search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.16k stars 2.07k forks source link

Slicing Failed #18898

Open Govardhan3d opened 6 months ago

Govardhan3d commented 6 months ago

Cura Version

5.7.0

Operating System

Windows 11

Printer

Ender 3v2

Name abnormal settings

default profiles

Describe model location

center of the buildplate

Describe your model

no

Add your .zip here ⬇️

CE3E3V2_Body1.zip Desktop Screenshot 2024 04 15 - 19 42 24 59

GregValiant commented 6 months ago

Thanks for the report. Try running Cura "As Administrator" and see if it makes a difference. The model is fine and it sliced for me. Let us know if "Run as Administrator" makes a difference. I'll mark this as a duplicate and the Cura team will take a look.

This is an 18 1/2 hour print with your settings. The model looks like it was designed to print without support. The infill at 7% and infill layer thickness at 0.4 would be plenty. That cuts it down to 11 hours and 33% less filament. Just sayin'.

Govardhan3d commented 6 months ago

nope is the same problem i have tried As Administrator also its not working one more thing is. the model slices when its in small but in bigger size getting failed Desktop Screenshot 2024 04 17 - 09 11 50 74

GregValiant commented 6 months ago

Use the "Help | Show Configuration Folder" command. Zip the "Cura.log" file and post the zip folder here. Maybe it will give a clue.

Govardhan3d commented 6 months ago

5.7.zip

cura.zip

GregValiant commented 6 months ago

Here is a code from the Cura Engine crash.
"Backend exited abnormally with return code 3221225477!" Maybe @HellAholic has some news on this.

HellAholic commented 6 months ago

I took a look at the project file across 3 different systems (windows 10 - Intel | windows 11 - Intel | windows 10 - AMD) it slices without issues on all of them so this makes it hard to track. image

We have the sentry report system in place so the crash report has been logged there. Unfortunately purely based on the error code it is not possible to pin-point the exact issue. I have a few guesses but one of them is already out (running in administrator) the other was the gradual flow (which is not enabled in your project file so that is ruled out) and lastly windows firewall rules or antivirus software rules/blocks.