Open jubeormk1 opened 4 months ago
Thanks for the report. The model has a couple of minor errors but it did slice for me on my Win10 system with both the Standard profile and with your "gambody tuned" profile. The Cura team will take a look.
In regards to the model itself, this is painted in MS 3D Builder. You can see some odd construction here. The blue surface appears to be mis-aligned and is 0.10 taller than the adjacent yellow surface. The red surfaces are steps in the model. Both of those oddities do show up in the print.
Cura Version
5.7.2
Operating System
Windows 11
Printer
Ultimaker 3
Name abnormal settings
Use Adaptive Layers, Tree support
Describe model location
Close to the front right. Repeating the slice did print.
Describe your model
Yes, It was ok. The model is here https://www.thingiverse.com/thing:6294920/files
Add your .zip here ⬇️
The next files contains the profile used when the slice failed ErrorSlicing.zip This is my project UM3_tmpr_xuz62xphone_stand_but_16mm_arms.zip
Before failing I changed from fast (standard) to the provided printing profile.
Good luck!