:52.432] [error] The file %s could not be opened for writing. 2024-04-07 22:54:53,130 - ERROR - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [1038]: Backend exited abnormally with return code 3221226505! 2024-04-07 22:54:53,140 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [421]: Attempting to kill the engine process 2024-04-07 22:54:53,141 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [427]: Killing engine process 2024-04-07 22:54:53,141 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [430]: Engine process is killed. Received return code 3221226505 2024-04-07 22:54:53,142 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first. 2024-04-07 22:54:53,156 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening 2024-04-07 22:54:53,159 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: C:\Program Files\UltiMaker Cura 5.7.0\CuraEngine.exe 2024-04-07 22:54:53,159 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['C:\Program Files\UltiMaker Cura 5.7.0\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2024-04-07 22:54:53,188 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:53.188] [info] Sentry url: https://734f9ec9024f73e53701d59c3ffddfe3@o323038.ingest.sentry.io/4506257745510401 2024-04-07 22:54:53,188 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:53.188] [info] Sentry config path: C:/Users/***/AppData/Roaming/cura/.sentry-native 2024-04-07 22:54:53,188 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:53.188] [info] Starting sentry 2024-04-07 22:54:53,197 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:53.197] [info] Connecting to 127.0.0.1:49674 2024-04-07 22:54:53,198 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected 2024-04-07 22:54:53,199 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674 2024-04-07 22:54:53,311 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:53.311] [info] Connected to 127.0.0.1:49674 2024-04-07 22:54:54,131 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.028922557830810547 seconds
I am the owner and admin of this computer, with the primary user having administrator privileges
It looks like somewhere there is a permissions issue, but I'll be darned why moving and turning the model makes a difference sometimes.
The final code being spit out before dumping with an exit code is always 2024-04-07 22:54:52,432 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-04-07 22:54:52.432] [error] The file %s could not be opened for writing.
@moviebrain Thanks for additional info and going into detail with the investigation. I've added a ticket for the team with your pointers/findings.
For internal reference of the Cura team CURA-11821
Cura Version
5.7.0
Operating System
windows 10
Printer
wanhao i3
Name abnormal settings
none, tpu profile .3 first layer, .16 all others.
Describe model location
center of build plate.
Describe your model
flexi rex, old save and newly downloaded. mesh fix tool found it watertight.
Add your .zip here ⬇️
WDI3_Flexi-Rex-improved.zip
only slices if moved from center of buildplate. I have had nothing but slicing errors over and over since updating to 5.6 and now 5.7, items have have always sliced error-free before.