Cure & Repetier

[Golf3gti1]

Hello I have the latest version of Cura 5.4.0 and I followed your instructions and unfortunately I did not get a connection to the repeater. When I enter the APi number, the Connect button is grayed out. And I can not connect to the repeater. Would appreciate some help

[VMaxx]

My 3d printer has been sick so I've not been keeping up with Cura lately. I'll have to take a look at it and see. There's likely a version issue as I haven't updated it since version 5.2.1

On Thu, Sep 28, 2023 at 6:54 AM Emrah @.***> wrote:

Hello I have the latest version of Cura 5.4.0 and I followed your instructions and unfortunately I did not get a connection to the repeater. When I enter the APi number, the Connect button is grayed out. And I can not connect to the repeater. Would appreciate some help

— Reply to this email directly, view it on GitHub https://github.com/VMaxx/RepetierIntegration/issues/65, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADC3HUUJIMH3SDN2RFHYEPTX4VQPDANCNFSM6AAAAAA5K2XECQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

[Golf3gti1]

Since would be super if it would funktinieren

[VMaxx]

OK I tested it as is with 5.4 and it worked fine. The most common issue is not giving the instance name and printer name in repetier server the same. If you have it mismatched you'll have to delete it in Cura, and re do it to match.

[EmEiBee]

I'll hang on to it: In CURA 5.5 the plugin cannot be made to cooperate. Although I have completely re-created the printer as recommended and can select the printer from the drop-down with "get printer" even after connecting to Repetier, when I enter the API key it then complains that the printer was supposedly not selected.

[VMaxx]

Your printer name doesn't match the instance name.  One had a space the other an underscoreSent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Michael @.> Date: 1/8/24 4:47 AM (GMT-06:00) To: VMaxx/RepetierIntegration @.> Cc: VMaxx @.>, Comment @.> Subject: Re: [VMaxx/RepetierIntegration] Cure & Repetier (Issue #65) I'll hang on to it: In CURA 5.5 the plugin cannot be made to cooperate. Although I have completely re-created the printer as recommended and can select the printer from the drop-down with "get printer" even after connecting to Repetier, when I enter the API key it then complains that the printer was supposedly not selected. img-2024-01-08-11-45-52.png (view on web) img-2024-01-08-11-47-00.png (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

[EmEiBee]

Your printer name doesn't match the instance name. One had a space the other an underscore

You are right but meanwhile I have try it some times more including fresh installation of CURA and also with the same name for the instance as the printer is named... No success. I can mark them via "Get Printers" and if I come back it is till there, but at the moment if I enter the API the printer is gone, no matter if the names match or not...

[VMaxx]

Try deleting the %appdata%\cura folder and reinstall. make sure instance and printer name you have in repetier are the same avoid spaces.

On Mon, Jan 8, 2024 at 2:43 PM Michael @.***> wrote:

Your printer name doesn't match the instance name. One had a space the other an underscore You are right but meanwhile I have try it some times more including fresh installation of CURA and also with the same name for the instance as the printer is named... No success. I can mark them via "Get Printers" and if I come back it is till there, but at the moment if I enter the API the printer is gone, no matter if the names match or not...

— Reply to this email directly, view it on GitHub https://github.com/VMaxx/RepetierIntegration/issues/65#issuecomment-1881791564, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADC3HUQN52ZA5JKT75XIQ7TYNRLALAVCNFSM6AAAAAA5K2XECSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOBRG44TCNJWGQ . You are receiving this because you commented.Message ID: @.***>

[EmEiBee]

... I will try the next days and call back then; busy with other stuff right now (flood, frost, ...)

[VMaxx]

Good luck, hang in there.

On Tue, Jan 9, 2024 at 7:34 AM Michael @.***> wrote:

... I will try the next days and call back then; busy with other stuff right now (flood, frost, ...)

— Reply to this email directly, view it on GitHub https://github.com/VMaxx/RepetierIntegration/issues/65#issuecomment-1883061577, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADC3HUXE352SDR7SJEYMI5TYNVBOLAVCNFSM6AAAAAA5K2XECSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOBTGA3DCNJXG4 . You are receiving this because you commented.Message ID: @.***>

[Sectorchan]

+1 here.

Installed 5.6 fresh, added plugin and always stuck in the loop that "I havent selected the printername"