search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.22k stars 2.08k forks source link

Build Plate temperature initial layer #7505

Closed giantshell closed 4 years ago

giantshell commented 4 years ago

Application version cura 4.5

Platform OSX 10.15.4

Printer FLSUN QQS

Reproduction steps

  1. define settings in cura
  2. slice the settings in cura
  3. Save on HD
  4. Open created file on HD and check instruction code M190 and M140

Screenshot(s) (Image showing the

Capture d’écran 2020-04-15 à 10 58 32

problem, perhaps before/after images.)

Capture d’écran 2020-04-15 à 10 59 42

Actual results The M190 instruction at the biginning of Gcode does not refer to "Build Plate temperature initial layer" parameter but to "build plate temperature" parameter

Expected results The M190 instruction at the biginning of Gcode should refer to "Build Plate temperature initial layer" parameter and M140 should refer to "build plate temperature" parameter

Project file (For slicing bugs, provide a project which clearly shows the bug, by going to File->Save. For big files you may need to use WeTransfer or similar file sharing sites.)

Log file (See https://github.com/Ultimaker/Cura#logging-issues to find the log file to upload, or copy a relevant snippet from it.)

Additional information (Extra information relevant to the issue.)

Ghostkeeper commented 4 years ago

Yeah, this was a mistake in the profile for FLSUN QQ-S that we merged in a year ago. Thanks for spotting it! I can't test this profile, but it's an obvious mistake and an easy fix so I put it in the next release myself anyway.

giantshell commented 4 years ago

Thanks, Good news ;-)

Le 22 avr. 2020 à 11:42, Ghostkeeper notifications@github.com a écrit :

Yeah, this was a mistake in the profile for FLSUN QQ-S that we merged in a year ago. Thanks for spotting it! I can't test this profile, but it's an obvious mistake and an easy fix so I put it in the next release myself anyway.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Ultimaker/Cura/issues/7505#issuecomment-617671059, or unsubscribe https://github.com/notifications/unsubscribe-auth/APGCFCFTQSE3GCVTPF2JHGLRN23XXANCNFSM4MIM742A.

giantshell commented 4 years ago

Hi,

I’ve checked in V4.6 of cura and problem remains.

Any information ?

Thanks.

Ben

Le 22 avr. 2020 à 12:17, benoit guichard giantshell@hotmail.fr a écrit :

Thanks, Good news ;-)

Le 22 avr. 2020 à 11:42, Ghostkeeper <notifications@github.com mailto:notifications@github.com> a écrit :

Yeah, this was a mistake in the profile for FLSUN QQ-S that we merged in a year ago. Thanks for spotting it! I can't test this profile, but it's an obvious mistake and an easy fix so I put it in the next release myself anyway.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Ultimaker/Cura/issues/7505#issuecomment-617671059, or unsubscribe https://github.com/notifications/unsubscribe-auth/APGCFCFTQSE3GCVTPF2JHGLRN23XXANCNFSM4MIM742A.

Ghostkeeper commented 4 years ago

Yeah the change was made to master, since 4.6 was released on the day before. It will be in 4.7.