search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.12k stars 2.06k forks source link

Can not set Y min or X min Using Cura 4.4.1 (Mooz 2) #8012

Closed MakerReveiws closed 4 years ago

MakerReveiws commented 4 years ago

Application version 4.4.1

Platform ubuntu 20.04.

Printer mooz 2

Reproduction steps

  1. Tried to reinstall Cura multiple time but same thing happened over and over again
  2. I contacted Ultimaker but they told me to post an issue on github.

Log file (See https://github.com/Ultimaker/Cura#logging-issues to find the log file to upload, or copy a relevant snippet from it.)

nallath commented 4 years ago

I'm sorry, what min Y or min X? Also, have you tried to do this with Cura 4.6.1?

MakerReveiws commented 4 years ago

I don’t know how to install 4.6.1. I downloaded straight from gnome software. If you can tell me how to do it on raspberry pi running Ubuntu 20.04 then I will try that way.

Ghostkeeper commented 4 years ago

The Ubuntu software repository has a build made by a maintainer in the community. It's a user-friendly way to distribute the software, but not maintained by the developers themselves. We don't know in what state it is. It could well be outdated.

You can always download the latest version here on Github or on the ultimaker.com website. 4.6.1 is here: https://github.com/Ultimaker/Cura/releases/download/4.6.1/Cura-4.6.1.AppImage

Did you mean the "X Min" and "Y Min" of the print head shape in the machine settings dialogue? Be aware that they must always be negative, since they are relative to the nozzle position. The nozzle cannot be more left than the left-hand side of the print head, unless you have quantum tunnelling filament or something. Was that what you meant?

MakerReveiws commented 4 years ago

These are the settings that I have gotten from the Dobot mooz book. I don’t know what to do. I was simply following instructions. I did not know. I will try the git hub repo. Thank You.

On Mon, Jul 6, 2020 at 5:29 AM Ghostkeeper notifications@github.com wrote:

The Ubuntu software repository has a build made by a maintainer in the community. It's a user-friendly way to distribute the software, but not maintained by the developers themselves. We don't know in what state it is. It could well be outdated.

You can always download the latest version here on Github or on the ultimaker.com website. 4.6.1 is here: https://github.com/Ultimaker/Cura/releases/download/4.6.1/Cura-4.6.1.AppImage https://github.com/Ultimaker/Cura/releases/download/4.6.1/Cura-4.6.1.AppImage

Did you mean the "X Min" and "Y Min" of the print head shape in the machine settings dialogue? Be aware that they must always be negative, since they are relative to the nozzle position. The nozzle cannot be more left than the left-hand side of the print head, unless you have quantum tunnelling filament or something. Was that what you meant?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Ultimaker/Cura/issues/8012#issuecomment-654203826, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQERV3RAQUQH6SF6HGYLOTLR2G7NZANCNFSM4ONUZMHQ.

Ghostkeeper commented 4 years ago

Those instructions are maybe outdated. In the past those text fields worked differently. Let us know if using negative values fixed your issue.

no-response[bot] commented 4 years ago

This issue has been automatically closed because there has been no response to our request for more information from the original author. With only the information that is currently in the issue, we don't have enough information to take action. Please reach out if you have or find the answers we need so that we can investigate further.