search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.11k stars 2.06k forks source link

[3.5.0] Gaps fill #4760

Open Liger0 opened 5 years ago

Liger0 commented 5 years ago

Application Version 3.5.0

Platform Windows 10 x64

Printer Cr-10S

Steps to Reproduce Use any model.

Actual Results It won't fill most of the big gaps, but it will fill the very small ones

Expected results It fills the small gaps altogether with the small ones

Additional Information

cura infill

diegopradogesto commented 5 years ago

There is a setting that will ignore the tiny gaps: "Filter out tiny gaps". However that has nothing to do with bigger gaps. Can you please attach the project file?

Liger0 commented 5 years ago

There is a setting that will ignore the tiny gaps: "Filter out tiny gaps". However that has nothing to do with bigger gaps. Can you please attach the project file?

CCR10S_base.zip As far as I see, the gap infill is only done between 2 green perimeters or between the yellow perimeter and the green one. It isn't done between the infill and yellow perimeters.