search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.18k stars 2.08k forks source link

Cannot slice when using one at a time option when model is rather wide #7170

Closed alpha8196 closed 4 years ago

alpha8196 commented 4 years ago

Application version 4.4.1

Platform Win10 , 960M

Printer I3 clone, not linked to Cura

Reproduction steps slice with all at a time, everything is fine slice with one at a time, failed with super big grey area also same result if start with one at a time selected

if the object is small enough it would be fine, but when it is large enough, even with enough space for the extruder, it would still fail to slice

Screenshot(s)

before image

after image

Actual results unable to slice Expected results Slicing Project file

Bed_Leveling_Test.zip

Log file

2020-02-27 23:45:18,041 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-27 23:45:18,042 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-27 23:45:18,048 - WARNING - [Thread-7] UM.Decorators.deprecated_function [19]: <function GlobalStack.extruders at 0x00000211BB43ED08> is deprecated (since 4.4): Please use extruderList instead.
2020-02-27 23:45:18,624 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.5814735889434814 seconds
2020-02-27 23:45:18,776 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s raft_base_acceleration="3000" -s switch_extruder_retraction_speeds="20" -s raft_interface_line_spacing="1.0" -s roofing_extruder_nr="-1" -s support_extruder_nr="0" -s speed_support_interface="40.0" -s prime_tower_brim_enable="False" -s raft_surface_fan_speed="0" -s jerk_skirt_brim="20" -s jerk_wall="20" -s jerk_infill="20" -s skin_material_flow="100" -s bridge_skin_speed_2="15.0" -s support_z_distance="0.1" -s travel_compensate_overlapping_walls_enabled="True" -s top_layers="6" -s skirt_brim_minimal_length="250" -s switch_extruder_retraction_amount="16" -s bottom_skin_preshrink="0.8" -s cross_support_density_image="" -s wireframe_flow_connection="100" -s support_roof_enable="False" -s gradual_support_infill_steps="0" -s mold_angle="40" -s wipe_hop_enable="True" -s small_feature_speed_factor="50" -s wall_0_wipe_dist="0.2" -s wipe_retraction_extra_prime_amount="0" -s skin_angles="[ ]" -s material_flush_purge_length="60" -s center_object="False" -s skin_line_width="0.4" -s switch_extruder_retraction_speed="20" -s extruder_prime_pos_z="0" -s support_conical_min_width="5.0" -s retraction_prime_speed="25" -s extruder_prime_pos_x="0" -s raft_surface_line_width="0.4" -s acceleration_travel_layer_0="5000.0" -s mold_roof_height="0.5" -s machine_max_acceleration_z="100" -s acceleration_wall_0="3000" -s raft_speed="30.0" -s support_infill_rate="15" -s adhesion_type="skirt" -s raft_base_line_width="0.8" -s speed="0" -s wall_thickness="0.8" -s machine_height="200" -s min_infill_area="0" -s mesh_position_z="0" -s wireframe_flow_flat="100" -s magic_fuzzy_skin_enabled="False" -s retraction_hop_only_when_collides="False" -s speed_z_hop="10" -s wall_overhang_angle="90" -s z_seam_relative="False" -s support_interface_skip_height="0.3" -s brim_width="8.0" -s speed_support="60" -s skin_no_small_gaps_heuristic="False" -s material_flow="100" -s support_mesh="False" -s retraction_hop_after_extruder_switch_height="1" -s wipe_hop_speed="100" -s infill_randomize_start_location="False" -s raft_fan_speed="0" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s support_roof_line_width="0.6" -s spaghetti_max_infill_angle="10" -s jerk_wall_x="20" -s material_diameter="2.85" -s skin_outline_count="1" -s retraction_enable="True" -s speed_wall_0="30.0" -s support_connect_zigzags="True" -s wipe_pause="0" -s wireframe_flow="100" -s support_bottom_extruder_nr="0" -s jerk_travel_layer_0="30.0" -s support_tree_angle="40" -s support_bottom_stair_step_height="0.3" -s connect_skin_polygons="False" -s draft_shield_height_limitation="full" -s machine_max_jerk_e="5.0" -s meshfix="0" -s outer_inset_first="False" -s adhesion_extruder_nr="0" -s machine_max_feedrate_x="299792458000" -s raft_base_speed="22.5" -s support_offset="0" -s acceleration_topbottom="3000" -s slicing_tolerance="middle" -s machine_max_acceleration_x="9000" -s wall_0_material_flow="100" -s support_brim_line_count="20" -s raft_surface_acceleration="3000" -s support_roof_line_distance="0.6" -s support_tree_branch_diameter="2" -s support_tree_enable="False" -s support_roof_density="100" -s draft_shield_height="10" -s bridge_skin_density="100" -s bridge_wall_coast="100" -s material_print_temperature="210" -s support_extruder_nr_layer_0="0" -s speed_support_bottom="40.0" -s material_break_preparation_retracted_position="-16" -s xy_offset="0" -s carve_multiple_volumes="False" -s skin_overlap_mm="0.02" -s support_roof_offset="0.0" -s wireframe_top_delay="0" -s speed_support_roof="40.0" -s ironing_pattern="zigzag" -s jerk_layer_0="20" -s layer_height_0="0.2" -s bridge_skin_material_flow_3="110" -s speed_infill="60" -s support_roof_height="1" -s retraction_speed="25" -s speed_equalize_flow_enabled="False" -s skirt_brim_material_flow="100" -s build_volume_temperature="28" -s machine_min_cool_heat_time_window="50.0" -s default_material_print_temperature="210" -s wireframe_fall_down="0.5" -s support_interface_extruder_nr="0" -s spaghetti_infill_extra_volume="0" -s infill_pattern="grid" -s resolution="0" -s machine_show_variants="False" -s machine_max_acceleration_y="9000" -s wipe_retraction_speed="5" -s cross_infill_pocket_size="4.0" -s material_break_preparation_speed="2" -s meshfix_union_all="True" -s support_fan_enable="False" -s top_thickness="0.8" -s travel_compensate_overlapping_walls_0_enabled="True" -s infill_angles="[ ]" -s raft_interface_jerk="20" -s wireframe_printspeed="5" -s minimum_interface_area="1.0" -s gradual_infill_steps="0" -s adaptive_layer_height_enabled="False" -s support_tower_roof_angle="65" -s raft_acceleration="3000" -s wireframe_height="3" -s small_hole_max_size="0" -s raft_base_line_spacing="1.6" -s support_pattern="zigzag" -s wipe_hop_amount="1" -s travel_avoid_other_parts="True" -s time="23:45:18" -s meshfix_maximum_travel_resolution="0.8" -s wireframe_bottom_delay="0" -s gantry_height="55" -s top_skin_preshrink="0.8" -s extruder_prime_pos_abs="False" -s material_print_temperature_layer_0="210" -s support_interface_enable="False" -s wipe_move_distance="20" -s infill_material_flow="100" -s machine_filament_park_distance="16" -s bridge_skin_material_flow_2="100" -s support_conical_enabled="False" -s machine_nozzle_head_distance="3" -s material_print_temp_wait="True" -s wall_line_count="2" -s support_bottom_material_flow="100" -s acceleration_layer_0="3000" -s machine_start_gcode="G21 ;metric values
2020-02-27 23:45:18,780 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G90 ;absolute positioning
2020-02-27 23:45:18,782 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] M82 ;set extruder to absolute mode
2020-02-27 23:45:18,786 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] M107 ;start with the fan off
2020-02-27 23:45:18,790 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G28 X0 Y0 ;move X/Y to min endstops
2020-02-27 23:45:18,793 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G28 Z0 ;move Z to min endstops
2020-02-27 23:45:18,797 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G1 Z15.0 F9000 ;move the platform down 15mm
2020-02-27 23:45:18,800 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0 ;zero the extruded length
2020-02-27 23:45:18,803 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G1 F200 E3 ;extrude 3mm of feed stock
2020-02-27 23:45:18,807 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0 ;zero the extruded length again
2020-02-27 23:45:18,811 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G1 F9000
2020-02-27 23:45:18,815 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] ;Put printing message on LCD screen
2020-02-27 23:45:18,819 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] M117 Printing..." -s wireframe_up_half_speed="0.3" -s jerk_roofing="20" -s support_interface_material_flow="100" -s machine_max_acceleration_e="10000" -s day="Thu" -s material_bed_temperature_layer_0="60" -s multiple_mesh_overlap="0.15" -s material_crystallinity="False" -s machine_minimum_feedrate="0.0" -s machine_name="Prusa i3" -s wall_line_width_x="0.4" -s roofing_material_flow="100" -s bridge_wall_speed="15.0" -s support_tree_collision_resolution="0.2" -s support_bottom_enable="False" -s bridge_skin_speed_3="15.0" -s machine_nozzle_id="unknown" -s bridge_skin_density_2="75" -s acceleration_travel="5000" -s limit_support_retractions="True" -s support_conical_angle="30" -s support_roof_angles="[ ]" -s meshfix_keep_open_polygons="False" -s machine_nozzle_temp_enabled="True" -s gradual_infill_step_height="1.5" -s mesh_position_x="0" -s machine_disallowed_areas="[]" -s support_infill_sparse_thickness="0.15" -s jerk_support_interface="20" -s acceleration_prime_tower="3000" -s xy_offset_layer_0="0" -s machine_buildplate_type="glass" -s prime_tower_min_volume="6" -s raft_surface_layers="2" -s machine_firmware_retract="False" -s infill_overlap_mm="0.04" -s clean_between_layers="False" -s cool_fan_enabled="True" -s extruders_enabled_count="1" -s min_skin_width_for_expansion="5.510910596163089e-17" -s flow_rate_extrusion_offset_factor="100" -s infill_support_angle="40" -s switch_extruder_extra_prime_amount="0" -s cool_min_layer_time="5" -s wireframe_roof_inset="3" -s support_line_distance="2.6666666666666665" -s print_temperature="210" -s coasting_speed="90" -s speed_equalize_flow_max="150" -s bridge_fan_speed_3="0" -s bridge_skin_speed="15.0" -s mold_enabled="False" -s machine_steps_per_mm_e="1600" -s support_bottom_offset="0.0" -s machine_acceleration="4000" -s wall_0_inset="0" -s support_roof_material_flow="100" -s roofing_line_width="0.4" -s machine_heated_build_volume="False" -s support_bottom_line_width="0.6" -s prime_tower_enable="False" -s blackmagic="0" -s acceleration_support_roof="3000" -s infill_overlap="10" -s support_bottom_line_distance="0.6" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s retraction_hop_enabled="False" -s machine_feeder_wheel_diameter="10.0" -s material_anti_ooze_retracted_position="-4" -s material_bed_temperature="60" -s prime_tower_line_width="0.4" -s prime_tower_wipe_enabled="True" -s skirt_gap="3" -s bridge_fan_speed="100" -s top_bottom_thickness="0.8" -s smooth_spiralized_contours="True" -s machine_center_is_zero="False" -s infill="0" -s acceleration_wall="3000" -s jerk_topbottom="20" -s minimum_support_area="0.0" -s z_seam_type="sharpest_corner" -s raft_interface_line_width="0.8" -s material_anti_ooze_retraction_speed="5" -s machine_nozzle_cool_down_speed="2.0" -s material_flow_dependent_temperature="False" -s mesh_position_y="0" -s bottom_layers="6" -s material_bed_temp_wait="True" -s support_zag_skip_count="8" -s cutting_mesh="False" -s infill_wall_line_count="0" -s minimum_bottom_area="1.0" -s shell="0" -s machine_heat_zone_length="16" -s skirt_brim_line_width="0.4" -s machine_end_gcode="M104 S0 ;extruder heater off
2020-02-27 23:45:18,823 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] M140 S0 ;heated bed heater off (if you have it)
2020-02-27 23:45:18,826 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G91 ;relative positioning
2020-02-27 23:45:18,828 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure
2020-02-27 23:45:18,832 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
2020-02-27 23:45:18,835 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
2020-02-27 23:45:18,837 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] M84 ;steppers off
2020-02-27 23:45:18,842 - DEBUG - [Thread-19] UM.Backend.Backend._backendLog [101]: [Backend] G90 ;absolute positioning" -s wireframe_printspeed_up="5" -s print_bed_temperature="60" -s wall_x_material_flow="100" -s cool_fan_full_at_height="0.2" -s conical_overhang_angle="50" -s support_top_distance="0.1" -s support_infill_extruder_nr="0" -s fill_perimeter_gaps="everywhere" -s skin_preshrink="0.8" -s support_initial_layer_line_distance="2.6666666666666665" -s magic_fuzzy_skin_thickness="0.3" -s jerk_support_bottom="20" -s sub_div_rad_add="0.4" -s raft_interface_thickness="0.22499999999999998" -s prime_tower_flow="100" -s wall_0_extruder_nr="-1" -s retraction_hop_after_extruder_switch="True" -s brim_outside_only="True" -s initial_bottom_layers="6" -s magic_fuzzy_skin_point_dist="0.8" -s ironing_only_highest_layer="False" -s ooze_shield_dist="2" -s ironing_flow="10.0" -s infill_line_width="0.4" -s fill_outline_gaps="False" -s wireframe_flat_delay="0.1" -s line_width="0.4" -s adaptive_layer_height_threshold="0.2" -s wall_material_flow="100" -s cool_min_layer_time_fan_speed_max="10" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_enabled="False" -s support_tower_maximum_supported_diameter="3.0" -s cool_fan_speed_min="100.0" -s small_feature_max_length="0.0" -s draft_shield_dist="10" -s raft_interface_fan_speed="0" -s bridge_enable_more_layers="True" -s support_wall_count="0" -s cooling="0" -s support_infill_angles="[ ]" -s support_skip_some_zags="False" -s infill_offset_y="0" -s roofing_angles="[ ]" -s support_tree_branch_diameter_angle="5" -s filter_out_tiny_gaps="True" -s raft_surface_line_spacing="0.4" -s skirt_line_count="3" -s cool_lift_head="False" -s ooze_shield_angle="60" -s machine_nozzle_heat_up_speed="2.0" -s acceleration_support_interface="3000" -s retraction_extrusion_window="6.5" -s retraction_count_max="90" -s minimum_polygon_circumference="1.0" -s infill_line_distance="4.0" -s acceleration_wall_x="3000" -s layer_start_x="0.0" -s support_interface_angles="[ ]" -s speed_wall_x="60.0" -s machine_heated_bed="True" -s machine_steps_per_mm_y="50" -s jerk_travel="30" -s material_break_preparation_temperature="210" -s jerk_wall_0="20" -s speed_layer_0="30.0" -s nozzle_disallowed_areas="[]" -s support_angle="50" -s jerk_prime_tower="20" -s top_bottom_pattern_0="lines" -s support_roof_extruder_nr="0" -s raft_smoothing="5" -s wall_min_flow="0" -s travel_speed="120" -s optimize_wall_printing_order="False" -s material_break_temperature="50" -s support_tower_diameter="3.0" -s speed_wall="30.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s travel="0" -s wireframe_printspeed_bottom="5" -s ooze_shield_enabled="False" -s coasting_enable="False" -s wipe_retraction_prime_speed="25" -s infill_sparse_thickness="0.15" -s support_brim_width="8.0" -s support_tree_wall_thickness="0.4" -s retraction_combing_max_distance="0" -s material_bed_temp_prepend="True" -s support="0" -s infill_wipe_dist="0.1" -s spaghetti_max_height="2.0" -s speed_topbottom="30.0" -s magic_spiralize="False" -s material_maximum_park_duration="300" -s support_bottom_density="100" -s top_bottom_extruder_nr="-1" -s support_material_flow="100" -s speed_ironing="20.0" -s machine_head_with_fans_polygon="[[-75, -18], [-75, 35], [18, 35], [18, -18]]" -s jerk_support_infill="20" -s travel_retract_before_outer_wall="False" -s switch_extruder_prime_speed="20" -s command_line_settings="0" -s support_brim_enable="False" -s material_final_print_temperature="195" -s speed_slowdown_layers="2" -s wireframe_roof_drag_along="0.8" -s material_flow_layer_0="100" -s machine_nozzle_size="0.4" -s raft_base_fan_speed="0" -s wireframe_printspeed_flat="5" -s acceleration_ironing="3000" -s machine_max_feedrate_z="299792458000" -s retraction_hop="1" -s machine_use_extruder_offset_to_offset_coords="True" -s support_interface_density="100" -s prime_tower_position_x="195.4" -s meshfix_maximum_resolution="0.5" -s machine_max_feedrate_y="299792458000" -s bridge_wall_material_flow="50" -s jerk_enabled="False" -s jerk_print_layer_0="20" -s material_print_temp_prepend="True" -s raft_base_thickness="0.24" -s default_material_bed_temperature="60" -s acceleration_print_layer_0="3000" -s wireframe_roof_outer_delay="0.2" -s top_skin_expand_distance="0.8" -s experimental="0" -s date="27-02-2020" -s wipe_repeat_count="5" -s infill_mesh="False" -s acceleration_enabled="False" -s jerk_support_roof="20" -s support_supported_skin_fan_speed="100" -s speed_print="60" -s material_standby_temperature="150" -s wipe_retraction_enable="True" -s speed_roofing="30.0" -s machine_settings="0" -s wall_extruder_nr="-1" -s acceleration_infill="3000" -s bridge_skin_density_3="80" -s machine_steps_per_mm_z="50" -s wireframe_top_jump="0.6" -s infill_mesh_order="0" -s cool_fan_speed_max="100.0" -s support_mesh_drop_down="True" -s roofing_layer_count="0" -s meshfix_union_all_remove_holes="False" -s acceleration_support_infill="3000" -s retraction_retract_speed="25" -s material_break_retracted_position="-50" -s extruder_prime_pos_y="0" -s prime_blob_enable="False" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_tip_outer_diameter="1" -s wall_line_width="0.4" -s raft_airgap="0.3" -s brim_replaces_support="True" -s cool_fan_speed_0="0" -s spaghetti_infill_enabled="False" -s support_interface_height="1" -s support_xy_distance="0.7" -s initial_layer_line_width_factor="100.0" -s support_bottom_distance="0.1" -s minimum_roof_area="1.0" -s prime_tower_size="20" -s spaghetti_infill_stepped="True" -s infill_extruder_nr="-1" -s bottom_thickness="0.8" -s layer_0_z_overlap="0.15" -s ironing_inset="0.2" -s alternate_extra_perimeter="False" -s gradual_support_infill_step_height="1" -s raft_surface_jerk="20" -s support_interface_pattern="concentric" -s infill_sparse_density="20" -s bridge_settings_enabled="False" -s wall_line_width_0="0.4" -s machine_max_jerk_xy="20.0" -s support_line_width="0.4" -s z_seam_y="200" -s support_interface_line_width="0.4" -s infill_before_walls="True" -s wipe_retraction_retract_speed="25" -s machine_endstop_positive_direction_z="True" -s speed_prime_tower="60" -s relative_extrusion="False" -s z_seam_position="back" -s anti_overhang_mesh="False" -s material_surface_energy="100" -s speed_travel="120" -s cool_fan_speed="100.0" -s support_bottom_height="1" -s material_end_of_filament_purge_speed="0.5" -s infill_multiplier="1" -s raft_interface_speed="22.5" -s wall_overhang_speed_factor="100" -s wireframe_nozzle_clearance="1" -s bridge_skin_support_threshold="50" -s jerk_print="20" -s meshfix_maximum_deviation="0.05" -s wireframe_straight_before_down="20" -s machine_head_polygon="[[-75, -18], [-75, 35], [18, 35], [18, -18]]" -s material_no_load_move_factor="0.940860215" -s remove_empty_first_layers="True" -s support_join_distance="2.0" -s support_interface_offset="0.0" -s spaghetti_inset="0.2" -s cool_fan_full_layer="2" -s alternate_carve_order="True" -s material_adhesion_tendency="10" -s meshfix_extensive_stitching="False" -s adaptive_layer_height_variation="0.1" -s travel_avoid_supports="False" -s wall_x_extruder_nr="-1" -s retraction_extra_prime_amount="0" -s jerk_ironing="20" -s layer_start_y="0.0" -s support_bottom_angles="[ ]" -s raft_base_jerk="20" -s material_guid="" -s acceleration_print="3000" -s magic_mesh_surface_mode="normal" -s speed_support_infill="60" -s machine_extruder_count="1" -s retract_at_layer_change="False" -s ironing_enabled="False" -s material_extrusion_cool_down_speed="0.7" -s material="0" -s support_roof_pattern="concentric" -s acceleration_roofing="3000" -s flow_rate_max_extrusion_offset="0" -s skin_overlap="5" -s max_extrusion_before_wipe="10" -s cross_infill_density_image="" -s support_skip_zag_per_mm="20" -s jerk_support="20" -s ironing_line_spacing="0.1" -s skirt_brim_speed="30.0" -s machine_steps_per_mm_x="50" -s support_enable="False" -s support_bottom_pattern="concentric" -s machine_depth="200" -s support_xy_overrides_z="z_overrides_xy" -s bridge_skin_material_flow="60" -s speed_travel_layer_0="60.0" -s adaptive_layer_height_variation_step="0.01" -s infill_offset_x="0" -s bridge_wall_min_length="5" -s retraction_combing="all" -s raft_jerk="20" -s support_tree_wall_count="1" -s brim_line_count="20" -s acceleration_support="3000" -s support_type="everywhere" -s small_feature_speed_factor_0="50" -s cool_min_speed="10" -s dual="0" -s material_initial_print_temperature="200" -s initial_extruder_nr="0" -s bridge_fan_speed_2="0" -s wipe_retraction_amount="1" -s support_use_towers="True" -s print_sequence="all_at_once" -s wireframe_roof_fall_down="2" -s machine_width="200" -s material_break_speed="25" -s zig_zaggify_infill="False" -s z_seam_corner="z_seam_corner_inner" -s retraction_amount="6.5" -s machine_max_jerk_z="0.4" -s wall_min_flow_retract="False" -s expand_skins_expand_distance="0.8" -s support_tree_branch_distance="1" -s prime_tower_position_y="175.4" -s raft_surface_speed="30.0" -s wireframe_printspeed_down="5" -s z_seam_x="100.0" -s layer_height="0.15" -s machine_shape="rectangular" -s infill_support_enabled="False" -s raft_surface_thickness="0.15" -s support_xy_distance_overhang="0.2" -s machine_nozzle_expansion_angle="45" -s top_bottom_pattern="lines" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s machine_max_feedrate_e="299792458000" -s travel_compensate_overlapping_walls_x_enabled="True" -s acceleration_skirt_brim="3000" -s mold_width="5" -s machine_endstop_positive_direction_x="False" -s platform_adhesion="0" -s speed_print_layer_0="30.0" -s raft_interface_acceleration="3000" -s wireframe_drag_along="0.6" -s material_shrinkage_percentage="0" -s conical_overhang_enabled="False" -s draft_shield_enabled="False" -s retraction_min_travel="0.8" -s machine_endstop_positive_direction_y="False" -s connect_infill_polygons="False" -s wipe_brush_pos_x="100" -s travel_avoid_distance="0.625" -s raft_margin="15" -s infill_enable_travel_optimization="False" -s coasting_min_volume="0.8" -s wireframe_strategy="compensate" -s coasting_volume="0.064" -s zig_zaggify_support="False" -s support_bottom_stair_step_width="5.0" -s max_skin_angle_for_expansion="90" -s material_end_of_filament_purge_length="20" -s material_flush_purge_speed="0.5" -s spaghetti_flow="20" -e0 -s raft_base_acceleration="3000" -s switch_extruder_retraction_speeds="20" -s raft_interface_line_spacing="1.4" -s wall_line_width_0="0.6" -s speed_support_interface="40.0" -s raft_surface_fan_speed="0" -s jerk_skirt_brim="20" -s jerk_wall="20" -s acceleration_roofing="3000" -s jerk_infill="20" -s skin_material_flow="100" -s bridge_skin_speed_2="20.0" -s support_z_distance="0.1" -s travel_compensate_overlapping_walls_enabled="True" -s top_layers="3" -s meshfix_maximum_resolution="0.5" -s travel_avoid_supports="False" -s skirt_brim_minimal_length="250" -s switch_extruder_retraction_amount="16" -s bottom_skin_preshrink="0.6" -s support_infill_rate="15" -s cross_support_density_image="" -s support_roof_enable="False" -s slicing_tolerance="middle" -s support_interface_density="100" -s gradual_support_infill_steps="0" -s machine_extruder_start_pos_x="0" -s mold_angle="40" -s wipe_hop_enable="True" -s small_feature_speed_factor="50" -s wall_0_wipe_dist="0.2" -s wipe_retraction_extra_prime_amount="0" -s skin_angles="[ ]" -s material_flush_purge_length="60" -s center_object="False" -s skin_line_width="0.6" -s switch_extruder_retraction_speed="20" -s extruder_prime_pos_z="0" -s machine_steps_per_mm_z="50" -s cool_min_layer_time="5" -s travel_compensate_overlapping_walls_0_enabled="True" -s z_seam_y="200" -s infill_sparse_density="20" -s support_interface_pattern="concentric" -s jerk_travel_layer_0="30.0" -s spaghetti_infill_enabled="False" -s wall_line_width="0.6" -s spaghetti_infill_extra_volume="0" -s machine_min_cool_heat_time_window="50.0" -s roofing_layer_count="0" -s bridge_wall_speed="20.0" -s roofing_material_flow="100" -s wall_line_width_x="0.6" -s raft_surface_line_width="0.6" -s machine_settings="0" -s support_bottom_enable="False" -s bridge_skin_speed_3="20.0" -s support_tree_collision_resolution="0.3" -s bridge_skin_density_3="80" -s infill_pattern="gyroid" -s resolution="0" -s wipe_hop_speed="100" -s acceleration_support_infill="3000" -s meshfix_union_all_remove_holes="False" -s support_roof_line_distance="0.6" -s support_tree_branch_diameter="2" -s meshfix_maximum_deviation="0.05" -s raft_base_fan_speed="0" -s support_roof_density="100" -s support_connect_zigzags="True" -s speed_support_bottom="40.0" -s cool_lift_head="False" -s travel_avoid_other_parts="True" -s support_pattern="zigzag" -s wipe_hop_amount="1" -s skin_overlap_mm="0.03" -s support_roof_offset="0.0" -s speed_support_roof="40.0" -s jerk_layer_0="20" -s bridge_skin_material_flow_3="110" -s speed_equalize_flow_enabled="False" -s skirt_brim_material_flow="100" -s material_print_temperature_layer_0="220" -s extruder_prime_pos_abs="False" -s top_skin_preshrink="0.6" -s machine_extruder_end_pos_abs="False" -s sub_div_rad_add="0.6" -s material_final_print_temperature="215" -s support_interface_line_width="0.6" -s skirt_brim_line_width="0.6" -s material_break_preparation_speed="2" -s meshfix_extensive_stitching="False" -s meshfix_union_all="True" -s support_fan_enable="False" -s top_thickness="0.8" -s infill_angles="[ ]" -s small_hole_max_size="0" -s support_conical_min_width="5.0" -s machine_extruder_start_pos_abs="False" -s raft_interface_jerk="20" -s speed_z_hop="10" -s minimum_interface_area="1.0" -s gradual_infill_steps="0" -s support_tower_roof_angle="65" -s raft_acceleration="3000" -s raft_base_line_spacing="1.6" -s cool_fan_speed_max="0.0" -s meshfix_maximum_travel_resolution="0.6666666666666666" -s ironing_inset="0.3" -s layer_0_z_overlap="0.15" -s prime_tower_wipe_enabled="True" -s support_use_towers="True" -s acceleration_infill="3000" -s switch_extruder_prime_speed="20" -s command_line_settings="0" -s support_brim_enable="False" -s infill_material_flow="100" -s machine_filament_park_distance="16" -s bridge_skin_material_flow_2="100" -s support_conical_enabled="False" -s machine_nozzle_head_distance="3" -s wall_line_count="1" -s support_bottom_material_flow="100" -s spaghetti_inset="0.2" -s cool_fan_full_layer="2" -s xy_offset_layer_0="0" -s support_angle="50" -s bridge_fan_speed_3="0" -s bridge_skin_speed="20.0" -s machine_steps_per_mm_y="50" -s jerk_travel="30" -s material_break_preparation_temperature="215" -s jerk_wall_0="20" -s speed_layer_0="40" -s jerk_prime_tower="20" -s raft_surface_jerk="20" -s top_bottom_thickness="0.8" -s acceleration_print_layer_0="3000" -s min_skin_width_for_expansion="2.7554552980815445e-17" -s infill_support_angle="40" -s switch_extruder_extra_prime_amount="0" -s machine_extruder_end_pos_x="0" -s ironing_flow="10.0" -s infill_line_width="0.6" -s fill_outline_gaps="False" -s clean_between_layers="False" -s cool_fan_enabled="False" -s speed_print="60" -s skin_no_small_gaps_heuristic="False" -s spaghetti_infill_stepped="True" -s minimum_roof_area="1.0" -s support_bottom_distance="0.1" -s machine_extruder_start_code="" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s acceleration_wall_0="3000" -s support_roof_height="1" -s retraction_speed="25" -s speed_infill="60" -s retraction_hop_enabled="False" -s machine_feeder_wheel_diameter="10.0" -s bottom_skin_expand_distance="0.6" -s extruder_prime_pos_y="0" -s prime_blob_enable="False" -s roofing_line_width="0.6" -s support_roof_material_flow="100" -s material_anti_ooze_retracted_position="-4" -s prime_tower_line_width="0.6" -s wall_x_material_flow="100" -s cool_fan_full_at_height="0.2" -s conical_overhang_angle="50" -s support_line_width="0.6" -s top_bottom_pattern_0="lines" -s support_top_distance="0.1" -s fill_perimeter_gaps="everywhere" -s machine_heat_zone_length="16" -s ironing_only_highest_layer="False" -s meshfix="0" -s brim_replaces_support="True" -s cool_fan_speed_0="0" -s raft_airgap="0.3" -s mold_enabled="False" -s machine_steps_per_mm_e="1600" -s support_bottom_offset="0.0" -s wall_0_inset="0" -s material_flow_dependent_temperature="False" -s mesh_position_y="0" -s z_seam_type="sharpest_corner" -s raft_interface_line_width="1.2" -s material_anti_ooze_retraction_speed="5" -s cross_infill_pocket_size="3.0" -s wipe_retraction_speed="5" -s retraction_hop_after_extruder_switch="True" -s bridge_skin_density="100" -s bridge_wall_coast="100" -s material_print_temperature="215" -s support_zag_skip_count="5" -s magic_fuzzy_skin_point_density="1.25" -s magic_fuzzy_skin_point_dist="0.8" -s retraction_count_max="90" -s bridge_enable_more_layers="True" -s support_wall_count="0" -s cooling="0" -s raft_smoothing="5" -s wall_min_flow="0" -s material_break_retracted_position="-50" -s retraction_retract_speed="25" -s machine_nozzle_heat_up_speed="2.0" -s acceleration_support_interface="3000" -s extruder_prime_pos_x="0" -s line_width="0.6" -s wall_material_flow="100" -s skirt_line_count="3" -s support_bottom_line_distance="0.6" -s infill_overlap="20" -s support_skip_some_zags="False" -s support_infill_angles="[ ]" -s multiple_mesh_overlap="0.15" -s material_crystallinity="False" -s machine_nozzle_offset_y="0" -s wipe_pause="0" -s support_tower_maximum_supported_diameter="3.0" -s cool_fan_speed_min="0.0" -s retraction_extrusion_window="6.5" -s layer_start_x="0.0" -s support_interface_angles="[ ]" -s speed_wall_x="40" -s default_material_print_temperature="200" -s coasting_enable="False" -s wipe_retraction_prime_speed="25" -s wipe_retraction_retract_speed="25" -s infill_before_walls="True" -s acceleration_travel="5000" -s limit_support_retractions="True" -s support_conical_angle="30" -s material_break_speed="25" -s material_flow="100" -s cool_min_layer_time_fan_speed_max="10" -s machine_extruder_cooling_fan_number="0" -s speed_wall="30.0" -s speed_wall_0="40" -s support_interface_height="1" -s initial_layer_line_width_factor="100.0" -s support_xy_distance="0.7" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s travel="0" -s z_seam_position="back" -s skin_preshrink="0.6" -s support_interface_enable="False" -s wipe_move_distance="20" -s mesh_position_x="0" -s infill_sparse_thickness="0.15" -s support_brim_width="8.0" -s support_tree_wall_thickness="0.6" -s support_bottom_pattern="concentric" -s support_bottom_line_width="0.6" -s machine_nozzle_tip_outer_diameter="1" -s retraction_combing_max_distance="0" -s support="0" -s support_bottom_stair_step_height="0.3" -s infill_wipe_dist="0.15" -s support_material_flow="100" -s speed_ironing="26.666666666666668" -s infill="0" -s support_bottom_density="100" -s material_maximum_park_duration="300" -s support_brim_line_count="14" -s acceleration_wall="3000" -s jerk_topbottom="20" -s minimum_support_area="0.0" -s jerk_support_infill="20" -s acceleration_ironing="3000" -s bottom_thickness="0.8" -s retraction_hop="1" -s bridge_wall_material_flow="50" -s jerk_print_layer_0="20" -s raft_base_thickness="0.24" -s material_flow_layer_0="100" -s machine_nozzle_size="0.4" -s wipe_repeat_count="5" -s bottom_layers="3" -s jerk_roofing="20" -s support_interface_material_flow="100" -s magic_fuzzy_skin_thickness="0.3" -s jerk_support_bottom="20" -s support_initial_layer_line_distance="4.0" -s machine_nozzle_cool_down_speed="2.0" -s machine_nozzle_offset_x="0" -s infill_overlap_mm="0.12" -s outer_inset_first="False" -s roofing_angles="[ ]" -s infill_offset_y="0" -s acceleration_wall_x="3000" -s support_infill_sparse_thickness="0.15" -s jerk_support_interface="20" -s acceleration_prime_tower="3000" -s shell="0" -s infill_wall_line_count="0" -s minimum_bottom_area="1.0" -s ironing_pattern="zigzag" -s conical_overhang_enabled="False" -s top_skin_expand_distance="0.6" -s experimental="0" -s brim_width="8.0" -s speed_support="60" -s machine_endstop_positive_direction_z="True" -s speed_prime_tower="60" -s material_surface_energy="100" -s speed_travel="80" -s cool_fan_speed="0.0" -s support_line_distance="4.0" -s z_seam_corner="z_seam_corner_inner" -s retraction_amount="6.5" -s machine_nozzle_id="unknown" -s machine_extruder_start_pos_y="0" -s bridge_skin_density_2="75" -s wall_overhang_speed_factor="100" -s material_no_load_move_factor="0.940860215" -s jerk_wall_x="20" -s support_tower_diameter="3.0" -s support_join_distance="2.0" -s support_interface_offset="0.0" -s jerk_support_roof="20" -s support_supported_skin_fan_speed="100" -s retraction_extra_prime_amount="0" -s jerk_ironing="20" -s skin_outline_count="1" -s retraction_enable="True" -s raft_base_jerk="20" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s acceleration_print="3000" -s wall_0_material_flow="100" -s magic_mesh_surface_mode="normal" -s speed_support_infill="60" -s retract_at_layer_change="False" -s ironing_enabled="False" -s material_extrusion_cool_down_speed="0.7" -s material="0" -s support_roof_pattern="concentric" -s skin_overlap="5" -s max_extrusion_before_wipe="10" -s cross_infill_density_image="" -s support_skip_zag_per_mm="20" -s support_tree_branch_diameter_angle="5" -s raft_surface_line_spacing="0.6" -s filter_out_tiny_gaps="True" -s jerk_support="20" -s ironing_line_spacing="0.1" -s skirt_brim_speed="40" -s machine_steps_per_mm_x="50" -s cool_min_speed="10" -s dual="0" -s material_initial_print_temperature="215" -s support_bottom_angles="[ ]" -s layer_start_y="0.0" -s prime_tower_min_volume="6" -s raft_surface_layers="2" -s support_xy_overrides_z="z_overrides_xy" -s material_adhesion_tendency="0" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s raft_jerk="20" -s support_tree_wall_count="1" -s brim_line_count="14" -s acceleration_support="3000" -s small_feature_speed_factor_0="50" -s bridge_fan_speed_2="0" -s wipe_retraction_amount="1" -s extruder_nr="0" -s machine_extruder_end_pos_y="0" -s zig_zaggify_infill="False" -s wall_min_flow_retract="False" -s expand_skins_expand_distance="0.6" -s support_tree_branch_distance="1" -s raft_surface_speed="30.0" -s z_seam_x="100.0" -s raft_base_line_width="0.8" -s infill_support_enabled="False" -s raft_surface_thickness="0.15" -s support_xy_distance_overhang="0.2" -s top_bottom_pattern="lines" -s bridge_skin_support_threshold="50" -s jerk_print="20" -s acceleration_support_bottom="3000" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s acceleration_skirt_brim="3000" -s infill_randomize_start_location="False" -s mold_width="5" -s machine_endstop_positive_direction_x="False" -s platform_adhesion="0" -s speed_print_layer_0="40" -s raft_interface_acceleration="3000" -s xy_offset="0" -s material_break_preparation_retracted_position="-16" -s machine_extruder_end_code="" -s material_shrinkage_percentage="0" -s infill_line_distance="3.0" -s retraction_min_travel="1.2" -s machine_endstop_positive_direction_y="False" -s connect_infill_polygons="False" -s wipe_brush_pos_x="100" -s raft_interface_fan_speed="0" -s small_feature_max_length="0.0" -s coasting_speed="90" -s speed_equalize_flow_max="150" -s gradual_support_infill_step_height="1" -s alternate_extra_perimeter="False" -s gradual_infill_step_height="1.5" -s machine_nozzle_temp_enabled="True" -s travel_avoid_distance="0.625" -s raft_margin="15" -s infill_enable_travel_optimization="False" -s coasting_min_volume="0.8" -s coasting_volume="0.064" -s zig_zaggify_support="False" -s support_bottom_stair_step_width="5.0" -s max_skin_angle_for_expansion="90" -s material_end_of_filament_purge_length="20" -s material_flush_purge_speed="0.5" -s spaghetti_flow="20" -s raft_surface_acceleration="3000" -s acceleration_topbottom="3000" -s material_end_of_filament_purge_speed="0.5" -s support_bottom_height="1" -s prime_tower_flow="100" -s raft_interface_thickness="0.22499999999999998" -s raft_interface_speed="22.5" -s infill_multiplier="1" -s connect_skin_polygons="False" -s support_tree_angle="40" -s support_offset="0" -s raft_base_speed="22.5" -s material_diameter="1.75" -s speed_topbottom="40.0" -s spaghetti_max_height="2.0" -s spaghetti_max_infill_angle="10" -s support_roof_line_width="0.6" -s raft_fan_speed="0" -s initial_bottom_layers="3" -s brim_outside_only="True" -s retraction_hop_after_extruder_switch_height="1" -s support_interface_skip_height="0.3" -s acceleration_layer_0="3000" -s z_seam_relative="False" -s wall_overhang_angle="90" -s wipe_retraction_enable="True" -s speed_roofing="40.0" -s material_standby_temperature="175" -s retraction_hop_only_when_collides="False" -s material_break_temperature="50" -s optimize_wall_printing_order="False" -s mesh_position_z="0" -s wall_thickness="0.8" -s min_infill_area="0" -s speed="0" -s meshfix_keep_open_polygons="False" -s support_roof_angles="[ ]" -s raft_speed="30.0" -s bridge_fan_speed="100" -s skirt_gap="3" -s mold_roof_height="0.5" -s acceleration_travel_layer_0="5000.0" -s acceleration_support_roof="3000" -s blackmagic="0" -s speed_travel_layer_0="53.333333333333336" -s bridge_skin_material_flow="60" -s retraction_prime_speed="25" -g -e0 -l "0" -s extruder_nr="0"
2020-02-27 23:45:19,296 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///D:/Program Files/Ultimaker Cura 4.4/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-27 23:45:19,300 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///D:/Program Files/Ultimaker Cura 4.4/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-27 23:45:19,308 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.2660126686096191 seconds
2020-02-27 23:45:19,309 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-27 23:45:19,309 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-27 23:45:19,313 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [179]: Socket state changed to Closing
2020-02-27 23:45:19,315 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [201]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-27 23:45:19,318 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closed
2020-02-27 23:45:19,319 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-27 23:45:22,156 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///D:/Program Files/Ultimaker Cura 4.4/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-27 23:45:22,165 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///D:/Program Files/Ultimaker Cura 4.4/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-27 23:45:22,168 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [369]: file:///D:/Program Files/Ultimaker Cura 4.4/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-27 23:45:22,286 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-27 23:45:23,103 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.8s
2020-02-27 23:45:24,647 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-27 23:45:24,648 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-27 23:45:24,651 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [211]: Previous socket existed. Closing that first.
2020-02-27 23:45:24,658 - WARNING - [Thread-8] UM.Decorators.deprecated_function [19]: <function GlobalStack.extruders at 0x00000211BB43ED08> is deprecated (since 4.4): Please use extruderList instead.
2020-02-27 23:45:24,684 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [171]: Socket state changed to Listening
2020-02-27 23:45:24,687 - WARNING - [Thread-8] CuraEngineBackend.StartSliceJob.run [209]: No objects suitable for one at a time found, or no correct order found
2020-02-27 23:45:24,702 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: D:\Program Files\Ultimaker Cura 4.4\CuraEngine.exe
2020-02-27 23:45:24,706 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['D:\\Program Files\\Ultimaker Cura 4.4\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-02-27 23:45:24,907 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-27 23:45:24,907 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [175]: Socket state changed to Connected
2020-02-27 23:45:24,910 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.4.1
2020-02-27 23:45:24,913 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [165]: Backend connected on port 49674
2020-02-27 23:45:24,917 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-27 23:45:24,922 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-27 23:45:24,924 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-27 23:45:24,927 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-27 23:45:24,936 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-27 23:45:24,939 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-27 23:45:24,942 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-27 23:45:24,945 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-27 23:45:24,951 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-27 23:45:24,959 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-27 23:45:24,962 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-27 23:45:24,964 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-27 23:45:24,967 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-27 23:45:24,972 - DEBUG - [Thread-22] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
mahtDFR commented 4 years ago

Can you check your machine settings, particularly 'Printhead settings'? image

You have given me an STL to use, but what would be more useful is a project file. That way I have your model and your specific printer settings. Go to File > Save... ,save a 3mf, zip it up, attach it here. Thanks

Ghostkeeper commented 4 years ago

With a normal Prusa i3 in Cura it slices normally. We haven't been able to reproduce this so far.

image

I think this is a mistake in your printer's definition file. If you modded Cura in order to have that definition file in, a project file won't be of any use either. What is the project file?

alpha8196 commented 4 years ago

sorry for the late reply, I changed the printhead setting to be the same with @mahtDFR but still has the same issue and sorry for misunderstanding what the project file means, here's the zipped .3mf

PI3_Bed_Leveling_Test.zip

mahtDFR commented 4 years ago

Thanks for the project file. It sliced fine for me (4.5), so I can't reproduce the issue. As Ghostkeeper says, perhaps your definition file has been modded somehow. You could consider resetting your configuration?

Ghostkeeper commented 4 years ago

Ah, I see what's happening. This issue reproduces in Cura 4.4 but not in Cura 4.5. We had an issue in 4.4 where one-at-a-time mode was not giving the correct collision area. That's why we couldn't reproduce it: It's been fixed in Cura 4.5.