search

UniversalDevicesInc-PG3 / udi-poly-ELK

MIT License
2 stars 1 forks source link

UD Mobile screens update on bypass #27

Closed djc0739 closed 3 years ago

djc0739 commented 3 years ago

When in UD Mobile on either an Elk zone or Area 1 screen preparing to arm and a zone is bypassed, UD Mobile doesn't update to show zone bypass. Was unable to force an update. Had to exit and re-enter app.

jimboca commented 3 years ago

I've seen updates not happen in UD Mobile as well, and not sure what to do about it. Will have to get Javier involved...

If you can do the same thing and also have the AC open can you see it change there?

djc0739 commented 3 years ago

Occasionally, yes, I mentioned this in the bypass post. The first bypass shows up right away in the nodeserver. When I did a 2nd one, it didn't show up until I hit the bypass clear button. Then the noseserver updated to show 2 zones bypassed, then went to 0 zones bypassed.

jimboca commented 3 years ago

This sounds like a delay from Polyglot to the ISY. You can watch the nodeserver log in Polyglot and see the setDriver call executed and watch the AC to see it reflect the change.

djc0739 commented 3 years ago

I can't re-test this now, since nothing is working. But when I tested this originally I was watching both the Nodeserver in the admin console and UD Mobile. That is how I was seeing the differences. I also backed out of UD Mobile to main page. I still didn't get update. In the admin console, I was changing from the zone page to the alarm set page.

jimboca commented 3 years ago

Seems like this is all fixed now.