Open Andrew-F-in-Australia opened 2 months ago
furtber
commented
2 months ago Hi @Andrew-F-in-Australia - I could get appimage cura 5.8.1 running on F 40 with downgrading mesa like this:
dnf downgrade mesa-dri-drivers-24.0.5
I know that's not a solution, but at least you can use latest cura ...
trigpoint
commented
2 months ago Thank you. Have been having the same issue, this seems to have solved it for now although I assume it will break again when fedora updates.
I had made a VM with a non-updated Fedors 40 and it worked so had come to the conclusion that there is a bug in a Fedora update.
Do we know what Cura is no longer getting from mesa-dri-drivers so the bug can be reported to Fedora?
Do we know what Cura is checking at thi
phako
commented
2 months ago Work-around is to force Cura to run in XWayland with QT_QPA_PLATFORM=xcb ./ultimaker_cura.appimage
Cura Version
5.8.1
Operating System
Fedora 40 - KDE
Printer
---appimage fails to start -
Reproduction steps
May be a partial duplicate of #19303, unsure.
Attempted to open 5.8.0 appimage from commandline as well as through file manager (Dolphin.) This was working 3 weeks ago when I last ran the printers.
This time, crash occurs on load (see screenshot below)
Attempted the following:
blacklisted nouveau (which used to work well,) and installed the nvidia proprietary drivers and secure boot.
tried previous kernels through the grub menu
tried previous appimages also.
Each attempt was met with the same error. Could not probe OpenGL. This program requires OpenGL 2.0 or higher. Please check your video card drivers. and: ./UltiMaker-Cura-5.8.1-linux-X64.AppImage qt.qpa.wayland: EGL not available
attempted to run as root - now only opens in superuser/with elevated privileges, but will not allow signin. Also detects a cyclic dependency.
horace@fedora:/mnt/Data/3D Printer$ sudo ./UltiMaker-Cura-5.8.1-linux-X64.AppImage [sudo] password for horace: Sorry, try again. [sudo] password for horace: qt.accessibility.atspi: Error in contacting registry: "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not activate remote peer 'org.a11y.atspi.Registry': unit failed" qt.qml.typeresolution.cycle: Cyclic dependency detected between "file:///tmp/.mount_UltiMaU3bksc/share/cura/resources/qml/Actions.qml" and "file:///tmp/.mount_UltiMaU3bksc/share/cura/resources/qml/Actions.qml" Running Firefox as root in a regular user's session is not supported. ($XAUTHORITY is /run/user/1000/xauth_MZsJxd which is owned by horace.)Log file:Actual results
when executed either from command line or file manager, program hangs with a qt wayland/EGL issue as above. when executed from sudo, cura does opens but does not allow signin as a standard user without elevated privileges. 'horace@fedora:/mnt/Data/3D Printer$ sudo ./UltiMaker-Cura-5.8.1-linux-X64.AppImage [sudo] password for horace: qt.accessibility.atspi: Error in contacting registry: "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not activate remote peer 'org.a11y.atspi.Registry': unit failed" qt.qml.typeresolution.cycle: Cyclic dependency detected between "file:///tmp/.mount_UltiMaU3bksc/share/cura/resources/qml/Actions.qml" and "file:///tmp/.mount_UltiMaU3bksc/share/cura/resources/qml/Actions.qml" Running Firefox as root in a regular user's session is not supported. ($XAUTHORITY is /run/user/1000/xauth_MZsJxd which is owned by horace.) '
Expected results
appimage should run, but doesn't open.
Add your .zip and screenshots here ⬇️
horace@fedora:~/.local/share/cura/5.8$ mokutil --sb-state SecureBoot enabled horace@fedora:~/.local/share/cura/5.8$ sudo inxi -G Graphics: Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] driver: i915 v: kernel Device-2: NVIDIA TU106M [GeForce RTX 2060 Mobile] driver: nvidia v: 560.35.03 Device-3: Bison HD Webcam driver: uvcvideo type: USB Device-4: Logitech Webcam Pro 9000 driver: snd-usb-audio,uvcvideo type: USB Display: server: X.Org v: 24.1.2 with: Xwayland v: 24.1.2 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915,nvidia,nvidia-nvswitch resolution: 1: 1080x2560~60Hz 2: 2560x1080~60Hz 3: 1920x1080~144Hz API: EGL v: 1.5 drivers: iris,nvidia,swrast platforms: gbm,x11,surfaceless,device API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 24.1.7 renderer: Mesa Intel UHD Graphics 630 (CFL GT2) API: Vulkan v: 1.3.290 drivers: N/A surfaces: xcb,xlib horace@fedora:~/.local/share/cura/5.8$ dnf list installed '*nvidia*' Installed Packages akmod-nvidia.x86_64 3:560.35.03-1.fc40 @rpmfusion-nonfree-updates kmod-nvidia-6.10.7-200.fc40.x86_64.x86_64 3:560.35.03-1.fc40 @@commandline nvidia-gpu-firmware.noarch 20240811-2.fc40 @updates nvidia-modprobe.x86_64 3:560.35.03-1.fc40 @rpmfusion-nonfree-updates nvidia-persistenced.x86_64 3:560.35.03-1.fc40 @rpmfusion-nonfree-updates nvidia-settings.x86_64 3:560.35.03-1.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia.x86_64 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-cuda.x86_64 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-cuda-libs.i686 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-cuda-libs.x86_64 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-kmodsrc.x86_64 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-libs.i686 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-libs.x86_64 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates xorg-x11-drv-nvidia-power.x86_64 3:560.35.03-3.fc40 @rpmfusion-nonfree-updates horace@fedora:~/.local/share/cura/5.8$ uname -a Linux fedora 6.10.7-200.fc40.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Aug 30 00:08:59 UTC 2024 x86_64 GNU/LinuxScreenshot attached of this configuration which may be easier to read.