Problem between two printers

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework

GNU Lesser General Public License v3.0

6.16k stars 2.07k forks source link

Problem between two printers #8545

Closed Fabdu57 closed 4 years ago

Fabdu57 commented 4 years ago

Hello,

I have a problem... Two profiles, the first created with Ender 3 pro, the second with SOVOl SV02. Same parameters. Same values. However, support are different, and i have some problem on certain parts...

Is somebody can help me, because if it continue, i will sell SV02 to take again a creality ender 3 lol.

Thanks in advance, Fabrice

Fichier 3mf.zip

eskeyaar commented 4 years ago

These doesnt have project files, so pls upload them as project files.

Fabdu57 commented 4 years ago

on zip file you have the 3mf file. You don't arrive to upload it ?

eskeyaar commented 4 years ago

yes, those are just 3mf file, it doesnt open as project file. Save them as project not export them.

Fabdu57 commented 4 years ago

OK sorry. I will do it again tomorrow

eskeyaar commented 4 years ago

also mention what version of cura you are using.

Fabdu57 commented 4 years ago

Version is 4.7.1 New files in attachment Files.zip

Ghostkeeper commented 4 years ago

and i have some problem on certain parts...

What is the problem you're having? Is it not filling that gap? Could you fill in the issue template, specifically with what your expected behaviour is and what your actual behaviour is?

I'm getting the same result with both project files, visually:

Inspecting the g-code there are still slight differences. You say that all of the settings are the same, but there still are differences. Most importantly, the Maximum Resolution and Deviation settings are still very different which has an influence on the thicknesses of all parts and the exact coordinates of your vertices. Try setting those to be equal.

no-response[bot] commented 4 years ago

This issue has been automatically closed because there has been no response to our request for more information from the original author. With only the information that is currently in the issue, we don't have enough information to take action. Please reach out if you have or find the answers we need so that we can investigate further.