search

UnchartedBull / OctoDash

OctoDash is a simple, but beautiful dashboard for OctoPrint.
https://unchartedbull.github.io/OctoDash/index.html
Apache License 2.0
1.02k stars 225 forks source link

TouchScreen Controls Inverted #3402

Open acer8888 opened 1 year ago

acer8888 commented 1 year ago

What doesn't work? My LCD touchscreen touch points are upside down. I was able to get the display to be orientated correctly, however having difficulties getting the touch points correct.

What did you already try? I believe I need to set "xinput set-prop ‘ADS7846 Touchscreen’ ‘Coordinate Transformation Matrix’ -1 0 1 0 -1 1 0 0 1"

I opened a terminal on the display through Ratpoison (CTRL + T, C) ran the command, it accepted it but nothing changed. I also put the command in my $HOME/.xinitrc before OctoDash is launched, no change.

I tested with a normal Raspbian image and it works properly, I just cannot get it to work with Ratpoison and Octodash. Any help is appreciated.

General Information:

bokodimate commented 1 year ago

I had the same issue. My screen is in vertical position. Open /boot/config.txt using PuTTY with the following code: sudo nano /boot/config.txt

To rotate the screen (1 for 90 degrees, 2 for 180 degrees, 3 for 270 degrees) write this line: display_lcd_rotate=3

The following line fixed my touch screen points. I believe this swaps the X and Y coordinates. You can give it a try. dtoverlay=pri-ft5406,touchscreen-swapped-x-y=1,touchscreen-inverted-y=1

You can find more info here: https://forums.raspberrypi.com/viewtopic.php?t=253973

... and here: https://forums.raspberrypi.com/viewtopic.php?f=63&t=253959&p=1549853#p1549853

acer8888 commented 1 year ago

Hi @bokodimate Thank you for the input. I found those same articles you linked, it appears with Raspberry pi 4 the /boot/config.txt changes no longer work.. Due to an update video driver you have to use: DISPLAY=:0 xrandr --output HDMI-1 --rotate inverted

Here is the site I found the updated changes.. https://linuxhint.com/rotate-screen-in-raspberry-pi/

I really think the xinput set-prop command is the way to make the touchpoints correction, im just unfamiliar on how to make it work with octodash.