search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.17k stars 2.08k forks source link

wanhao duplicator i3 no mods , not connect to cura ultimaker 3,6 Suggestion ? #5381

Open miguelcnc opened 5 years ago

miguelcnc commented 5 years ago

i connect my wanhao duplicator i3 , standard , without important modifes , only goood alignement of belt and bed ,

i install the 3.6 versio n of ultimaker cura , but i can't connect the sw to my printer, with other sw ( matter control ) work fine ...

any suggestion for me ? i reinstall win 7 64 clean and i ( crazy.... ) upgrade all ms updates, but nothing change , the sw ask me " not connected to the printer ks to the comunity for help ." any idea for solve this issue ?

thanks , Stefano , Fron ITALY

Ghostkeeper commented 5 years ago

You're connecting via USB cable?

Maybe MatterControl can tell you what Baud rate it is using in order to connect?

miguelcnc commented 5 years ago

Hi , yes i hVe connected via usb cable , the speed of ports are 115200 , i try also to update drivers for the interface converter and also for usb port , but nothing change , if i use other sw ( matter control ) the Machine print.... I Begin to be crazy ...The cable is good mini usb ended long 1 mt only , the os is win 7 64 , i reinstall also from dvd and all drivers are ( i suppose ) correct , i tri with 2 notebook  and same issue...Inviato da smartphone Samsung Galaxy.

Ghostkeeper commented 5 years ago

115200 seems normal. It's the first baud rate that Cura will try, even. Since your printer connected fine with MatterControl but not with Cura, the fault seems to be in Cura. Not with any cables, drivers or OS.

However I have no way to debug this since I don't have a Wanhao Duplicator 1 here. I can't test anything.

miguelcnc commented 5 years ago

are you developer of cura team ? if you like , i can also permit you to connect to my pc with teamviewer , so you can check if all is in order ...

Thanks for now, if think matter control , use proprietary drivers to connect to the printer, but the melzi board use the ftdi drivers and is updated drivers... i begin to be crazy -... thanks fo rnow .

----Messaggio originale----

Da: notifications@github.com

Data: 5-mar-2019 17.16

A: "Ultimaker/Cura"Cura@noreply.github.com

Cc: "miguelcnc"miguelcnc@alice.it, "Author"author@noreply.github.com

Ogg: Re: [Ultimaker/Cura] wanhao duplicator i3 no mods , not connect to cura ultimaker 3,6 Suggestion ? (#5381)

115200 seems normal. It's the first baud rate that Cura will try, even. Since your printer connected fine with MatterControl but not with Cura, the fault seems to be in Cura. Not with any cables, drivers or OS.

However I have no way to debug this since I don't have a Wanhao Duplicator 1 here. I can't test anything. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

Ghostkeeper commented 5 years ago

Yes, I'm one of the Cura developers. But I think that even in a remote desktop application I couldn't help a whole lot. I would check the baud rates and if it responds to M105 g-code, but that's all I could really do. I can't really debug a lot of things without my developer environment.

miguelcnc commented 5 years ago

i check in the later afternoon ... and i reply you . Thsanks for now . Stefano

----Messaggio originale----

Da: notifications@github.com

Data: 7-mar-2019 9.59

A: "Ultimaker/Cura"Cura@noreply.github.com

Cc: "miguelcnc"miguelcnc@alice.it, "Author"author@noreply.github.com

Ogg: Re: [Ultimaker/Cura] wanhao duplicator i3 no mods , not connect to cura ultimaker 3,6 Suggestion ? (#5381)

Yes, I'm one of the Cura developers. But I think that even in a remote desktop application I couldn't help a whole lot. I would check the baud rates and if it responds to M105 g-code, but that's all I could really do. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.