Open Devtech223 opened 3 years ago
Short answer: Please reinstall graphics card drivers.
Longer explanation: I think I can see the problem:
2020-12-06 21:34:08,063 - DEBUG - [MainThread] UM.View.GL.OpenGL.init [112]: Initialized OpenGL subsystems.
2020-12-06 21:34:08,065 - DEBUG - [MainThread] UM.View.GL.OpenGL.init [113]: OpenGL Version: 4.1.0 NVIDIA 457.51
2020-12-06 21:34:08,066 - DEBUG - [MainThread] UM.View.GL.OpenGL.init [114]: OpenGL Vendor: NVIDIA Corporation
2020-12-06 21:34:08,068 - DEBUG - [MainThread] UM.View.GL.OpenGL.init [115]: OpenGL Renderer: GeForce RTX 2060 SUPER/PCIe/SSE2
2020-12-06 21:34:08,070 - DEBUG - [MainThread] UM.View.GL.OpenGL.init [116]: GLSL Version: 4.0.0
As you can see, the OpenGL version is 4.1.0, while the GLSL version is 400. This should never happen. OpenGL version 4.1.0 is locked to GLSL 410. I've seen this in the past, and the re-installation of graphics cards drivers fixed the problem for at least one reporter (maybe more).
Crash on startup : White screen #8904 my issue was the same as this one and his known fix fixed mine and a graphics card reinstall did nothing to fix it
@Devtech223 I hadn't seen that one, thanks for pointing it out! Are your 'reproduction steps' the same as @MooM00 s?
I'm going to close the newer issue #8904 as a duplicate (keeping this one open so we can track it), but I think it's useful to at least put the workaround found in the other issue here so people don't have to play 'follow the link':
Set 'window_left' to any positive value in [general] section of %appdata%\cura\4.8\cura.cfg
Reproduction steps seem to have something to do with having 2 monitors. I use 2 monitors as well, but the primary one is on the right at the moment.
@rburema Yes my repoduction steps where the exact same as @MooMOO And I can confirm my primary monitor is my left monitor
With multiple monitors, try temporarily disabling one. If Cura starts with only a single display, then go to the General preferences in Cura and deselect the option to "Restore window position on start". Then you can reenable the second display.
Cura 4.7.1:
Possibly not relevant but there are a lot of symptoms to deal with in cura. Root cause no software testing, no QA.
Root cause no software testing, no QA.
Well, you are great at motivational speaking, so you have that going for you.
Possibly not relevant
Feel free to participate in issues, but please try to chime in where it is relevant. Yours is a very different problem than what is being discussed in this issue. See https://github.com/Ultimaker/Cura/issues/8472
Also crashes on Intel HD 2500 with OpenGL 3.1. cura 4.7 at least works on it (although without simulation)
Some additional features are supported from newer versions too:
Please keep compatibility with old HW, there is no point buying new PC only for slicing. (I wouldn't call displaying a 3D model as cutting edge application), let's think green.
Also it would be time to do CPU/memory profiling, it's getting slower and slower even on my 4core desktop, and eating 500MB RAM, with >20-30sec startup.
We know what things are supported by various OpenGL versions, there no need to tell us again. We also regularly profile Cura.
But as others have already posted before; Without adding extra information about your system, saying that the issue occurs with you is simply not helping.
I just included what OpenGL features are supported by my older Intel card, so simulation could be fixed for it.
Please find my 4.8 crash logs attached: stderr.log cura.log
If OpenGL 4.1 is not available it should fall back to OpenGL 2.0, which should be supported through backwards compatibility by your chip. Indeed you won't have the simulation view available but at least it should run and be able to see layer view data, albeit more flat and less fully-featured.
The crash dialogue indicates that there is a segfault (c0000005
) in ig4icd64.dll
which is the Intel graphics drivers. There should NEVER be a segfault in your Intel drivers. There is very little we can do to help with this, as it's a fault on Intel's side.
Other applications may not hit the same code path. There may be workarounds possible in theory to not hit the code path that is causing the segfault. But trying to work around segfaults in drivers on the users' computer is a bit like trying to throw a bottle in the ocean in the correct spot such that it lands in Hawaii by ocean currents. It's extremely unpredictable and we're basically flying blind.
Thanks for the investigation, would OpenGL 2.0 generate worse gcode?
Looks like the Windows Intel driver is buggy, I will try to upgrade it. https://dslrdashboard.info/phpBB3/viewtopic.php?t=1572
Until then I have to stick with Cura 4.7.
OpenGL does not in any way affect the gcode that is created.
With multiple monitors, try temporarily disabling one. If Cura starts with only a single display, then go to the General preferences in Cura and deselect the option to "Restore window position on start". Then you can reenable the second display.
The workaround worked for me.
This issue is still present in 4.8.0.
What finally worked for me on 4.8 was to click on the Learn More of the last intro slide (before the crash) and change the setting to not share info with Cura. Changing the setting and accepting the change allowed the installation to completed. Changing to a single monitor/powering off/disconnecting, etc. did not make a difference for me as it did for some.
Good luck!
It's weird that for some people changing that preference apparently helps get them through the start-up wizard, especially since the anonymous slice information is only sent when saving the g-code or sending it to the printer. The preference is not used in the start-up wizard at all. You can search the source code here for usages of the info/send_slice_info
preference to find where it's used.
I was having this same issue intermittently on macOS on my 2017 15-inch Macbook Pro, also seems related to Graphics Drivers. None of the above workarounds fixed it for me but I seem to have figured something out. For context, my MBP has Intel HD 630 graphics and a Radeon Pro 560 4 GB.
Given that it worked intermittently I took a close reading of the logs and found out that when it didn't work it used my Intel graphics:
2021-03-29 15:44:01,292 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems.
2021-03-29 15:44:01,296 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1 INTEL-16.1.11
2021-03-29 15:44:01,300 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel Inc.
2021-03-29 15:44:01,304 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) HD Graphics 630
2021-03-29 15:44:01,309 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0
and when it did work it used my Radeon card:
2021-03-29 15:44:22,009 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems.
2021-03-29 15:44:22,012 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1 ATI-4.2.15
2021-03-29 15:44:22,014 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: ATI Technologies Inc.
2021-03-29 15:44:22,017 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: AMD Radeon Pro 560 OpenGL Engine
2021-03-29 15:44:22,021 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0
What's interesting is now after this debugging session constantly starting/stopping Cura with the different GPUs I am no longer able to repro the issue at all, it starts fine on both. I didn't go messing around in any settings so I'm not sure why that would be.
One can force their mac to always use discrete graphics (if available) by unchecking Automatic Graphics Switching in the power settings. For more granular control there's also gfxCardStatus which lets you force integrated or discrete, and shows why it picked one or the other.
I'm happy to provide full logs or anything else needed for more clues.
Hope this helps!
With multiple monitors, try temporarily disabling one. If Cura starts with only a single display, then go to the General preferences in Cura and deselect the option to "Restore window position on start". Then you can reenable the second display.
This worked for me in 4.9.0. Thanks @fieldOfView!
One can force their mac to always use discrete graphics (if available) by unchecking Automatic Graphics Switching in the power settings. For more granular control there's also gfxCardStatus which lets you force integrated or discrete, and shows why it picked one or the other.
Thank you, I got this issue after upgrading from macOS 11.1 to 11.3.1! I have a 2018 MacBook Pro 15" with a Intel UHD630 & Radeon Pro 560X
@Devtech223 I hadn't seen that one, thanks for pointing it out! Are your 'reproduction steps' the same as @MooM00 s?
I'm going to close the newer issue #8904 as a duplicate (keeping this one open so we can track it), but I think it's useful to at least put the workaround found in the other issue here so people don't have to play 'follow the link':
Set 'window_left' to any positive value in [general] section of %appdata%\cura\4.8\cura.cfg
Reproduction steps seem to have something to do with having 2 monitors. I use 2 monitors as well, but the primary one is on the right at the moment.
I can confirm it was due to two monitors.
We've made some changes to 4.10 that might affect this issue. A number of people have reported that issues with multiple monitors have been resolved in 4.10
Had the same issue. I have an i7 late 2014 Mac mini with Dual Thunderbolt Displays along with an EGPU attached. Somewhere in some update using the EGPU to render vs the internal gpu causes the white screen. Disabling "prefer EGPU" restored Cura back to normal. Cura upgrades did not resolve the issue. I used to render using my egpu previously with no issues.
Hey, I encounter Cura crashing on me too, tried to disable screens and launch it but didn't help. Deleted the cura.cfg and that didn't help either.
Here's the log:
2022-05-13 23:34:53,229 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [97]: Adding QT5 plugin path: C:\Program Files\Ultimaker Cura 5.0.0\PyQt6\plugins
2022-05-13 23:34:53,229 - DEBUG - [MainThread] UM.Application.initialize [161]: Initializing Ultimaker Cura
2022-05-13 23:34:53,229 - DEBUG - [MainThread] UM.Application.initialize [162]: App Version 5.0.0-beta+1
2022-05-13 23:34:53,230 - DEBUG - [MainThread] UM.Application.initialize [163]: Api Version 8.0.0
2022-05-13 23:34:53,230 - DEBUG - [MainThread] UM.Application.initialize [164]: Build type None
2022-05-13 23:34:53,230 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\uranium must be a folder.
2022-05-13 23:34:53,230 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib64\uranium must be a folder.
2022-05-13 23:34:53,230 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib32\uranium must be a folder.
2022-05-13 23:34:53,230 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Ultimaker Cura 5.0.0\plugins must be a folder.
2022-05-13 23:34:53,231 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\uranium\plugins must be a folder.
2022-05-13 23:34:53,231 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\Resources\cura\plugins must be a folder.
2022-05-13 23:34:53,231 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [447]: Initializing storage paths
2022-05-13 23:34:53,231 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [457]: Config storage path is C:\Users\Jan\AppData\Roaming\cura\5.0
2022-05-13 23:34:53,231 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [465]: Data storage path is C:\Users\Jan\AppData\Roaming\cura\5.0
2022-05-13 23:34:53,231 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [477]: Cache storage path is C:\Users\Jan\AppData\Local\cura\5.0\cache
2022-05-13 23:34:53,232 - INFO - [MainThread] UM.Qt.QtApplication.initialize [149]: Preferences file not found, ignore and use default language 'en_US'
2022-05-13 23:34:53,232 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\bundled_packages\uranium.json
2022-05-13 23:34:53,232 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.0.0\UM\..\share\uranium\resources\bundled_packages\uranium.json
2022-05-13 23:34:53,232 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.0.0\cura\..\share\cura\resources\bundled_packages\cura.json
2022-05-13 23:34:53,232 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\bundled_packages\cura.json
2022-05-13 23:34:53,232 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [124]: Trying OpenGL context 4.1...
2022-05-13 23:34:53,232 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [132]: Yay, we got at least OpenGL 4.1 core: 4.1 Core profile
2022-05-13 23:34:53,233 - DEBUG - [MainThread] UM.Qt.QtApplication.initialize [180]: Detected most suitable OpenGL context version: 4.1 Core profile
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.Qt.QtApplication.initialize [187]: Initializing job queue ...
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.Qt.QtApplication.initialize [191]: Initializing version upgrade manager ...
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\bundled_packages\uranium.json
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.0.0\UM\..\share\uranium\resources\bundled_packages\uranium.json
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.0.0\cura\..\share\cura\resources\bundled_packages\cura.json
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\bundled_packages\cura.json
2022-05-13 23:34:53,233 - INFO - [MainThread] UM.PackageManager._loadManagementData [203]: User package management file C:\Users\Jan\AppData\Roaming\cura\5.0\packages.json doesn't exist, do nothing
2022-05-13 23:34:53,234 - INFO - [MainThread] UM.PackageManager._removeAllScheduledPackages [280]: Attempting to remove the following scheduled packages: -
2022-05-13 23:34:53,234 - INFO - [MainThread] UM.PluginRegistry.initializeBeforePluginsAreLoaded [121]: Loading plugin configuration file 'C:\Users\Jan\AppData\Roaming\cura\5.0\plugins.json'
2022-05-13 23:34:53,234 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [202]: Plugin location C:\Program Files\lib\cura must be a folder.
2022-05-13 23:34:53,235 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin FileLogger
2022-05-13 23:34:53,244 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin LocalContainerProvider
2022-05-13 23:34:53,252 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin LocalFileOutputDevice
2022-05-13 23:34:53,261 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin CameraTool
2022-05-13 23:34:53,269 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin MirrorTool
2022-05-13 23:34:53,279 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin RotateTool
2022-05-13 23:34:53,289 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin ScaleTool
2022-05-13 23:34:53,295 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin SelectionTool
2022-05-13 23:34:53,304 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin TranslateTool
2022-05-13 23:34:53,321 - INFO - [MainThread] UpdateChecker.UpdateChecker.checkNewVersion [68]: Checking for new version
2022-05-13 23:34:53,323 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin UpdateChecker
2022-05-13 23:34:53,396 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin SimpleView
2022-05-13 23:34:53,419 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin 3MFReader
2022-05-13 23:34:53,429 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin 3MFWriter
2022-05-13 23:34:53,618 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin AMFReader
2022-05-13 23:34:54,592 - INFO - [MainThread] UpdateChecker.UpdateChecker._handleLatestUpdate [166]: Found a new version of the software. Spawning message
2022-05-13 23:34:54,604 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin CuraDrive
2022-05-13 23:34:54,731 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.__init__ [96]: Found CuraEngine at: C:\Program Files\Ultimaker Cura 5.0.0\CuraEngine.exe
2022-05-13 23:34:54,733 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin CuraEngineBackend
2022-05-13 23:34:54,737 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [216]: Socket was unable to bind to port, increasing port number to 49675
2022-05-13 23:34:54,737 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [231]: Previous socket existed. Closing that first.
2022-05-13 23:34:54,738 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [354]: Attempting to kill the engine process
2022-05-13 23:34:54,739 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [231]: Previous socket existed. Closing that first.
2022-05-13 23:34:54,747 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin CuraProfileReader
2022-05-13 23:34:54,747 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Listening
2022-05-13 23:34:54,750 - INFO - [MainThread] UM.Backend.Backend.startEngine [91]: Started engine process: C:\Program Files\Ultimaker Cura 5.0.0\CuraEngine.exe
2022-05-13 23:34:54,751 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [111]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 5.0.0\\CuraEngine.exe', 'connect', '127.0.0.1:49675', '']
2022-05-13 23:34:54,759 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin CuraProfileWriter
2022-05-13 23:34:54,793 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin DigitalLibrary
2022-05-13 23:34:54,806 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin FirmwareUpdateChecker
2022-05-13 23:34:54,818 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin FirmwareUpdater
2022-05-13 23:34:54,829 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin GCodeGzReader
2022-05-13 23:34:54,834 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend]
2022-05-13 23:34:54,835 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] Cura_SteamEngine version 5.0.0-beta+1
2022-05-13 23:34:54,835 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] Copyright (C) 2021 Ultimaker
2022-05-13 23:34:54,836 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend]
2022-05-13 23:34:54,836 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] This program is free software: you can redistribute it and/or modify
2022-05-13 23:34:54,837 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] it under the terms of the GNU Affero General Public License as published by
2022-05-13 23:34:54,837 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] the Free Software Foundation, either version 3 of the License, or
2022-05-13 23:34:54,838 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] (at your option) any later version.
2022-05-13 23:34:54,838 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend]
2022-05-13 23:34:54,839 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] This program is distributed in the hope that it will be useful,
2022-05-13 23:34:54,839 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2022-05-13 23:34:54,839 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2022-05-13 23:34:54,840 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] GNU Affero General Public License for more details.
2022-05-13 23:34:54,840 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend]
2022-05-13 23:34:54,841 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] You should have received a copy of the GNU Affero General Public License
2022-05-13 23:34:54,841 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [111]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2022-05-13 23:34:54,842 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin GCodeGzWriter
2022-05-13 23:34:54,842 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [192]: Socket state changed to Connected
2022-05-13 23:34:54,843 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [181]: Backend connected on port 49675
2022-05-13 23:34:54,853 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin GCodeProfileReader
2022-05-13 23:34:54,871 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin GCodeReader
2022-05-13 23:34:54,881 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin GCodeWriter
2022-05-13 23:34:54,895 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin ImageReader
2022-05-13 23:34:54,905 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin LegacyProfileReader
2022-05-13 23:34:54,916 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin MachineSettingsAction
2022-05-13 23:34:54,950 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from
2022-05-13 23:34:54,951 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.0.0/packages/package-updates?installed_packages=PolyWoodPLA:1.0.1&installed_packages=IMADE3DJellyBOXPETG:1.0.1&installed_packages=PolyPlusPLA:1.0.1&installed_packages=PolyMaxPLA:1.0.1&installed_packages=IMADE3DJellyBOXPLA:1.0.1&installed_packages=OctofiberPLA:1.0.1&installed_packages=VertexDeltaTPU:1.4.0&installed_packages=PolyFlexPLA:1.0.1&installed_packages=UltimakerTPU:1.4.0&installed_packages=UltimakerCPE:1.4.0&installed_packages=UltimakerPC:1.4.0&installed_packages=GenericGFFCPE:1.4.0&installed_packages=GenericPP:1.4.0&installed_packages=UltimakerABS:1.4.0&installed_packages=GenericBAM:1.4.0&installed_packages=VertexDeltaPLA:1.4.0&installed_packages=GenericHIPS:1.4.0&installed_packages=GenericPETG:1.4.0&installed_packages=GenericNylon:1.4.0&installed_packages=FiberlogyHDPLA:1.0.1&installed_packages=UltimakerCPEP:1.4.0&installed_packages=GenericPVA:1.4.0&installed_packages=GenericTPU:1.4.0&installed_packages=Filo3DPLA:1.0.1&installed_packages=GenericPC:1.4.0&installed_packages=UltimakerPVA:1.4.0&installed_packages=VertexDeltaABS:1.4.0&installed_packages=FABtotumABS:1.4.0&installed_packages=GenericCPEPlus:1.4.0&installed_packages=UltimakerPP:1.4.0&installed_packages=UltimakerNylon:1.4.0&installed_packages=FABtotumPLA:1.4.0&installed_packages=GenericCPE:1.4.0&installed_packages=FABtotumNylon:1.4.0&installed_packages=VertexDeltaPET:1.4.0&installed_packages=GenericPLA:1.4.0&installed_packages=GenericCFFCPE:1.4.0&installed_packages=GenericABS:1.4.0&installed_packages=GenericCFFPA:1.4.0&installed_packages=FABtotumTPU:1.4.0&installed_packages=UltimakerPLA:1.4.0&installed_packages=UltimakerBAM:1.4.0&installed_packages=DagomaChromatikPLA:1.0.1&installed_packages=GenericToughPLA:1.4.0&installed_packages=GenericGFFPA:1.4.0&installed_packages=UltimakerTPLA:1.4.0&installed_packages=CuraProfileWriter:1.0.1&installed_packages=SimulationView:1.0.1&installed_packages=MirrorTool:1.0.1&installed_packages=X3DReader:1.0.1&installed_packages=GCodeGzWriter:1.0.1&installed_packages=VersionUpgrade411to412:1.0.0&installed_packages=GCodeWriter:1.0.1&installed_packages=STLWriter:1.0.1&installed_packages=FileLogger:1.0.1&installed_packages=VersionUpgrade49to410:1.0.0&installed_packages=VersionUpgrade35to40:1.0.0&installed_packages=LocalFileOutputDevice:1.0.1&installed_packages=FirmwareUpdater:1.0.1&installed_packages=VersionUpgrade40to41:1.0.1&installed_packages=VersionUpgrade30to31:1.0.1&installed_packages=CuraDrive:1.2.0&installed_packages=AMFReader:1.0.0&installed_packages=VersionUpgrade26to27:1.0.1&installed_packages=VersionUpgrade462to47:1.0.0&installed_packages=RotateTool:1.0.1&installed_packages=VersionUpgrade45to46:1.0.0&installed_packages=VersionUpgrade32to33:1.0.1&installed_packages=ScaleTool:1.0.1&installed_packages=OBJReader:1.0.1&installed_packages=VersionUpgrade25to26:1.0.1&installed_packages=LegacyProfileReader:1.0.1&installed_packages=LocalContainerProvider:1.0.1&installed_packages=OBJWriter:1.0.1&installed_packages=GCodeReader:1.0.1&installed_packages=TrimeshReader:1.0.0&installed_packages=VersionUpgrade460to462:1.0.0&installed_packages=SentryLogger:1.0.0&installed_packages=USBPrinting:1.0.2&installed_packages=VersionUpgrade27to30:1.0.1&installed_packages=MonitorStage:1.0.1&installed_packages=VersionUpgrade33to34:1.0.1&installed_packages=CameraTool:1.0.1&installed_packages=UM3NetworkPrinting:1.0.1&installed_packages=VersionUpgrade47to48:1.0.0&installed_packages=CuraProfileReader:1.0.1&installed_packages=VersionUpgrade43to44:1.0.0&installed_packages=STLReader:1.0.1&installed_packages=PostProcessingPlugin:2.2.1&installed_packages=3MFWriter:1.0.1&installed_packages=PrepareStage:1.0.1&installed_packages=SolidView:1.0.1&installed_packages=Marketplace:1.0.0&installed_packages=GCodeGzReader:1.0.1&installed_packages=PreviewStage:1.0.1&installed_packages=TranslateTool:1.0.1&installed_packages=CuraEngineBackend:1.0.1&installed_packages=ImageReader:1.0.1&installed_packages=MachineSettingsAction:1.0.1&installed_packages=UltimakerMachineActions:1.0.1&installed_packages=SliceInfoPlugin:1.0.1&installed_packages=XMLMaterialProfile:1.0.1&installed_packages=VersionUpgrade42to43:1.0.0&installed_packages=GCodeProfileReader:1.0.1&installed_packages=VersionUpgrade22to24:1.0.1&installed_packages=SimpleView:1.0.1&installed_packages=VersionUpgrade44to45:1.0.0&installed_packages=ModelChecker:1.0.1&installed_packages=UFPWriter:1.0.1&installed_packages=SupportEraser:1.0.1&installed_packages=ConsoleLogger:1.0.1&installed_packages=SelectionTool:1.0.1&installed_packages=DigitalLibrary:1.1.0&installed_packages=VersionUpgrade48to49:1.0.0&installed_packages=PerObjectSettingsTool:1.0.1&installed_packages=FirmwareUpdateChecker:1.0.1&installed_packages=3MFReader:1.0.1&installed_packages=RemovableDriveOutputDevice:1.0.1&installed_packages=VersionUpgrade41to42:1.0.0&installed_packages=VersionUpgrade21to22:1.0.1&installed_packages=UpdateChecker:1.0.1&installed_packages=VersionUpgrade34to35:1.0.1&installed_packages=XRayView:1.0.1&installed_packages=UFPReader:1.0.0
2022-05-13 23:34:54,954 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin Marketplace
2022-05-13 23:34:54,964 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin ModelChecker
2022-05-13 23:34:54,971 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin MonitorStage
2022-05-13 23:34:54,981 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin PerObjectSettingsTool
2022-05-13 23:34:54,989 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin PostProcessingPlugin
2022-05-13 23:34:54,998 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin PrepareStage
2022-05-13 23:34:55,006 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin PreviewStage
2022-05-13 23:34:55,020 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin RemovableDriveOutputDevice
2022-05-13 23:34:55,040 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin SimulationView
2022-05-13 23:34:55,050 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin SliceInfoPlugin
2022-05-13 23:34:55,062 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin SolidView
2022-05-13 23:34:55,070 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin SupportEraser
2022-05-13 23:34:55,078 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin TrimeshReader
2022-05-13 23:34:55,087 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin UFPReader
2022-05-13 23:34:55,097 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin UFPWriter
2022-05-13 23:34:55,107 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin UltimakerMachineActions
2022-05-13 23:34:55,181 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin UM3NetworkPrinting
2022-05-13 23:34:55,201 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin USBPrinting
2022-05-13 23:34:55,215 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade21to22
2022-05-13 23:34:55,222 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade22to24
2022-05-13 23:34:55,231 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade25to26
2022-05-13 23:34:55,239 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade26to27
2022-05-13 23:34:55,246 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade27to30
2022-05-13 23:34:55,253 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade30to31
2022-05-13 23:34:55,259 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade32to33
2022-05-13 23:34:55,266 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade33to34
2022-05-13 23:34:55,272 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade34to35
2022-05-13 23:34:55,279 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade35to40
2022-05-13 23:34:55,285 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade40to41
2022-05-13 23:34:55,290 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade411to412
2022-05-13 23:34:55,296 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade413to50
2022-05-13 23:34:55,302 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade41to42
2022-05-13 23:34:55,309 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade42to43
2022-05-13 23:34:55,315 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade43to44
2022-05-13 23:34:55,321 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade44to45
2022-05-13 23:34:55,329 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade45to46
2022-05-13 23:34:55,337 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade460to462
2022-05-13 23:34:55,345 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade462to47
2022-05-13 23:34:55,352 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade47to48
2022-05-13 23:34:55,358 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade48to49
2022-05-13 23:34:55,365 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin VersionUpgrade49to410
2022-05-13 23:34:55,378 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin X3DReader
2022-05-13 23:34:55,390 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin XmlMaterialProfile
2022-05-13 23:34:55,399 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [494]: Loaded plugin XRayView
2022-05-13 23:34:55,401 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [417]: Loading all plugins took 2.2344582080841064 seconds
2022-05-13 23:34:55,408 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [163]: Looking for old configuration files to upgrade.
2022-05-13 23:34:55,444 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [177]: Checking and performing updates took 0.03672337532043457
2022-05-13 23:34:55,445 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [244]: The preferences file cannot be opened or it is corrupted, so we will use default values
2022-05-13 23:34:55,445 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [251]: The preferences file 'None' cannot be found, will use default values
2022-05-13 23:34:55,446 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [254]: Completed loading preferences.
2022-05-13 23:34:55,482 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [289]: Created system tray icon.
2022-05-13 23:34:56,785 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [534]: Loading metadata into container registry took 1.2940478324890137 seconds
2022-05-13 23:34:56,794 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [142]: Select build plate: 0
2022-05-13 23:34:56,795 - INFO - [MainThread] cura.CuraApplication.run [815]: Initializing machine error checker
2022-05-13 23:34:56,796 - INFO - [MainThread] cura.CuraApplication.run [820]: Initializing machine manager
2022-05-13 23:34:56,797 - INFO - [MainThread] cura.CuraApplication.run [825]: Initializing container manager
2022-05-13 23:34:56,934 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [300]: The definition cache for definition fdmprinter failed to pickle.
2022-05-13 23:34:56,936 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.loadAuthDataFromPreferences [258]: Attempting to load the auth data from preferences.
2022-05-13 23:34:56,939 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [235]: Could not find output device with id digital_factory to remove
2022-05-13 23:34:56,957 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2022-05-13 23:34:56,989 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [176]: Loading theme file: C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\themes\cura-light\theme.json
2022-05-13 23:34:57,037 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [306]: Loaded theme C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\themes\cura-light
2022-05-13 23:34:57,037 - INFO - [MainThread] UM.Qt.Bindings.Theme.load [307]: System's em size is 13px.
2022-05-13 23:34:57,494 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [344]: Creating post processing plugin view.
2022-05-13 23:34:57,501 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ChangeAtZ
2022-05-13 23:34:57,503 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: ColorMix
2022-05-13 23:34:57,504 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: CreateThumbnail
2022-05-13 23:34:57,505 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2022-05-13 23:34:57,507 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: DisplayProgressOnLCD
2022-05-13 23:34:57,508 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: FilamentChange
2022-05-13 23:34:57,509 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: InsertAtLayerChange
2022-05-13 23:34:57,511 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: PauseAtHeight
2022-05-13 23:34:57,512 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: RetractContinue
2022-05-13 23:34:57,513 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: SearchAndReplace
2022-05-13 23:34:57,516 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: Stretch
2022-05-13 23:34:57,517 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: TimeLapse
2022-05-13 23:34:57,518 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [206]: Begin loading of script: UsePreviousProbeMeasurements
2022-05-13 23:34:57,608 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [354]: Post processing view created.
2022-05-13 23:34:57,685 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getIcon [142]: The icon 'search' is deprecated. Please use icon 'Magnifier' instead.
2022-05-13 23:34:57,686 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/cura/../share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2022-05-13 23:34:57,686 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/cura/../share/cura/resources/qml/Settings/SettingView.qml:40:9: QML TextField: Binding loop detected for property "implicitHeight"
2022-05-13 23:34:57,711 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/PyQt6/Qt6/qml/UM/MenuItem.qml:13:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 66. Use 'sequences: [ <key> ]' to bind to all of them.
2022-05-13 23:34:57,718 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/PyQt6/Qt6/qml/UM/MenuItem.qml:13:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 12. Use 'sequences: [ <key> ]' to bind to all of them.
2022-05-13 23:34:57,719 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/PyQt6/Qt6/qml/UM/MenuItem.qml:13:5: QML Shortcut: Shortcut: Only binding to one of multiple key bindings associated with 11. Use 'sequences: [ <key> ]' to bind to all of them.
2022-05-13 23:34:57,869 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/cura/../share/cura/resources/qml/ObjectSelector.qml:28:9: QML Button: Binding loop detected for property "height"
2022-05-13 23:34:57,996 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2022-05-13 23:34:58,069 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2022-05-13 23:34:58,070 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/cura/../share/cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:273: TypeError: Cannot read property 'hasRemoteConnection' of null
2022-05-13 23:34:58,133 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [431]: file:///C:/Program Files/Ultimaker Cura 5.0.0/cura/../share/cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:229: TypeError: Cannot read property 'isEnabled' of null
2022-05-13 23:34:58,158 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2022-05-13 23:34:58,182 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Creating model checker view.
2022-05-13 23:34:58,186 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [127]: Model checker view created.
2022-05-13 23:34:58,187 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [76]: Creating dialog [MoreInfoWindow.qml]
2022-05-13 23:34:58,375 - DEBUG - [MainThread] cura.CuraApplication.run [866]: Booting Cura took 5.444199800491333 seconds
2022-05-13 23:34:58,375 - DEBUG - [JobQueueWorker [0]] cura.Machines.ContainerTree.run [174]: Started background loading of MachineNodes
2022-05-13 23:34:58,376 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [79]: No machine with name Creality Ender-3 Pro in list of firmware to check.
2022-05-13 23:34:58,377 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [79]: No machine with name Creality Ender-3 in list of firmware to check.
2022-05-13 23:34:58,378 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2022-05-13 23:34:58,378 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [38]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2022-05-13 23:34:58,379 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [58]: Updating QualityProfilesDropDownMenuModel.
2022-05-13 23:34:58,379 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [70]: No active GlobalStack, set quality profile model as empty.
2022-05-13 23:34:58,711 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [211]: Support for Vertex Array Objects: True
2022-05-13 23:34:58,718 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: Initialized OpenGL subsystems.
2022-05-13 23:34:58,719 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: OpenGL Version: 4.1.0 NVIDIA 512.15
2022-05-13 23:34:58,719 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [117]: OpenGL Vendor: NVIDIA Corporation
2022-05-13 23:34:58,719 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [118]: OpenGL Renderer: NVIDIA GeForce RTX 3060 Ti/PCIe/SSE2
2022-05-13 23:34:58,720 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [119]: GLSL Version: 4.0.0
2022-05-13 23:34:58,721 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\shaders\default.shader]...
2022-05-13 23:34:58,723 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\shaders\selection.shader]...
2022-05-13 23:34:58,725 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\shaders\select_face.shader]...
2022-05-13 23:34:58,726 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\shaders\default.shader]...
2022-05-13 23:34:58,727 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\shaders\composite.shader]...
2022-05-13 23:34:58,729 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\overhang.shader]...
2022-05-13 23:34:58,730 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\striped.shader]...
2022-05-13 23:34:58,732 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\transparent_object.shader]...
2022-05-13 23:34:58,733 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\striped.shader]...
2022-05-13 23:34:58,735 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\xray.shader]...
2022-05-13 23:34:58,737 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\xray_composite.shader]...
2022-05-13 23:34:58,739 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\uranium\resources\shaders\platform.shader]...
2022-05-13 23:34:58,743 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [C:\Program Files\Ultimaker Cura 5.0.0\share\cura\resources\shaders\xray.shader]...
Happens with 5.0 and 4.13
FIXED IT BY STOPPING ASUS GPU TWEAK SOFTWARE THAT CAME WITH MY TUF 3060TI! Even though Cura ran perfectly on the same machine with the same software a few days ago...
FIXED IT BY STOPPING ASUS GPU TWEAK SOFTWARE THAT CAME WITH MY TUF 3060TI! Even though Cura ran perfectly on the same machine with the same software a few days ago...
Hi, I just created my github account to thank and confirm this solution, I've been having the same issue (Cura closing after loading every time) with a previous and the latest Cura versions, closed GPU Tweak II and Cura is running fine again.
Then it occurred to me that the OSD overlay might be trying to interact with the Cura window, and indeed, I can confirm (at least in my case) that the problem is the GPU Tweak OSD overlay, I have Cura running with GPU Tweak but the OSD overlay off. I hope this helps.
Application version 4.8
Platform Windows 10 Nvida 2060Super GPU
Printer Ender 3V2
Reproduction steps won't load gives me only a blank white screen and stops responding in task manager
Screenshot(s)
Actual results
Expected results
Project file (For slicing bugs, provide a project which clearly shows the bug, by going to File->Save Project. For big files you may need to use WeTransfer or similar file sharing sites. G-code files are not project files!)
Log file
Additional information (Extra information relevant to the issue.)