Open Emoxy1 opened 6 days ago
There were issues with Tree Supports that were already fixed in 5.7.0, which released nearly six months ago, as mentioned in the release notes. At the very least I would recommend updating to that version, if not all the way to the current 5.8.1 and trying again. Note that if you specifically need 5.6.0 for a given purpose or project that any different minor versions of Cura can coexist without interfering with each other (eg 5.6.0 and 5.8.1 won't interfere, but 5.8.0 and 5.8.1 may).
To that end I'm unable to reproduce your fault in 5.8.0, so I can only assume it was one of those that has long since already been fixed.
You also need to wait for your files to finish uploading before submitting the post. Note how the second link (the image) has "Uploading" before it and the ellipses afterwards - this indicates that the upload was still ongoing, and the link is of no use due to the interruption.
Cura Version
5.6.0
Operating System
windows 11 intel i7 13700h
Printer
elegoo neptune 4
Name abnormal settings
even with the default profiles i cant slice
Describe model location
i tried every possibility and it doesnt work
Describe your model
just an articulated fishbone i think the model doesnt change anything i cant slice 90% of my prints using tree support
Add your .zip here ⬇️
EN4_Fish_improved_print_in_place.zip ![Uploading resim_2024-09-23_195355836.png…]()