GregValiant
commented
3 days ago Thanks for the report. I've written a few post processors and I've never had Cura crash during a session just because I changed a setting. The script might not run (the reason is noted in my log file), but Cura doesn't crash. Cura will crash when loading the script if there is an error in the code for the script settings (a missing comma or something). When that happens a window pops up with a description of the error.
It might have something to do with the script. The last change to PauseAtHeight was one of my proposals. My re-write of "Insert At Layer Change" has been accepted and is included with Cura 5.9.0-betas1 and 2. Both changes were extensively tested by myself in Cura versions from 4.8 to the current versions, and with Creality Cura and SmartAvionics Cura. I haven't come across this problem. Any post processing script just sits and does nothing until you "Save" the file. Cura does note when changes are made to the settings of a post processor and if a setting is changed then Cura will ask for a re-slice.
If you could add any additional insight into what you do to make this happen and include your log file (not just a snippet) it might shed some light on this. Right now I can't reproduce it and I assume that when UltiMaker tested both scripts before accepting the changes, that it worked for them as well. When you say "Try to edit the script again and try to change the layer height during preview" do you mean altering the current settings of the script(?) or actually going into the script and altering the code?
Cura Version
5.X.X (multiples)
Operating System
Windows 11
Printer
Custom Ender3 Pro with Klipper
Reproduction steps
Actual results
Crash
Expected results
Not Chash
Add your .zip and screenshots here ⬇️
2024-11-11 23:45:31,849 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage 2024-11-11 23:45:31,887 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView 2024-11-11 23:45:31,890 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromVertices [567]: Calculating normals took 0.0 seconds 2024-11-11 23:45:31,891 - DEBUG - [MainThread] STLReader.STLReader._read [68]: Loaded a mesh with 12612 vertices 2024-11-11 23:45:31,893 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\plugins\SimulationView\simulationview_composite.shader]... 2024-11-11 23:45:31,915 - DEBUG - [JobQueueWorker [6]] CuraEngineBackend.ProcessSlicedLayersJob.run [74]: Processing new layer for build plate 0... 2024-11-11 23:45:32,189 - DEBUG - [JobQueueWorker [6]] CuraEngineBackend.ProcessSlicedLayersJob.run [254]: Processing layers took 0.27312183380126953 seconds 2024-11-11 23:45:32,218 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\uranium\resources\shaders\color.shader]... 2024-11-11 23:45:32,220 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\plugins\SimulationView\layers3d.shader]... 2024-11-11 23:45:32,224 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\plugins\SimulationView\layers3d_shadow.shader]... 2024-11-11 23:45:32,226 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\uranium\resources\shaders\toolhandle.shader]... 2024-11-11 23:45:32,228 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\uranium\resources\shaders\color.shader]... 2024-11-11 23:45:32,229 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\striped.shader]... 2024-11-11 23:45:32,306 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [1109]: See if there is more to slice(2)... 2024-11-11 23:45:32,795 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [339]: Creating thumbnail image (just before slice)... 2024-11-11 23:45:32,797 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [252]: Changing perspective mode to orthographic. 2024-11-11 23:45:32,799 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\overhang.shader]... 2024-11-11 23:45:32,801 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\transparent_object.shader]... 2024-11-11 23:45:32,802 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\striped.shader]... 2024-11-11 23:45:33,129 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [361]: Starting to slice... 2024-11-11 23:45:33,130 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [365]: Slice unnecessary, nothing has changed that needs reslicing. 2024-11-11 23:45:37,621 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled. 2024-11-11 23:45:37,622 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 0.00s 2024-11-11 23:45:38,122 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [339]: Creating thumbnail image (just before slice)... 2024-11-11 23:45:38,124 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [252]: Changing perspective mode to orthographic. 2024-11-11 23:45:38,125 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\overhang.shader]... 2024-11-11 23:45:38,127 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\transparent_object.shader]... 2024-11-11 23:45:38,129 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\striped.shader]... 2024-11-11 23:45:38,423 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [361]: Starting to slice... 2024-11-11 23:45:38,424 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [381]: Going to slice build plate [0]! 2024-11-11 23:45:38,425 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [297]: Previous socket existed. Closing that first. 2024-11-11 23:45:38,545 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening 2024-11-11 23:45:38,577 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: C:\Program Files\UltiMaker Cura 5.9.0-beta.2\CuraEngine.exe 2024-11-11 23:45:38,578 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['C:\Program Files\UltiMaker Cura 5.9.0-beta.2\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2024-11-11 23:45:38,586 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [606]: Sending slice message took 0.16152620315551758 seconds 2024-11-11 23:45:38,685 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.684] [info] Sentry url: https://734f9ec9024f73e53701d59c3ffddfe3@o323038.ingest.sentry.io/4506257745510401 2024-11-11 23:45:38,685 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.685] [info] Sentry config path: C:/Users/***/AppData/Roaming/cura/.sentry-native 2024-11-11 23:45:38,686 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.685] [info] Starting sentry 2024-11-11 23:45:38,699 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.700] [info] Connecting to 127.0.0.1:49674 2024-11-11 23:45:38,703 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected 2024-11-11 23:45:38,703 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674 2024-11-11 23:45:38,806 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.806] [info] Connected to 127.0.0.1:49674 2024-11-11 23:45:38,813 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.812] [info] All settings: -s infill_multiplier="1" -s acceleration_prime_tower="500" -s raft_interface_extruder_nr="0" -s raft_interface_wall_count="0" -s quality_changes_name="0.2 200mm/s PLA" -s support_offset="0.0" -s prime_tower_wipe_enabled="True" -s speed_wall_x="25.0" -s jerk_enabled="False" -s meshfix_fluid_motion_enabled="True" -s minimum_polygon_circumference="1.0" -s bridge_wall_material_flow="50" -s quality_name="Standard Quality" -s machine_extruders_share_nozzle="False" -s machine_steps_per_mm_z="50" -s support_tree_top_rate="30" -s cool_fan_enabled="True" -s gradual_flow_enabled="False" -s platform_adhesion="0" -s arcwelder_allow_3d_arcs="False" -s support_z_seam_away_from_model="True" -s raft_surface_line_width="0.4" -s mold_roof_height="0.5" -s draft_shield_height="10" -s material_end_of_filament_purge_length="20" -s support_material_flow="100" -s infill_line_width="0.4" -s mold_angle="40" -s meshfix_extensive_stitching="False" -s build_volume_fan_nr="0" -s brim_replaces_support="False" -s minimum_interface_area="10" -s alternate_extra_perimeter="False" -s material_bed_temperature_layer_0="60.0" -s flow_rate_extrusion_offset_factor="100" -s prime_tower_enable="False" -s extruder_prime_pos_z="0" -s retraction_prime_speed="25" -s print_sequence="all_at_once" -s bridge_skin_speed="12.5" -s wall_thickness="0.8" -s speed_z_hop="5" -s skin_no_small_gaps_heuristic="False" -s raft_remove_inside_corners="False" -s raft_base_margin="15" -s cool_during_extruder_switch="unchanged" -s prime_tower_base_size="8.0" -s machine_max_jerk_e="5" -s mesh_position_y="0" -s wall_0_start_speed_ratio="100.0" -s machine_steps_per_mm_y="50" -s infill_overlap_mm="0.12" -s support_top_distance="0.2" -s acceleration_travel_layer_0="500" -s coasting_min_volume="0.8" -s speed_support_roof="200.0" -s speed_wall_x_roofing="25.0" -s conical_overhang_enabled="False" -s support_tree_angle_slow="42.0" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s raft_base_fan_speed="0" -s machine_heated_bed="True" -s meshfix_keep_open_polygons="False" -s layer_height="0.1" -s raft_fan_speed="0" -s raft_surface_infill_overlap_mm="0.0" -s acceleration_support_infill="500" -s wall_0_inset="0" -s skirt_brim_minimal_length="250" -s raft_base_infill_overlap_mm="0.0" -s raft_smoothing="5" -s machine_max_acceleration_x="3000.0" -s machine_max_jerk_z="0.4" -s support_roof_enable="True" -s raft_base_line_spacing="1.6" -s wall_x_material_flow="100" -s raft_base_smoothing="5" -s support_bottom_stair_step_height="0" -s meshfix_fluid_motion_shift_distance="0.1" -s speed_wall_0_roofing="25.0" -s draft_shield_height_limitation="full" -s support_xy_distance_overhang="0.4" -s cool_lift_head="False" -s magic_spiralize="False" -s machine_start_gcode="START_PRINT BED_TEMP=60.0 EXTRUDER_TEMP=210.0 CHAMBER_TEMP=0 PRINT_MIN=%MINX%,%MINY% PRINT_MAX=%MAXX%,%MAXY%" -s support_conical_min_width="5.0" -s machine_endstop_positive_direction_y="False" -s support_tower_maximum_supported_diameter="3.0" -s wall_overhang_angle="90" -s retraction_combing="noskin" -s material_shrinkage_percentage="100.0" -s infill_line_distance="6.0" -s conical_overhang_hole_size="0" -s jerk_travel="8" -s support_zag_skip_count="10" -s scarf_split_distance="1.0" -s infill_mesh="False" -s support_join_distance="2.0" -s retraction_amount="6.5" -s cross_support_density_image="" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s material_bed_temp_wait="True" -s printer_settings="0" -s bridge_enable_more_layers="True" -s ppr="0" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s smooth_spiralized_contours="True" -s gradual_support_infill_step_height="1" -s wall_line_width="0.4" -s lightning_infill_prune_angle="40" -s material_standby_temperature="150" -s machine_disallowed_areas="[]" -s support_brim_line_count="10" -s fill_outline_gaps="False" -s support_bottom_extruder_nr="0" -s bridge_skin_density="100" -s top_skin_expand_distance="0.8" -s raft_surface_infill_overlap="0" -s mold_width="5" -s bridge_skin_speed_3="12.5" -s seam_overhang_angle="63" -s material_final_print_temperature="210" -s arcwelder_default_xyz_precision="3" -s material_print_temperature="210" -s material_end_of_filament_purge_speed="0.5" -s machine_scale_fan_speed_zero_to_one="False" -s infill="0" -s hole_xy_offset="0" -s magic_fuzzy_skin_enabled="False" -s cross_infill_density_image="" -s arcwelder_extrusion_rate_variance="5" -s jerk_print="8" -s switch_extruder_extra_prime_amount="0" -s min_even_wall_line_width="0.34" -s support_infill_angles="[ ]" -s wall_extruder_nr="-1" -s inset_direction="inside_out" -s raft_surface_jerk="8" -s switch_extruder_retraction_speed="20" -s support_infill_sparse_thickness="0.1" -s skin_edge_support_thickness="0" -s support_pattern="zigzag" -s raft_jerk="8" -s infill_sparse_density="20" -s infill_overlap="30.0" -s support_bottom_enable="True" -s support_extruder_nr_layer_0="0" -s scarf_joint_seam_start_height_ratio="0" -s roofing_angles="[ ]" -s support_bottom_material_flow="100" -s default_material_print_temperature="210" -s flow_anomaly_limit="25.0" -s bottom_thickness="0.5" -s adaptive_layer_height_enabled="False" -s raft_base_wall_count="1" -s infill_randomize_start_location="False" -s support_roof_line_width="0.4" -s support_bottom_density="33.333" -s remove_empty_first_layers="True" -s interlocking_depth="2" -s wall_distribution_count="1" -s ooze_shield_enabled="False" -s wall_0_material_flow_roofing="100" -s zig_zaggify_support="False" -s mesh_position_x="0" -s print_temp_anomaly_limit="7.0" -s material_adhesion_tendency="10" -s material_no_load_move_factor="0.940860215" -s small_feature_max_length="0.0" -s user_defined_print_order_enabled="False" -s bridge_skin_density_2="75" -s support_tree_max_diameter="25" -s wipe_retraction_speed="25" -s adhesion_z_offset_extensive_processing="False" -s machine_show_variants="False" -s support_bottom_line_distance="2.4000240002400024" -s raft_base_thickness="0.24" -s command_line_settings="0" -s wall_x_material_flow_roofing="100" -s machine_feeder_wheel_diameter="10.0" -s skirt_height="3" -s layer_height_0="0.2" -s initial_layer_line_width_factor="100.0" -s acceleration_skirt_brim="500" -s gantry_height="25" -s roofing_extruder_nr="-1" -s acceleration_wall_x_roofing="500" -s speed_travel_layer_0="100.0" -s resolution="0" -s cool_min_speed="10" -s support_z_distance="0.2" -s raft_surface_layers="2" -s minimum_bottom_area="10" -s raft_surface_remove_inside_corners="False" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.0" -s infill_sparse_thickness="0.1" -s support_supported_skin_fan_speed="100" -s support_mesh="False" -s machine_depth="220" -s retraction_combing_max_distance="30" -s ppr_enable="False" -s retraction_count_max="100" -s z_seam_relative="False" -s support_interface_wall_count="0" -s skin_outline_count="1" -s day="Mon" -s support_mesh_drop_down="True" -s support_conical_angle="30" -s jerk_support_infill="8" -s switch_extruder_retraction_speeds="20" -s wipe_brush_pos_x="100" -s material_id="empty_material" -s material_print_temp_prepend="False" -s support_bottom_height="0.4" -s meshfix="0" -s raft_margin="15" -s raft_base_remove_inside_corners="False" -s raft_interface_infill_overlap="0" -s acceleration_print="500" -s acceleration_layer_0="500" -s flow_warn_limit="15.0" -s xy_offset="0" -s arcwelder_min_arc_segment="12" -s machine_heat_zone_length="16" -s material_bed_temperature="60.0" -s support_tower_roof_angle="65" -s magic_fuzzy_skin_point_density="1.25" -s connect_skin_polygons="False" -s raft_base_extruder_nr="0" -s time="23:45:38" -s machine_always_write_active_tool="False" -s cool_fan_speed_min="100.0" -s machine_nozzle_tip_outer_diameter="1" -s jerk_topbottom="8" -s material_anti_ooze_retracted_position="-4" -s layer_start_y="0.0" -s speed_print="50.0" -s speed_support_interface="200.0" -s brim_width="8.0" -s support_extruder_nr="0" -s raft_interface_margin="15" -s skin_angles="[ ]" -s support_angle="63" -s support="0" -s retract_at_layer_change="False" -s bv_temp_warn_limit="7.5" -s print_bed_temperature="60.0" -s travel="0" -s machine_center_is_zero="False" -s skirt_brim_extruder_nr="-1" -s machine_max_jerk_xy="10" -s ironing_inset="0.38" -s z_seam_x="110.0" -s machine_acceleration="500" -s raft_base_flow="100.0" -s wall_overhang_speed_factor="100" -s interlocking_enable="False" -s extruders_enabled_count="1" -s interlocking_beam_width="0.8" -s brim_gap="0" -s speed="0" -s support_roof_angles="[ ]" -s zig_zaggify_infill="False" -s support_roof_density="33.333" -s prime_blob_enable="False" -s cool_min_layer_time_fan_speed_max="10" -s meshfix_union_all_remove_holes="False" -s jerk_wall="8" -s layer_0_max_flow_acceleration="1" -s machine_max_feedrate_y="500" -s meshfix_maximum_travel_resolution="0.25" -s support_interface_pattern="grid" -s raft_interface_z_offset="0.0" -s prime_tower_flow="100" -s interlocking_boundary_avoidance="2" -s material_name="empty" -s retraction_hop_after_extruder_switch_height="0.2" -s acceleration_ironing="500" -s support_tree_rest_preference="buildplate" -s mesh_position_z="0" -s speed_support_infill="200.0" -s lightning_infill_support_angle="40" -s machine_settings="0" -s support_conical_enabled="False" -s arcwelder_g90_influences_extruder="False" -s jerk_support_interface="8" -s jerk_support_bottom="8" -s cooling="0" -s experimental="0" -s infill_mesh_order="0" -s skirt_brim_material_flow="100" -s machine_nozzle_heat_up_speed="2.0" -s material_shrinkage_percentage_xy="100.0" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s support_bottom_line_width="0.4" -s ooze_shield_angle="60" -s interlocking_beam_layer_count="2" -s prime_tower_line_width="0.4" -s roofing_monotonic="True" -s wall_x_extruder_nr="-1" -s support_roof_height="0.4" -s hole_xy_offset_max_diameter="0" -s support_infill_extruder_nr="0" -s ironing_line_spacing="0.1" -s wipe_retraction_enable="True" -s ironing_only_highest_layer="False" -s raft_wall_count="1" -s material_alternate_walls="False" -s bridge_fan_speed_2="0" -s min_feature_size="0.1" -s machine_nozzle_cool_down_speed="2.0" -s bottom_skin_preshrink="0.8" -s default_material_bed_temperature="60.0" -s support_roof_extruder_nr="0" -s support_skip_zag_per_mm="20" -s infill_pattern="cubic" -s material_guid="" -s skin_preshrink="0.8" -s raft_acceleration="500" -s max_flow_acceleration="1" -s brim_location="outside" -s support_skip_some_zags="False" -s machine_nozzle_expansion_angle="45" -s extruder_prime_pos_x="0" -s material_brand="empty_brand" -s raft_interface_flow="100.0" -s interlocking_orientation="22.5" -s ironing_enabled="False" -s bottom_layers="5" -s material_extrusion_cool_down_speed="0.7" -s extra_infill_lines_to_support_skins="walls_and_lines" -s raft_surface_fan_speed="0" -s material_flow_layer_0="100" -s material_break_preparation_speed="2" -s speed_support_bottom="200.0" -s jerk_wall_0="8" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s bridge_skin_material_flow="60" -s arcwelder_allow_travel_arcs="False" -s build_volume_temperature="0" -s acceleration_travel_enabled="True" -s infill_enable_travel_optimization="False" -s material_anti_ooze_retraction_speed="5" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s travel_avoid_other_parts="True" -s raft_surface_smoothing="5" -s retraction_enable="True" -s retraction_extra_prime_amount="0" -s magic_mesh_surface_mode="normal" -s jerk_wall_x="8" -s print_temperature="210" -s material_type="empty" -s adaptive_layer_height_threshold="0.2" -s speed_prime_tower="25.0" -s prime_tower_base_curve_magnitude="4" -s material_print_temperature_layer_0="210" -s bridge_fan_speed="100" -s z_seam_corner="z_seam_corner_weighted" -s raft_interface_infill_overlap_mm="0.0" -s adhesion_z_offset="0" -s minimum_roof_area="10" -s extruder_prime_pos_abs="False" -s jerk_prime_tower="8" -s wall_0_speed_split_distance="1.0" -s material_break_preparation_temperature="210" -s center_object="False" -s support_bottom_wall_count="0" -s meshfix_fluid_motion_angle="15" -s switch_extruder_prime_speed="20" -s support_line_distance="2.0" -s min_bead_width="0.34" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s adhesion_extruder_nr="-1" -s raft_surface_flow="100.0" -s infill_extruder_nr="-1" -s bridge_sparse_infill_max_density="0" -s skirt_gap="10.0" -s meshfix_maximum_resolution="0.25" -s brim_inside_margin="1.6" -s raft_base_acceleration="500" -s raft_surface_line_spacing="0.4" -s bridge_wall_speed="12.5" -s support_interface_extruder_nr="0" -s machine_max_feedrate_z="10" -s nozzle_disallowed_areas="[]" -s wall_transition_length="0.4" -s acceleration_travel="500" -s group_outer_walls="True" -s jerk_travel_enabled="True" -s raft_interface_line_width="0.8" -s jerk_infill="8" -s machine_max_acceleration_e="5000" -s support_roof_wall_count="0" -s anti_overhang_mesh="False" -s support_initial_layer_line_distance="2.0" -s roofing_pattern="lines" -s wall_0_end_speed_ratio="100.0" -s wall_line_count="2" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s cool_fan_speed="100.0" -s material_print_temp_wait="True" -s shell="0" -s support_xy_overrides_z="xy_overrides_z" -s max_skin_angle_for_expansion="90" -s support_interface_density="33.333" -s machine_extruder_count="1" -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s support_tree_limit_branch_reach="True" -s coasting_enable="False" -s support_tree_tip_diameter="0.8" -s raft_surface_speed="100.0" -s machine_minimum_feedrate="0.0" -s line_width="0.4" -s travel_retract_before_outer_wall="True" -s raft_interface_layers="1" -s support_bottom_stair_step_width="5.0" -s material_crystallinity="False" -s support_brim_width="4" -s machine_name="Creality Ender-3 Pro" -s arcwelder_maximum_radius="9999" -s support_xy_distance="0.8" -s magic_fuzzy_skin_point_dist="0.8" -s wipe_pause="0" -s skin_edge_support_layers="0" -s machine_heated_build_volume="True" -s support_interface_material_flow="100" -s machine_height="250" -s gradual_infill_steps="0" -s machine_max_acceleration_y="3000.0" -s support_interface_line_width="0.4" -s machine_max_acceleration_z="100" -s acceleration_support_bottom="500" -s roofing_layer_count="0" -s support_bottom_pattern="grid" -s raft_interface_thickness="0.15000000000000002" -s raft_surface_acceleration="500" -s arcwelder_resolution="0.05" -s cutting_mesh="False" -s small_feature_speed_factor="50" -s machine_width="220" -s expand_skins_expand_distance="0.8" -s support_tree_angle="63" -s raft_base_line_width="0.8" -s acceleration_topbottom="500" -s small_feature_speed_factor_0="50" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s roofing_line_width="0.4" -s print_temp_warn_limit="3.0" -s wall_0_material_flow="100" -s coasting_speed="90" -s bridge_wall_min_length="2.2" -s gradual_flow_discretisation_step_size="0.2" -s skirt_brim_speed="20.0" -s machine_buildplate_type="glass" -s acceleration_print_layer_0="500" -s z_seam_type="back" -s infill_support_enabled="False" -s draft_shield_dist="10" -s machine_nozzle_size="0.4" -s raft_base_jerk="8" -s minimum_support_area="0" -s machine_max_feedrate_x="500" -s skirt_brim_line_width="0.4" -s support_interface_height="0.4" -s ooze_shield_dist="2" -s support_roof_offset="0.0" -s mold_enabled="False" -s jerk_ironing="8" -s prime_tower_min_shell_thickness="0.4" -s acceleration_support_roof="500" -s bridge_fan_speed_3="0" -s connect_infill_polygons="False" -s top_bottom="0" -s jerk_support_roof="8" -s top_skin_preshrink="0.8" -s infill_wall_line_count="0" -s raft_interface_smoothing="5" -s wall_transition_angle="10" -s top_bottom_thickness="0.5" -s lightning_infill_overhang_angle="40" -s wall_0_extruder_nr="-1" -s material_is_support_material="False" -s speed_equalize_flow_width_factor="100.0" -s arcwelder_enable="False" -s raft_base_speed="75.0" -s slicing_tolerance="middle" -s support_meshes_present="False" -s cool_fan_full_layer="4" -s wipe_retraction_retract_speed="25" -s wipe_hop_amount="0.2" -s speed_ironing="16.666666666666668" -s cool_fan_full_at_height="0.4" -s z_seam_y="220" -s lightning_infill_straightening_angle="40" -s support_tree_branch_diameter="5" -s material_surface_energy="100" -s retraction_min_travel="1.5" -s wipe_hop_speed="5" -s ironing_flow="10.0" -s wall_x_material_flow_layer_0="100" -s speed_layer_0="20.0" -s top_thickness="0.5" -s raft_interface_acceleration="500" -s material_break_preparation_retracted_position="-16" -s wall_0_wipe_dist="0.0" -s clean_between_layers="False" -s skin_overlap="10.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s jerk_layer_0="8" -s jerk_wall_x_roofing="8" -s support_roof_material_flow="100" -s support_interface_offset="0.0" -s speed_wall_0="25.0" -s draft_shield_enabled="False" -s brim_line_count="20" -s arcwelder_mm_per_arc_segment="1.0" -s bridge_settings_enabled="False" -s retraction_extrusion_window="10" -s xy_offset_layer_0="0" -s speed_wall="25.0" -s skin_material_flow="100" -s support_tree_min_height_to_model="3" -s retraction_hop_enabled="False" -s acceleration_wall="500" -s raft_interface_jerk="8" -s cross_infill_pocket_size="6.0" -s machine_firmware_retract="False" -s small_skin_on_surface="False" -s cool_fan_speed_max="100.0" -s blackmagic="0" -s max_extrusion_before_wipe="10" -s raft_surface_monotonic="False" -s gradual_infill_step_height="1.5" -s top_layers="5" -s speed_support="200.0" -s bridge_skin_material_flow_2="100" -s prime_tower_min_volume="6" -s support_interface_enable="True" -s retraction_retract_speed="25" -s machine_use_extruder_offset_to_offset_coords="True" -s flow_rate_max_extrusion_offset="0" -s machine_nozzle_id="unknown" -s travel_avoid_supports="True" -s roofing_material_flow="100" -s magic_fuzzy_skin_outside_only="False" -s reset_flow_duration="2.0" -s scarf_joint_seam_length="0" -s acceleration_support="500" -s bridge_skin_speed_2="12.5" -s ironing_pattern="zigzag" -s raft_base_infill_overlap="0" -s carve_multiple_volumes="False" -s material="0" -s support_line_width="0.4" -s speed_print_layer_0="20.0" -s cool_fan_speed_0="0" -s machine_extruders_shared_nozzle_initial_retraction="0" -s raft_interface_speed="75.0" -s material_diameter="1.75" -s arcwelder_max_gcode_length="0" -s bridge_skin_material_flow_3="110" -s skin_monotonic="False" -s wipe_repeat_count="5" -s bottom_skin_expand_distance="0.8" -s skin_overlap_mm="0.04" -s raft_flow="100.0" -s dual="0" -s top_bottom_pattern_0="lines" -s acceleration_roofing="500" -s raft_interface_remove_inside_corners="False" -s support_interface_angles="[ ]" -s raft_surface_wall_count="0" -s travel_speed="150.0" -s prime_tower_brim_enable="False" -s wipe_retraction_extra_prime_amount="0" -s material_initial_print_temperature="210" -s wall_transition_filter_deviation="0.1" -s speed_slowdown_layers="2" -s support_wall_count="0" -s support_interface_priority="interface_area_overwrite_support_area" -s jerk_travel_layer_0="8" -s machine_min_cool_heat_time_window="50.0" -s material_flush_purge_length="60" -s top_bottom_pattern="lines" -s machine_endstop_positive_direction_z="True" -s speed_roofing="25.0" -s infill_before_walls="False" -s meshfix_maximum_deviation="0.025" -s acceleration_infill="500" -s support_roof_line_distance="2.4000240002400024" -s machine_end_gcode="END_PRINT" -s prime_tower_size="20" -s raft_surface_z_offset="0.0" -s raft_airgap="0.3" -s arcwelder_firmware_compensation="False" -s material_maximum_park_duration="300" -s retraction_hop_only_when_collides="False" -s prime_tower_position_x="208.175" -s bridge_skin_support_threshold="50" -s speed_topbottom="25.0" -s min_infill_area="0" -s retraction_speed="25" -s support_tree_branch_diameter_angle="7" -s support_connect_zigzags="True" -s travel_avoid_distance="0.625" -s z_seam_on_vertex="False" -s raft_surface_extruder_nr="0" -s material_flush_purge_speed="0.5" -s min_skin_width_for_expansion="3.061616997868383e-17" -s jerk_skirt_brim="8" -s support_tree_bp_diameter="7.5" -s jerk_support="8" -s wall_0_deceleration="20.0" -s retraction_hop="0.2" -s machine_extruders_share_heater="False" -s infill_offset_y="0" -s raft_surface_margin="15" -s infill_offset_x="0" -s speed_travel="150.0" -s top_bottom_extruder_nr="-1" -s material_break_retracted_position="-50" -s wall_material_flow="100" -s support_type="buildplate" -s support_infill_rate="20" -s material_bed_temp_prepend="False" -s jerk_wall_0_roofing="8" -s raft_surface_thickness="0.1" -s alternate_carve_order="True" -s acceleration_wall_0_roofing="500" -s machine_nozzle_temp_enabled="True" -s material_break_speed="25" -s meshfix_fluid_motion_small_distance="0.01" -s cool_min_layer_time="10" -s machine_steps_per_mm_x="50" -s optimize_wall_printing_order="True" -s prime_tower_position_y="188.175" -s support_fan_enable="False" -s prime_tower_mode="interleaved" -s retraction_hop_after_extruder_switch="True" -s support_z_seam_min_distance="0.8" -s layer_start_x="0.0" -s machine_max_feedrate_e="50" -s wall_0_acceleration="20.0" -s wipe_retraction_prime_speed="25" -s support_tower_diameter="3.0" -s support_brim_enable="True" -s support_bottom_distance="0" -s z_seam_position="back" -s prime_tower_max_bridging_distance="5" -s skirt_line_count="3" -s build_fan_full_at_height="0" -s adaptive_layer_height_variation_step="0.04" -s machine_head_with_fans_polygon="[[-26, 34], [-26, -32], [32, -32], [32, 34]]" -s material_break_temperature="50" -s wall_transition_filter_distance="100" -s speed_infill="50.0" -s switch_extruder_retraction_amount="16" -s adaptive_layer_height_variation="0.04" -s magic_fuzzy_skin_thickness="0.3" -s adhesion_type="skirt" -s support_roof_pattern="grid" -s jerk_print_layer_0="8" -s acceleration_wall_0="500" -s small_skin_width="0.8" -s gradual_support_infill_steps="0" -s conical_overhang_angle="50" -s extruder_prime_pos_y="0" -s arcwelder_default_e_precision="5" -s wipe_retraction_amount="6.5" -s material_flow="100" -s jerk_roofing="8" -s build_fan_full_layer="1" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s prime_tower_base_height="0.1" -s support_tree_branch_reach_limit="30" -s cool_min_temperature="210" -s wall_line_width_0="0.4" -s support_structure="tree" -s support_bottom_stair_step_min_slope="10.0" -s initial_bottom_layers="5" -s bv_temp_anomaly_limit="10.0" -s raft_speed="25.0" -s machine_endstop_positive_direction_x="False" -s small_hole_max_size="0" -s support_infill_density_multiplier_initial_layer="1" -s bridge_skin_density_3="80" -s support_enable="False" -s brim_smart_ordering="True" -s support_use_towers="True" -s wall_line_width_x="0.4" -s arcwelder_allow_dynamic_precision="False" -s bridge_wall_coast="100" -s acceleration_support_interface="500" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_shape="rectangular" -s relative_extrusion="False" -s acceleration_wall_x="500" -s material_shrinkage_percentage_z="100.0" -s prime_tower_raft_base_line_spacing="1.6" -s acceleration_enabled="False" -s skin_line_width="0.4" -s support_bottom_angles="[ ]" -s arcwelder_tolerance="5" -s ironing_monotonic="False" -s date="11-11-2024" -s initial_extruder_nr="0" -s nozzle_offsetting_for_disallowed_areas="True" -e0 -s support_brim_enable="True" -s raft_base_thickness="0.24" -s command_line_settings="0" -s support_z_seam_min_distance="0.8" -s infill_multiplier="1" -s acceleration_prime_tower="500" -s raft_interface_wall_count="0" -s wall_0_material_flow_roofing="100" -s support_offset="0.0" -s prime_tower_wipe_enabled="True" -s speed_wall_x="200.0" -s roofing_angles="[ ]" -s infill_overlap_mm="0.12" -s support_top_distance="0.2" -s material_end_of_filament_purge_length="20" -s mold_roof_height="0.5" -s raft_surface_line_width="0.4" -s support_z_seam_away_from_model="True" -s support_bottom_line_distance="2.4000240002400024" -s support_material_flow="100" -s infill_line_width="0.4" -s mold_angle="40" -s meshfix_extensive_stitching="False" -s brim_replaces_support="False" -s minimum_interface_area="10" -s bridge_skin_speed="100.0" -s wall_thickness="0.8" -s wall_0_start_speed_ratio="100.0" -s machine_steps_per_mm_y="50" -s flow_anomaly_limit="25.0" -s bottom_thickness="0.5" -s raft_base_wall_count="1" -s acceleration_travel_layer_0="500" -s coasting_min_volume="0.8" -s speed_support_roof="200.0" -s speed_wall_x_roofing="200.0" -s skirt_line_count="3" -s conical_overhang_enabled="False" -s support_tree_angle_slow="42.0" -s support_tree_branch_diameter_angle="7" -s infill_angles="[ ]" -s support_bottom_offset="0.0" -s raft_base_fan_speed="0" -s meshfix_keep_open_polygons="False" -s raft_fan_speed="0" -s raft_surface_infill_overlap_mm="0.0" -s acceleration_support_infill="500" -s wall_0_inset="0" -s skirt_brim_minimal_length="250" -s raft_base_infill_overlap_mm="0.0" -s support_roof_enable="True" -s raft_base_line_spacing="1.6" -s wall_x_material_flow="100" -s support_bottom_stair_step_height="0" -s meshfix_fluid_motion_shift_distance="0.1" -s speed_wall_0_roofing="200.0" -s support_xy_distance_overhang="0.4" -s cool_lift_head="False" -s support_conical_min_width="5.0" -s support_zag_skip_count="10" -s scarf_split_distance="1.0" -s support_join_distance="2.0" -s retraction_amount="1.5" -s cross_support_density_image="" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s printer_settings="0" -s bridge_enable_more_layers="True" -s ppr="0" -s sub_div_rad_add="0.4" -s machine_steps_per_mm_e="1600" -s gradual_support_infill_step_height="1" -s wall_line_width="0.4" -s lightning_infill_prune_angle="40" -s material_standby_temperature="195.0" -s support_brim_line_count="10" -s fill_outline_gaps="False" -s bridge_skin_density="100" -s top_skin_expand_distance="399.6" -s raft_surface_infill_overlap="0" -s mold_width="5" -s bridge_skin_speed_3="100.0" -s seam_overhang_angle="63" -s material_final_print_temperature="210.0" -s meshfix_fluid_motion_enabled="True" -s machine_extruder_start_pos_y="0" -s speed_z_hop="5" -s skin_no_small_gaps_heuristic="False" -s material_adhesion_tendency="10" -s small_feature_max_length="0.0" -s material_no_load_move_factor="0.940860215" -s zig_zaggify_support="False" -s mesh_position_x="0" -s print_temp_anomaly_limit="7.0" -s raft_interface_infill_overlap="0" -s machine_extruder_end_code_duration="0" -s acceleration_print="500" -s infill="0" -s hole_xy_offset="0.1" -s prime_tower_max_bridging_distance="5" -s machine_endstop_positive_direction_y="False" -s support_tower_maximum_supported_diameter="3.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s gradual_flow_enabled="False" -s platform_adhesion="0" -s support_infill_angles="[ ]" -s inset_direction="inside_out" -s raft_surface_jerk="8" -s switch_extruder_retraction_speed="20" -s support_infill_sparse_thickness="0.1" -s support_pattern="zigzag" -s skin_edge_support_thickness="0" -s raft_jerk="8" -s support_bottom_material_flow="100" -s default_material_print_temperature="210.0" -s infill_sparse_density="0" -s infill_overlap="30.0" -s scarf_joint_seam_start_height_ratio="0" -s infill_randomize_start_location="False" -s support_roof_line_width="0.4" -s support_bottom_density="33.333" -s acceleration_wall_x_roofing="500" -s speed_travel_layer_0="100.0" -s wall_distribution_count="1" -s bridge_skin_density_2="75" -s support_tree_max_diameter="25" -s wipe_retraction_speed="120.0" -s jerk_print_layer_0="8" -s skirt_height="3" -s machine_feeder_wheel_diameter="10.0" -s wall_x_material_flow_roofing="100" -s acceleration_skirt_brim="500" -s resolution="0" -s cool_min_speed="10" -s support_z_distance="0.2" -s raft_surface_layers="2" -s minimum_bottom_area="10" -s min_wall_line_width="0.34" -s infill_wipe_dist="0.0" -s support_supported_skin_fan_speed="100" -s infill_sparse_thickness="0.1" -s skin_outline_count="1" -s support_interface_wall_count="0" -s z_seam_relative="False" -s retraction_combing_max_distance="30" -s retraction_count_max="100" -s jerk_support_infill="8" -s support_conical_angle="30" -s switch_extruder_retraction_speeds="20" -s wipe_brush_pos_x="100" -s support_bottom_height="0.4" -s meshfix="0" -s gradual_support_infill_steps="0" -s acceleration_layer_0="500" -s min_infill_area="0" -s flow_warn_limit="15.0" -s xy_offset="0" -s support_tower_roof_angle="65" -s cool_fan_speed_min="100.0" -s machine_nozzle_tip_outer_diameter="1" -s jerk_topbottom="8" -s material_anti_ooze_retracted_position="-4" -s layer_start_y="0.0" -s speed_print="200.0" -s machine_nozzle_head_distance="3" -s support_bottom_distance="0" -s speed_support_interface="200.0" -s brim_width="8.0" -s support_angle="63" -s support="0" -s machine_extruder_start_code=";test" -s retract_at_layer_change="False" -s travel="0" -s ironing_inset="0.38" -s z_seam_x="0" -s raft_base_flow="100.0" -s wall_overhang_speed_factor="100" -s interlocking_beam_width="0.8" -s support_bottom_enable="True" -s speed="0" -s support_roof_angles="[ ]" -s zig_zaggify_infill="False" -s brim_gap="0" -s support_roof_density="33.333" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_union_all_remove_holes="False" -s jerk_wall="8" -s support_interface_pattern="grid" -s speed_infill="200.0" -s raft_interface_z_offset="0.0" -s prime_tower_flow="100" -s retraction_hop_after_extruder_switch_height="0.2" -s acceleration_ironing="500" -s support_tree_rest_preference="buildplate" -s mesh_position_z="0" -s speed_support_infill="200.0" -s machine_extruder_end_code="" -s lightning_infill_support_angle="40" -s machine_settings="0" -s jerk_support_bottom="8" -s jerk_support_interface="8" -s machine_extruder_start_pos_abs="False" -s raft_surface_thickness="0.1" -s cooling="0" -s experimental="0" -s skirt_brim_material_flow="100" -s machine_nozzle_heat_up_speed="2.0" -s roofing_monotonic="True" -s prime_tower_line_width="0.4" -s support_tower_diameter="3.0" -s hole_xy_offset_max_diameter="0" -s ironing_line_spacing="0.1" -s wipe_retraction_enable="True" -s layer_0_max_flow_acceleration="1" -s meshfix_maximum_travel_resolution="0.25" -s ironing_only_highest_layer="False" -s material_alternate_walls="False" -s raft_wall_count="1" -s bridge_fan_speed_2="0" -s min_feature_size="0.1" -s machine_nozzle_cool_down_speed="2.0" -s bottom_skin_preshrink="399.6" -s support_skip_zag_per_mm="20" -s infill_pattern="cubic" -s material_guid="c62b9825-18cd-449a-8ecf-89283dc40dcf" -s skin_preshrink="399.6" -s raft_acceleration="500" -s max_flow_acceleration="1" -s brim_location="outside" -s support_skip_some_zags="False" -s extruder_prime_pos_x="0" -s material_brand="eSUN" -s raft_interface_flow="100.0" -s ironing_enabled="False" -s bottom_layers="5" -s material_extrusion_cool_down_speed="0.7" -s extra_infill_lines_to_support_skins="walls_and_lines" -s support_conical_enabled="False" -s raft_surface_fan_speed="0" -s material_flow_layer_0="100" -s material_break_preparation_speed="2" -s speed_support_bottom="200.0" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s jerk_wall_0="8" -s material_anti_ooze_retraction_speed="5" -s layer_0_z_overlap="0.15" -s wipe_move_distance="20" -s raft_interface_fan_speed="0" -s machine_extruder_start_pos_x="0" -s travel_avoid_other_parts="True" -s layer_start_x="0.0" -s retraction_enable="True" -s retraction_extra_prime_amount="0" -s magic_mesh_surface_mode="normal" -s small_skin_width="0.8" -s jerk_wall_x="8" -s jerk_roofing="8" -s speed_prime_tower="200.0" -s machine_heat_zone_length="16" -s material_print_temperature_layer_0="210.0" -s bridge_fan_speed="100" -s raft_interface_infill_overlap_mm="0.0" -s z_seam_corner="z_seam_corner_weighted" -s minimum_roof_area="10" -s extruder_prime_pos_abs="False" -s jerk_prime_tower="8" -s wall_0_speed_split_distance="1.0" -s material_break_preparation_temperature="210.0" -s center_object="False" -s meshfix_fluid_motion_angle="15" -s switch_extruder_prime_speed="20" -s support_bottom_wall_count="0" -s support_line_distance="2.0" -s min_bead_width="0.34" -s raft_interface_line_spacing="1.0" -s meshfix_union_all="True" -s bridge_wall_material_flow="50" -s raft_interface_margin="15" -s skin_angles="[ ]" -s connect_skin_polygons="False" -s magic_fuzzy_skin_point_density="1.25" -s raft_surface_flow="100.0" -s material_print_temperature="210.0" -s material_end_of_filament_purge_speed="0.5" -s extruder_nr="0" -s skirt_gap="10.0" -s meshfix_maximum_resolution="0.25" -s brim_inside_margin="1.6" -s raft_base_acceleration="500" -s raft_surface_line_spacing="0.4" -s machine_extruder_start_code_duration="0" -s wall_transition_length="0.4" -s acceleration_travel="500" -s group_outer_walls="True" -s raft_interface_line_width="0.8" -s jerk_infill="8" -s infill_line_distance="0" -s conical_overhang_hole_size="0" -s jerk_travel="8" -s initial_layer_line_width_factor="100.0" -s magic_fuzzy_skin_enabled="False" -s jerk_print="8" -s switch_extruder_extra_prime_amount="0" -s min_even_wall_line_width="0.34" -s cross_infill_density_image="" -s support_tree_branch_reach_limit="30" -s support_initial_layer_line_distance="2.0" -s wall_0_end_speed_ratio="100.0" -s roofing_pattern="lines" -s infill_offset_x="0" -s wall_line_count="999" -s min_odd_wall_line_width="0.34" -s coasting_volume="0.064" -s machine_extruder_end_pos_x="0" -s cool_fan_speed="100.0" -s infill_enable_travel_optimization="False" -s shell="0" -s support_xy_overrides_z="xy_overrides_z" -s max_skin_angle_for_expansion="90" -s support_interface_density="33.333" -s wipe_hop_enable="False" -s skin_material_flow_layer_0="100" -s wipe_retraction_prime_speed="120.0" -s support_tree_limit_branch_reach="True" -s support_roof_height="0.4" -s coasting_enable="False" -s support_tree_tip_diameter="0.8" -s raft_surface_speed="100.0" -s support_roof_wall_count="0" -s line_width="0.4" -s raft_interface_layers="1" -s support_xy_distance="0.8" -s support_bottom_stair_step_width="5.0" -s material_crystallinity="False" -s support_brim_width="4" -s magic_fuzzy_skin_point_dist="0.8" -s skin_edge_support_layers="0" -s wipe_pause="0" -s support_interface_material_flow="100" -s roofing_layer_count="0" -s support_bottom_pattern="grid" -s expand_skins_expand_distance="399.6" -s support_tree_angle="63" -s raft_base_line_width="0.8" -s acceleration_topbottom="500" -s small_feature_speed_factor_0="50" -s multiple_mesh_overlap="0.15" -s infill_support_angle="40" -s roofing_line_width="0.4" -s print_temp_warn_limit="3.0" -s wall_0_material_flow="100" -s gradual_flow_discretisation_step_size="0.2" -s coasting_speed="90" -s skirt_brim_speed="20.0" -s acceleration_print_layer_0="500" -s z_seam_type="sharpest_corner" -s infill_support_enabled="False" -s machine_nozzle_size="0.4" -s raft_base_jerk="8" -s minimum_support_area="0" -s skirt_brim_line_width="0.4" -s support_roof_pattern="grid" -s support_interface_height="0.4" -s mold_enabled="False" -s support_roof_offset="0.0" -s jerk_ironing="8" -s wall_line_width_0="0.4" -s acceleration_support_roof="500" -s min_skin_width_for_expansion="8.572527594031473e-17" -s bridge_fan_speed_3="0" -s connect_infill_polygons="False" -s top_bottom="0" -s jerk_support_roof="8" -s top_skin_preshrink="399.6" -s infill_wall_line_count="0" -s wall_transition_angle="10" -s gradual_infill_steps="0" -s support_interface_line_width="0.4" -s small_feature_speed_factor="50" -s lightning_infill_overhang_angle="40" -s top_bottom_thickness="0.5" -s material_is_support_material="False" -s speed_equalize_flow_width_factor="100.0" -s slicing_tolerance="middle" -s cool_fan_full_layer="4" -s machine_nozzle_temp_enabled="True" -s material_break_speed="25" -s wipe_retraction_retract_speed="120.0" -s machine_extruder_end_pos_y="0" -s speed_roofing="200.0" -s wipe_hop_amount="0.2" -s raft_base_speed="75.0" -s speed_ironing="133.33333333333334" -s machine_steps_per_mm_z="50" -s support_tree_top_rate="30" -s cool_fan_full_at_height="0.4" -s lightning_infill_straightening_angle="40" -s z_seam_y="220" -s support_tree_branch_diameter="5" -s material_surface_energy="100" -s material_type="PLA" -s retraction_min_travel="1.5" -s wipe_hop_speed="5" -s ironing_flow="10.0" -s acceleration_support_bottom="500" -s wall_x_material_flow_layer_0="100" -s speed_layer_0="20.0" -s top_thickness="1.4" -s raft_interface_acceleration="500" -s wall_0_wipe_dist="0.0" -s material_break_preparation_retracted_position="-16" -s clean_between_layers="False" -s skin_overlap="10.0" -s meshfix_maximum_extrusion_area_deviation="50000" -s jerk_layer_0="8" -s jerk_wall_x_roofing="8" -s support_roof_material_flow="100" -s support_interface_offset="0.0" -s speed_wall_0="200.0" -s brim_line_count="20" -s bridge_sparse_infill_max_density="0" -s xy_offset_layer_0="0" -s speed_wall="200.0" -s skin_material_flow="100" -s retraction_hop_enabled="False" -s support_tree_min_height_to_model="3" -s acceleration_wall="500" -s raft_interface_jerk="8" -s machine_extruder_end_pos_abs="False" -s cross_infill_pocket_size="0" -s small_skin_on_surface="False" -s cool_fan_speed_max="100.0" -s blackmagic="0" -s max_extrusion_before_wipe="10" -s raft_surface_monotonic="False" -s raft_margin="15" -s gradual_infill_step_height="1.5" -s top_layers="14" -s speed_support="200.0" -s prime_tower_min_volume="6" -s bridge_skin_material_flow_2="100" -s support_interface_enable="True" -s jerk_wall_0_roofing="8" -s retraction_retract_speed="120.0" -s machine_nozzle_id="unknown" -s travel_avoid_supports="True" -s roofing_material_flow="100" -s magic_fuzzy_skin_outside_only="False" -s reset_flow_duration="2.0" -s bridge_skin_speed_2="100.0" -s acceleration_support="500" -s scarf_joint_seam_length="1" -s ironing_pattern="zigzag" -s material="0" -s support_line_width="0.4" -s cool_fan_speed_0="0" -s speed_print_layer_0="20.0" -s machine_extruders_shared_nozzle_initial_retraction="0" -s raft_interface_speed="75.0" -s material_diameter="1.75" -s bridge_skin_material_flow_3="110" -s skin_monotonic="False" -s wipe_repeat_count="5" -s bottom_skin_expand_distance="399.6" -s skin_overlap_mm="0.04" -s raft_flow="100.0" -s dual="0" -s acceleration_roofing="500" -s top_bottom_pattern_0="lines" -s support_interface_angles="[ ]" -s raft_surface_wall_count="0" -s wipe_retraction_extra_prime_amount="0" -s material_initial_print_temperature="210.0" -s wall_transition_filter_deviation="0.1" -s support_wall_count="0" -s jerk_travel_layer_0="8" -s machine_min_cool_heat_time_window="50.0" -s machine_nozzle_offset_x="0" -s material_flush_purge_length="60" -s raft_surface_acceleration="500" -s raft_interface_thickness="0.15000000000000002" -s mesh_position_y="0" -s material_break_retracted_position="-50" -s top_bottom_pattern="lines" -s machine_endstop_positive_direction_z="True" -s infill_before_walls="False" -s wall_transition_filter_distance="100" -s meshfix_maximum_deviation="0.025" -s acceleration_infill="500" -s support_roof_line_distance="2.4000240002400024" -s raft_surface_z_offset="0.0" -s raft_airgap="0.3" -s machine_extruder_cooling_fan_number="0" -s alternate_extra_perimeter="False" -s material_maximum_park_duration="300" -s retraction_hop_only_when_collides="False" -s bridge_wall_speed="100.0" -s bridge_skin_support_threshold="50" -s speed_topbottom="200.0" -s retraction_speed="120.0" -s support_connect_zigzags="True" -s travel_avoid_distance="0.625" -s material_flush_purge_speed="0.5" -s jerk_skirt_brim="8" -s raft_base_margin="15" -s support_tree_bp_diameter="7.5" -s jerk_support="8" -s wall_0_deceleration="20.0" -s retraction_hop="0.2" -s infill_offset_y="0" -s raft_surface_margin="15" -s machine_nozzle_offset_y="0" -s extruder_prime_pos_z="0" -s retraction_prime_speed="120.0" -s speed_travel="250.0" -s support_bottom_line_width="0.4" -s wall_material_flow="100" -s support_infill_rate="20" -s acceleration_wall_0_roofing="500" -s meshfix_fluid_motion_small_distance="0.01" -s cool_min_layer_time="10" -s machine_steps_per_mm_x="50" -s optimize_wall_printing_order="True" -s support_fan_enable="False" -s retraction_hop_after_extruder_switch="True" -s wall_0_acceleration="20.0" -s z_seam_position="backleft" -s material_break_temperature="50" -s switch_extruder_retraction_amount="16" -s magic_fuzzy_skin_thickness="0.3" -s acceleration_wall_0="500" -s conical_overhang_angle="50" -s extruder_prime_pos_y="0" -s wipe_retraction_amount="1.5" -s material_flow="100" -s bridge_skin_material_flow="60" -s infill_material_flow="100" -s wall_0_material_flow_layer_0="100" -s cool_min_temperature="210.0" -s z_seam_on_vertex="False" -s support_bottom_stair_step_min_slope="10.0" -s initial_bottom_layers="5" -s raft_speed="100.0" -s machine_endstop_positive_direction_x="False" -s small_hole_max_size="0" -s support_infill_density_multiplier_initial_layer="1" -s raft_base_infill_overlap="0" -s bridge_skin_density_3="80" -s brim_smart_ordering="True" -s support_use_towers="True" -s wall_line_width_x="0.4" -s bridge_wall_coast="100" -s acceleration_support_interface="500" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_wall_x="500" -s prime_tower_raft_base_line_spacing="1.6" -s skin_line_width="0.4" -s support_bottom_angles="[ ]" -s retraction_extrusion_window="10" -s ironing_monotonic="False" -g -e0 -l "0" -s extruder_nr="0" 2024-11-11 23:45:38,814 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:38,815 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.812] [info] Progress: start accomplished in 0.000s 2024-11-11 23:45:38,816 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.812] [info] Starting slice... 2024-11-11 23:45:38,816 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.812] [info] Slicing model... 2024-11-11 23:45:38,839 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.839] [info] Slice of mesh took 0.027 seconds 2024-11-11 23:45:38,854 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.854] [info] Make polygons took 0.015 seconds 2024-11-11 23:45:38,855 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.854] [info] Progress: slice accomplished in 0.042s 2024-11-11 23:45:38,856 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.854] [info] Starting layerparts... 2024-11-11 23:45:38,860 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.860] [info] Progress: layerparts accomplished in 0.006s 2024-11-11 23:45:38,861 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:38.860] [info] Starting inset+skin... 2024-11-11 23:45:39,086 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.086] [info] Progress: inset+skin accomplished in 0.226s 2024-11-11 23:45:39,087 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.086] [info] Starting support... 2024-11-11 23:45:39,188 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.189] [info] Progress: support accomplished in 0.103s 2024-11-11 23:45:39,189 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.189] [info] Starting export... 2024-11-11 23:45:39,347 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.348] [info] Progress: export accomplished in 0.159s 2024-11-11 23:45:39,348 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.348] [info] Sending 349 layers. 2024-11-11 23:45:39,349 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.348] [info] Total time elapsed 0.536s 2024-11-11 23:45:39,349 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:39,350 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.351] [info] Print time (s): 2756 2024-11-11 23:45:39,351 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.351] [info] Print time (hr|min|s): 0h 45m 56s 2024-11-11 23:45:39,351 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.351] [info] Filament (mm^3): 1062 2024-11-11 23:45:39,606 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.607] [info] Closing sentry 2024-11-11 23:45:39,724 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2024-11-11 23:45:39.723] [info] Closing connection. 2024-11-11 23:45:39,765 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:39,766 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Cura_SteamEngine version 5.9.0-beta.2 2024-11-11 23:45:39,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:39,767 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Copyright (C) 2024 Ultimaker 2024-11-11 23:45:39,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:39,768 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is free software: you can redistribute it and/or modify 2024-11-11 23:45:39,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] it under the terms of the GNU Affero General Public License as published by 2024-11-11 23:45:39,769 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] the Free Software Foundation, either version 3 of the License, or 2024-11-11 23:45:39,770 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] (at your option) any later version. 2024-11-11 23:45:39,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:39,771 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is distributed in the hope that it will be useful, 2024-11-11 23:45:39,772 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2024-11-11 23:45:39,772 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2024-11-11 23:45:39,773 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] GNU Affero General Public License for more details. 2024-11-11 23:45:39,773 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 2024-11-11 23:45:39,774 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] You should have received a copy of the GNU Affero General Public License 2024-11-11 23:45:39,774 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/. 2024-11-11 23:45:39,792 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [869]: Slicing took 1.3670156002044678 seconds 2024-11-11 23:45:39,792 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [870]: Number of models per buildplate: {0: 1} 2024-11-11 23:45:39,794 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [884]: See if there is more to slice... 2024-11-11 23:45:39,794 - DEBUG - [JobQueueWorker [8]] CuraEngineBackend.ProcessSlicedLayersJob.run [74]: Processing new layer for build plate 0... 2024-11-11 23:45:39,950 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [240]: Socket state changed to Closing 2024-11-11 23:45:39,952 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [264]: Socket debug: Arcus Error (14): Closing socket because other side requested close. 2024-11-11 23:45:39,954 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [242]: Socket state changed to Closed 2024-11-11 23:45:39,957 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [1070]: Backend finished slicing. Resetting process and socket. 2024-11-11 23:45:40,075 - DEBUG - [JobQueueWorker [8]] CuraEngineBackend.ProcessSlicedLayersJob.run [254]: Processing layers took 0.2805452346801758 seconds 2024-11-11 23:45:40,253 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [1109]: See if there is more to slice(2)... 2024-11-11 23:45:40,747 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [339]: Creating thumbnail image (just before slice)... 2024-11-11 23:45:40,749 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [252]: Changing perspective mode to orthographic. 2024-11-11 23:45:40,750 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\overhang.shader]... 2024-11-11 23:45:40,753 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\transparent_object.shader]... 2024-11-11 23:45:40,755 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\UltiMaker Cura 5.9.0-beta.2\share\cura\resources\shaders\striped.shader]...