search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.08k stars 2.06k forks source link

Slicing concentric top layer not possible #7027

Closed rocky-mech closed 4 years ago

rocky-mech commented 4 years ago

Application version Ultimaker Cura 4.4.1

Platform Windows 10 Pro (de) / Intel Core i7-6700K @ 4GHz 64GB RAM / Nvidia GeForce GTX 760

Printer OctoPrint 1.3.12 auf OctoPi 0.16.0 / Anycubic i3 Mega

Reproduction steps

  1. Part exported as AMF and also as STL file
  2. Slicing: All Top- and Buttom layers set to concentric

Screenshot(s) Slicing ok - Cura 4.3.0 https://drive.google.com/file/d/1d6N365C54bDrU3ucflkCxoHto3bOaX-i/view?usp=sharing Slicing the last layer with lines - Cura 4.4.1 https://drive.google.com/file/d/1WS6W3kEup9fWQm2Euose6f4qtkZsDQVw/view?usp=sharing

Actual results

  1. Buttom layer is concentric but the last top layer is slieced with lines (AMF and STL shows the same result).
  2. Crosscheck with the older Cura 4.3.0 shows the expectet result (all layers are concentric) by using the same settings for Top/Buttom layers.
rocky-mech commented 4 years ago

8-) !!! Top Surface Skin pattern was set to lines 8-) I've changed to Concentric,everthing gone well.