Mte90
commented
4 years ago 403 is something about permission. On what system are you using VVV?
Closed pressoholics closed 2 years ago
Mte90
commented
4 years ago 403 is something about permission. On what system are you using VVV?
tomjn
commented
4 years ago I just did a provision of the develop branch in a brand new folder, with the default config.yml that comes out of the box, and vvv.test loaded fine
Can you share with us the full terminal output from the provision?
pressoholics
commented
4 years ago Sorry for the delay, heres the full terminal output for provision after vagrant destroy:
__ __ __ __
\ V\ V\ V / Varying Vagrant Vagrants
\_/\_/\_/ v3.5.0-git::develop
Platform: platform-darwin19.2.0 shell:/bin/bash vagrant-hostsupdater vagrant-goodhosts shared_db_folder_disabled, VVV Path: "/Volumes/Mac Storage/VVV-4"
Vagrant: v2.2.10, VirtualBox: v6.1.14r140239
Docs: https://varyingvagrantvagrants.org/
Contribute: https://github.com/varying-vagrant-vagrants/vvv
Dashboard: http://vvv.test
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'ubuntu/bionic64'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'ubuntu/bionic64' version '20201014.0.0' is up to date...
==> default: Setting the name of the VM: VVV-4_2740bc1b51c
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Connection reset. Retrying...
default: Warning: Remote connection disconnect. Retrying...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
default: The guest additions on this VM do not match the installed version of
default: VirtualBox! In most cases this is fine, but in rare cases it can
default: prevent things such as shared folders from working properly. If you see
default: shared folder errors, please make sure the guest additions within the
default: virtual machine match the version of VirtualBox you have installed on
default: your host and reload your VM.
default:
default: Guest Additions Version: 5.2.42
default: VirtualBox Version: 6.1
==> default: [vagrant-hostsupdater] Checking for host entries
==> default: [vagrant-hostsupdater] Writing the following entries to (/etc/hosts)
==> default: [vagrant-hostsupdater] 192.168.50.4 vvv # VAGRANT: f3c4ed8963f627a867ace7c739b7640b (default) / 22a21224-5e43-414e-bf42-4de20a13e0f3
==> default: [vagrant-hostsupdater] This operation requires administrative access. You may skip it by manually adding equivalent entries to the hosts file.
==> default: [vagrant-goodhosts] Checking for host entries
==> default: [vagrant-goodhosts] Warning: The vagrant-hostsupdater plugin is installed, hostsupdater always adds the VM name even if the VagrantFile says not to. This shouldn't cause issues, but if it does, uninstall hostsupdater
==> default: [vagrant-goodhosts] - found entry for: 192.168.50.4 vvv.test
==> default: [vagrant-goodhosts] - found entry for: 192.168.50.4 one.wordpress.test
==> default: [vagrant-goodhosts] - found entry for: 192.168.50.4 tideways.vvv.test
==> default: [vagrant-goodhosts] - found entry for: 192.168.50.4 xhgui.vvv.test
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
default: /srv/www => /Volumes/Mac Storage/VVV-4/www
default: /srv/config => /Volumes/Mac Storage/VVV-4/config
default: /var/log/php => /Volumes/Mac Storage/VVV-4/log/php
default: /srv/database => /Volumes/Mac Storage/VVV-4/database/sql
default: /var/log/nginx => /Volumes/Mac Storage/VVV-4/log/nginx
default: /srv/provision => /Volumes/Mac Storage/VVV-4/provision
default: /srv/certificates => /Volumes/Mac Storage/VVV-4/certificates
default: /var/log/memcached => /Volumes/Mac Storage/VVV-4/log/memcached
default: /var/log/provisioners => /Volumes/Mac Storage/VVV-4/log/provisioners
==> default: Detected mount owner ID within mount options. (uid: 0 guestpath: /var/log/memcached)
==> default: Detected mount group ID within mount options. (gid: 106 guestpath: /var/log/memcached)
==> default: Detected mount owner ID within mount options. (uid: 0 guestpath: /var/log/nginx)
==> default: Detected mount group ID within mount options. (gid: 106 guestpath: /var/log/nginx)
==> default: Detected mount owner ID within mount options. (uid: 0 guestpath: /var/log/php)
==> default: Detected mount group ID within mount options. (gid: 106 guestpath: /var/log/php)
==> default: Detected mount owner ID within mount options. (uid: 0 guestpath: /var/log/provisioners)
==> default: Detected mount group ID within mount options. (gid: 106 guestpath: /var/log/provisioners)
==> default: Detected mount owner ID within mount options. (uid: 1000 guestpath: /srv/www)
==> default: Detected mount group ID within mount options. (gid: 33 guestpath: /srv/www)
==> default: Running provisioner: file...
default: /Volumes/Mac Storage/VVV-4/version => /home/vagrant/version
==> default: Running provisioner: default (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-1c61pw7.sh
default: ▷ Running the 'main' provisioner...
default: * Bash profile setup and directories.
default: * Setting ownership of files in /home/vagrant to vagrant
default: * Copying /srv/config/bash_profile to /home/vagrant/.bash_profile
default: * Copying /srv/config/bash_aliases to /home/vagrant/.bash_aliases
default: * Copying /srv/config/bash_aliases to /root/.bash_aliases
default: * Copying /srv/config/vimrc to /home/vagrant/.vimrc
default: * Copying /srv/config/subversion-servers to /home/vagrant/.subversion/servers
default: * Copying /srv/config/subversion-config to /home/vagrant/.subversion/config
default: * Copying /srv/config/ssh_known_hosts to /etc/ssh/ssh_known_hosts
default: * Copying /srv/config/sshd_config to /etc/ssh/sshd_config
default: * Reloading SSH Daemon
default: * Copying /srv/config/apt-conf-d/99hashmismatch to /etc/apt/apt.conf.d/99hashmismatch
default: * Testing network connection to https://ppa.launchpad.net
default: * Successful Network connection to https://ppa.launchpad.net detected
default: * Testing network connection to https://wordpress.org
default: * Successful Network connection to https://wordpress.org detected
default: * Testing network connection to https://github.com
default: * Successful Network connection to https://github.com detected
default: * Testing network connection to https://raw.githubusercontent.com
default: * Successful Network connection to https://raw.githubusercontent.com detected
default: * Testing network connection to https://getcomposer.org
default: * Successful Network connection to https://getcomposer.org detected
default: * Testing network connection to http://ams2.mirrors.digitalocean.com
default: * Successful Network connection to http://ams2.mirrors.digitalocean.com detected
default: * Network checks succeeded
default: * Applying the Varying Vagrant Vagrants mirror signing key...
default: OK
default: * Adding ppa:git-core/ppa repository
default: * git-core/ppa added
default: * Applying the PackageCloud Git-LFS signing key...
default: OK
default:
default: * Setting up MySQL configuration file links...
default: * creating mysql group
default: * adding the mysql user
default: * Copying /srv/config/mysql-config/vvv-core.cnf to /etc/mysql/conf.d/vvv-core.cnf
default: * Applying the MariaDB signing key...
default: OK
default: * Applying Nginx signing key...
default: OK
default: * Applying the Ondřej PHP signing key...
default: OK
default: * Applying NodeSource NodeJS signing key...
default: OK
default:
default: * Main packages check and install.
default: * Cleaning up dpkg lock file
default: * Updating apt keys
default: gpg: key 3B4FE6ACC0B21F32: 3 signatures not checked due to missing keys
default: gpg: key 3B4FE6ACC0B21F32: "Ubuntu Archive Automatic Signing Key (2012) <ftpmaster@ubuntu.com>" not changed
default: gpg: key D94AA3F0EFE21092: 3 signatures not checked due to missing keys
default: gpg: key D94AA3F0EFE21092: "Ubuntu CD Image Automatic Signing Key (2012) <cdimage@ubuntu.com>" not changed
default: gpg: key 871920D1991BC93C: 1 signature not checked due to a missing key
default: gpg: key 871920D1991BC93C: "Ubuntu Archive Automatic Signing Key (2018) <ftpmaster@ubuntu.com>" not changed
default: gpg: Total number processed: 3
default: gpg: unchanged: 3
default: * Running apt-get update...
default: Get:1 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic InRelease [20.8 kB]
default: Get:2 http://sfo1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic InRelease [6265 B]
default: Get:3 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic InRelease [6265 B]
default: Get:4 http://sgp1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic InRelease [6265 B]
default: Get:5 http://mirrors.ukfast.co.uk/sites/mariadb/repo/10.4/ubuntu bionic InRelease [6265 B]
default: Get:6 http://sfo1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main Sources [1740 B]
default: Get:7 http://ppa.launchpad.net/ondrej/php/ubuntu bionic InRelease [20.8 kB]
default: Get:8 http://sfo1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main arm64 Packages [15.8 kB]
default: Get:9 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main Sources [1740 B]
default: Get:10 http://sfo1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main ppc64el Packages [15.8 kB]
default: Get:11 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]
default: Get:12 https://deb.nodesource.com/node_10.x bionic InRelease [4584 B]
default: Get:13 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 Packages [16.2 kB]
default: Get:14 http://sfo1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 Packages [16.2 kB]
default: Get:15 http://archive.ubuntu.com/ubuntu bionic InRelease [242 kB]
default: Get:16 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main arm64 Packages [15.8 kB]
default: Get:17 https://nginx.org/packages/mainline/ubuntu bionic InRelease [2862 B]
default: Get:18 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main ppc64el Packages [15.8 kB]
default: Get:19 http://ppa.launchpad.net/varying-vagrant-vagrants/php/ubuntu bionic InRelease [15.9 kB]
default: Get:20 http://sgp1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main Sources [1740 B]
default: Get:21 http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadb/repo/10.4/ubuntu bionic InRelease [6265 B]
default: Get:23 http://sgp1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 Packages [16.2 kB]
default: Get:24 http://mirrors.piconets.webwerks.in/mariadb-mirror/repo/10.4/ubuntu bionic InRelease [6265 B]
default: Get:25 http://sgp1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main ppc64el Packages [15.8 kB]
default: Get:26 http://mirrors.ukfast.co.uk/sites/mariadb/repo/10.4/ubuntu bionic/main Sources [1740 B]
default: Get:27 http://sgp1.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main arm64 Packages [15.8 kB]
default: Get:28 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic/main amd64 Packages [3048 B]
default: Get:29 http://archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]
default: Get:30 http://mirrors.ukfast.co.uk/sites/mariadb/repo/10.4/ubuntu bionic/main amd64 Packages [16.2 kB]
default: Get:22 https://packagecloud.io/github/git-lfs/ubuntu bionic InRelease [23.2 kB]
default: Get:31 http://security.ubuntu.com/ubuntu bionic-security/main amd64 Packages [1400 kB]
default: Get:32 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic/main Translation-en [2252 B]
default: Get:33 http://archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB]
default: Get:34 https://deb.nodesource.com/node_10.x bionic/main amd64 Packages [769 B]
default: Get:35 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main Sources [29.4 kB]
default: Get:36 http://mirrors.ukfast.co.uk/sites/mariadb/repo/10.4/ubuntu bionic/main arm64 Packages [15.8 kB]
default: Get:37 http://security.ubuntu.com/ubuntu bionic-security/main Translation-en [277 kB]
default: Get:38 http://security.ubuntu.com/ubuntu bionic-security/restricted amd64 Packages [166 kB]
default: Get:39 https://nginx.org/packages/mainline/ubuntu bionic/nginx Sources [57.2 kB]
default: Get:40 http://security.ubuntu.com/ubuntu bionic-security/restricted Translation-en [22.1 kB]
default: Get:41 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 Packages [1079 kB]
default: Get:42 http://security.ubuntu.com/ubuntu bionic-security/universe Translation-en [242 kB]
default: Get:43 http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadb/repo/10.4/ubuntu bionic/main Sources [1736 B]
default: Get:44 http://mirrors.ukfast.co.uk/sites/mariadb/repo/10.4/ubuntu bionic/main ppc64el Packages [15.8 kB]
default: Get:45 http://security.ubuntu.com/ubuntu bionic-security/multiverse amd64 Packages [12.9 kB]
default: Get:46 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 Packages [80.3 kB]
default: Get:47 http://security.ubuntu.com/ubuntu bionic-security/multiverse Translation-en [2964 B]
default: Get:48 https://nginx.org/packages/mainline/ubuntu bionic/nginx amd64 Packages [58.2 kB]
default: Get:49 http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadb/repo/10.4/ubuntu bionic/main amd64 Packages [16.2 kB]
default: Get:50 http://mirrors.piconets.webwerks.in/mariadb-mirror/repo/10.4/ubuntu bionic/main Sources [1740 B]
default: Get:51 http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadb/repo/10.4/ubuntu bionic/main arm64 Packages [15.8 kB]
default: Get:52 http://archive.ubuntu.com/ubuntu bionic/main amd64 Packages [1019 kB]
default: Get:53 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main Translation-en [31.3 kB]
default: Get:54 http://ftp.yz.yamagata-u.ac.jp/pub/dbms/mariadb/repo/10.4/ubuntu bionic/main ppc64el Packages [15.7 kB]
default: Get:55 http://mirrors.piconets.webwerks.in/mariadb-mirror/repo/10.4/ubuntu bionic/main amd64 Packages [16.2 kB]
default: Get:56 http://archive.ubuntu.com/ubuntu bionic/main Translation-en [516 kB]
default: Get:57 http://ppa.launchpad.net/varying-vagrant-vagrants/php/ubuntu bionic/main Sources [15.1 kB]
default: Get:59 http://archive.ubuntu.com/ubuntu bionic/restricted amd64 Packages [9184 B]
default: Get:60 http://mirrors.piconets.webwerks.in/mariadb-mirror/repo/10.4/ubuntu bionic/main ppc64el Packages [15.8 kB]
default: Get:61 http://ppa.launchpad.net/varying-vagrant-vagrants/php/ubuntu bionic/main amd64 Packages [41.0 kB]
default: Get:62 http://archive.ubuntu.com/ubuntu bionic/restricted Translation-en [3584 B]
default: Get:63 http://archive.ubuntu.com/ubuntu bionic/universe amd64 Packages [8570 kB]
default: Get:58 https://packagecloud.io/github/git-lfs/ubuntu bionic/main amd64 Packages [3784 B]
default: Get:64 http://mirrors.piconets.webwerks.in/mariadb-mirror/repo/10.4/ubuntu bionic/main arm64 Packages [15.8 kB]
default: Get:65 http://ppa.launchpad.net/varying-vagrant-vagrants/php/ubuntu bionic/main Translation-en [11.5 kB]
default: Get:66 http://archive.ubuntu.com/ubuntu bionic/universe Translation-en [4941 kB]
default: Get:67 http://archive.ubuntu.com/ubuntu bionic/multiverse amd64 Packages [151 kB]
default: Get:68 http://archive.ubuntu.com/ubuntu bionic/multiverse Translation-en [108 kB]
default: Get:69 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [1727 kB]
default: Get:70 http://archive.ubuntu.com/ubuntu bionic-updates/main Translation-en [367 kB]
default: Get:71 http://archive.ubuntu.com/ubuntu bionic-updates/restricted amd64 Packages [184 kB]
default: Get:72 http://archive.ubuntu.com/ubuntu bionic-updates/restricted Translation-en [24.6 kB]
default: Get:73 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [1684 kB]
default: Get:74 http://archive.ubuntu.com/ubuntu bionic-updates/universe Translation-en [354 kB]
default: Get:75 http://archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 Packages [31.9 kB]
default: Get:76 http://archive.ubuntu.com/ubuntu bionic-updates/multiverse Translation-en [6980 B]
default: Get:77 http://archive.ubuntu.com/ubuntu bionic-backports/main amd64 Packages [10.0 kB]
default: Get:78 http://archive.ubuntu.com/ubuntu bionic-backports/main Translation-en [4764 B]
default: Get:79 http://archive.ubuntu.com/ubuntu bionic-backports/universe amd64 Packages [10.3 kB]
default: Get:80 http://archive.ubuntu.com/ubuntu bionic-backports/universe Translation-en [4588 B]
default: Fetched 24.2 MB in 7s (3484 kB/s)
default: Reading package lists...
default: * Installing apt-get packages...
default: Reading package lists...
default: Building dependency tree...
default: Reading state information...
default: curl is already the newest version (7.58.0-2ubuntu3.10).
default: curl set to manually installed.
default: software-properties-common is already the newest version (0.96.24.32.14).
default: software-properties-common set to manually installed.
default: The following additional packages will be installed:
default: autoconf automake autotools-dev binutils binutils-common
default: binutils-x86-64-linux-gnu cpp cpp-7 dpkg-dev fontconfig-config
default: fonts-dejavu-core g++-7 galera-4 gcc gcc-7 gcc-7-base git-man
default: hicolor-icon-theme imagemagick-6-common imagemagick-6.q16 libaio1 libapr1
default: libaprutil1 libargon2-1 libasan4 libatomic1 libbinutils libc-client2007e
default: libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libcroco3 libdbi-perl
default: libdpkg-perl libfftw3-double3 libfontconfig1 libgcc-7-dev libgd3 libgomp1
default: libicu65 libisl19 libitm1 libjbig0 libjpeg-turbo8 libjpeg8 liblcms2-2
default: liblqr-1-0 liblsan0 libltdl7 libmagickcore-6.q16-3 libmagickwand-6.q16-3
default: libmariadb3 libmemcached11 libmpc3 libmpx2 libnet1 libopts25 libpcre16-3
default: libpcre2-8-0 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5
default: libpython-stdlib libpython2.7-minimal libpython2.7-stdlib libquadmath0
default: libserf-1-1 libsodium23 libssh2-1 libssl-dev libssl1.1 libstdc++-7-dev
default: libsvn-perl libsvn1 libterm-readkey-perl libtiff5 libtool libtsan0 libubsan0
default: libwebp6 libxpm4 libyaml-perl libzip4 linux-libc-dev m4 mariadb-client-10.4
default: mariadb-client-core-10.4 mariadb-common mariadb-server-10.4
default: mariadb-server-core-10.4 mlock mysql-common php-common php7.1-pcov
default: php7.2-igbinary php7.2-msgpack php7.2-opcache php7.2-pcov php7.2-readline
default: php7.3-pcov php7.4-pcov pkg-config python python-minimal python-pip-whl
default: python-pkg-resources python2.7 python2.7-minimal shtool socat ssl-cert
default: vim-common vim-runtime vim-tiny
default: Suggested packages:
default: autoconf-archive gnu-standards autoconf-doc binutils-doc cpp-doc
default: gcc-7-locales debian-keyring g++-multilib g++-7-multilib gcc-7-doc
default: libstdc++6-7-dbg gcc-multilib manpages-dev flex bison gdb gcc-doc
default: gcc-7-multilib libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg
default: libasan4-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg
default: libmpx2-dbg libquadmath0-dbg gettext-doc autopoint libasprintf-dev
default: libgettextpo-dev git-daemon-run | git-daemon-sysvinit git-doc git-el
default: git-email git-gui gitk gitweb git-cvs git-mediawiki imagemagick-doc
default: autotrace cups-bsd | lpr | lprng enscript ffmpeg gimp gnuplot grads graphviz
default: hp2xx html2ps libwmf-bin mplayer povray radiance sane-utils texlive-base-bin
default: transfig ufraw-batch xdg-utils uw-mailutils glibc-doc libclone-perl
default: libmldbm-perl libnet-daemon-perl libsql-statement-perl bzr libfftw3-bin
default: libfftw3-dev libgd-tools liblcms2-utils libmagickcore-6.q16-3-extra
default: libssl-doc libstdc++-7-doc libtool-doc gfortran | fortran95-compiler gcj-jdk
default: libyaml-shell-perl m4-doc make-doc mailx mariadb-test tinyca
default: libcache-memcached-perl libmemcached libanyevent-perl ntp-doc dh-php
default: procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre postfix-lmdb
default: postfix-sqlite sasl2-bin dovecot-common resolvconf postfix-cdb mail-reader
default: postfix-doc python-doc python-tk python-setuptools-doc python2.7-doc
default: binfmt-support openssl-blacklist db5.3-util libapache2-mod-svn
default: subversion-tools ctags vim-doc vim-scripts indent
default: Recommended packages:
default: build-essential fakeroot libalgorithm-merge-perl libmagickcore-6.q16-3-extra
default: ghostscript netpbm manpages-dev libfile-fcntllock-perl gsfonts libltdl-dev
default: libyaml-libyaml-perl | libyaml-syck-perl libdbd-mysql-perl
default: libhtml-template-perl sntp pkg-php-tools ttf-dejavu-core python-all-dev
default: python-wheel
default: The following NEW packages will be installed:
default: autoconf automake autotools-dev binutils binutils-common
default: binutils-x86-64-linux-gnu colordiff cpp cpp-7 dos2unix dpkg-dev
default: fontconfig-config fonts-dejavu-core g++ g++-7 galera-4 gcc gcc-7 gcc-7-base
default: gettext git-lfs git-svn hicolor-icon-theme imagemagick imagemagick-6-common
default: imagemagick-6.q16 lftp libaio1 libapr1 libaprutil1 libargon2-1 libasan4
default: libatomic1 libbinutils libc-client2007e libc-dev-bin libc6-dev libcc1-0
default: libcilkrts5 libcroco3 libdbi-perl libdpkg-perl libfftw3-double3
default: libfontconfig1 libgcc-7-dev libgd3 libgomp1 libicu65 libisl19 libitm1
default: libjbig0 libjpeg-turbo8 libjpeg8 liblcms2-2 liblqr-1-0 liblsan0 libltdl7
default: libmagickcore-6.q16-3 libmagickwand-6.q16-3 libmariadb3 libmemcached11
default: libmpc3 libmpx2 libnet1 libopts25 libpcre16-3 libpcre2-8-0 libpcre3-dev
default: libpcre32-3 libpcrecpp0v5 libpython-stdlib libpython2.7-minimal
default: libpython2.7-stdlib libquadmath0 libserf-1-1 libsodium23 libssh2-1
default: libssl-dev libstdc++-7-dev libsvn-perl libsvn1 libterm-readkey-perl libtiff5
default: libtool libtsan0 libubsan0 libwebp6 libxpm4 libyaml-perl libzip4
default: linux-libc-dev m4 make mariadb-client-10.4 mariadb-client-core-10.4
default: mariadb-common mariadb-server mariadb-server-10.4 mariadb-server-core-10.4
default: memcached mlock mysql-common nginx ngrep nodejs ntp ntpdate php-common
default: php-pcov php-pear php7.1-pcov php7.2-bcmath php7.2-cli php7.2-common
default: php7.2-curl php7.2-dev php7.2-fpm php7.2-gd php7.2-igbinary php7.2-imagick
default: php7.2-imap php7.2-intl php7.2-json php7.2-mbstring php7.2-memcache
default: php7.2-memcached php7.2-msgpack php7.2-mysql php7.2-opcache php7.2-pcov
default: php7.2-readline php7.2-soap php7.2-ssh2 php7.2-xdebug php7.2-xml php7.2-yaml
default: php7.2-zip php7.3-pcov php7.4-pcov pkg-config postfix python python-minimal
default: python-pip python-pip-whl python-pkg-resources python-setuptools python2.7
default: python2.7-minimal shtool socat ssl-cert subversion unzip zip
default: The following packages will be upgraded:
default: git git-man libc6 libpcre3 libssl1.1 vim vim-common vim-runtime vim-tiny
default: 9 upgraded, 155 newly installed, 0 to remove and 39 not upgraded.
default: Need to get 148 MB of archives.
default: After this operation, 617 MB of additional disk space will be used.
default: Get:1 https://deb.nodesource.com/node_10.x bionic/main amd64 nodejs amd64 10.23.0-1nodesource1 [16.2 MB]
default: Get:2 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mysql-common all 1:10.4.16+maria~bionic [5560 B]
default: Get:3 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libssl1.1 amd64 1.1.1g-1+ubuntu18.04.1+deb.sury.org+1 [1529 kB]
default: Get:4 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libc6 amd64 2.27-3ubuntu1.3 [2831 kB]
default: Get:5 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mariadb-common all 1:10.4.16+maria~bionic [3528 B]
default: Get:7 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 galera-4 amd64 26.4.6-bionic [9404 kB]
default: Get:6 https://packagecloud.io/github/git-lfs/ubuntu bionic/main amd64 git-lfs amd64 2.12.1 [6886 kB]
default: Get:8 https://nginx.org/packages/mainline/ubuntu bionic/nginx amd64 nginx amd64 1.19.4-1~bionic [869 kB]
default: Get:9 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libpcre3 amd64 2:8.44-2+ubuntu18.04.1+deb.sury.org+1 [239 kB]
default: Get:10 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libjpeg-turbo8 amd64 1.5.2-0ubuntu5.18.04.4 [110 kB]
default: Get:11 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 libmariadb3 amd64 1:10.4.16+maria~bionic [147 kB]
default: Get:12 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgomp1 amd64 8.4.0-1ubuntu1~18.04 [76.5 kB]
default: Get:13 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mariadb-client-core-10.4 amd64 1:10.4.16+maria~bionic [780 kB]
default: Get:14 http://archive.ubuntu.com/ubuntu bionic/main amd64 libfftw3-double3 amd64 3.3.7-1 [735 kB]
default: Get:15 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mariadb-client-10.4 amd64 1:10.4.16+maria~bionic [1174 kB]
default: Get:16 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mariadb-server-core-10.4 amd64 1:10.4.16+maria~bionic [6336 kB]
default: Get:17 http://archive.ubuntu.com/ubuntu bionic/main amd64 fonts-dejavu-core all 2.37-1 [1041 kB]
default: Get:18 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php-common all 2:79+ubuntu18.04.1+deb.sury.org+4 [15.8 kB]
default: Get:19 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mariadb-server-10.4 amd64 1:10.4.16+maria~bionic [4670 kB]
default: Get:20 http://archive.ubuntu.com/ubuntu bionic/main amd64 fontconfig-config all 2.12.6-0ubuntu2 [55.8 kB]
default: Get:21 http://archive.ubuntu.com/ubuntu bionic/main amd64 libfontconfig1 amd64 2.12.6-0ubuntu2 [137 kB]
default: Get:22 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.4-pcov amd64 1.0.6-3+ubuntu18.04.1+deb.sury.org+1 [15.3 kB]
default: Get:23 http://archive.ubuntu.com/ubuntu bionic/main amd64 libjbig0 amd64 2.1-3.1build1 [26.7 kB]
default: Get:24 http://ams2.mirrors.digitalocean.com/mariadb/repo/10.4/ubuntu bionic/main amd64 mariadb-server all 1:10.4.16+maria~bionic [3184 B]
default: Get:25 http://archive.ubuntu.com/ubuntu bionic/main amd64 libjpeg8 amd64 8c-2ubuntu8 [2194 B]
default: Get:26 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 liblcms2-2 amd64 2.9-1ubuntu0.1 [139 kB]
default: Get:27 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.3-pcov amd64 1.0.6-3+ubuntu18.04.1+deb.sury.org+1 [15.3 kB]
default: Get:28 http://archive.ubuntu.com/ubuntu bionic/main amd64 liblqr-1-0 amd64 0.4.2-2.1 [27.7 kB]
default: Get:29 http://archive.ubuntu.com/ubuntu bionic/main amd64 libltdl7 amd64 2.4.6-2 [38.8 kB]
default: Get:30 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-pcov amd64 1.0.6-3+ubuntu18.04.1+deb.sury.org+1 [15.5 kB]
default: Get:31 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libtiff5 amd64 4.0.9-5ubuntu0.3 [153 kB]
default: Get:32 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 imagemagick-6-common all 8:6.9.7.4+dfsg-16ubuntu6.8 [60.0 kB]
default: Get:33 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.1-pcov amd64 1.0.6-3+ubuntu18.04.1+deb.sury.org+1 [14.4 kB]
default: Get:34 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmagickcore-6.q16-3 amd64 8:6.9.7.4+dfsg-16ubuntu6.8 [1616 kB]
default: Get:35 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php-pcov amd64 1.0.6-3+ubuntu18.04.1+deb.sury.org+1 [6160 B]
default: Get:36 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmagickwand-6.q16-3 amd64 8:6.9.7.4+dfsg-16ubuntu6.8 [294 kB]
default: Get:37 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libdbi-perl amd64 1.640-1ubuntu0.2 [724 kB]
default: Get:38 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libaio1 amd64 0.3.110-5ubuntu0.1 [6476 B]
default: Get:39 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-igbinary amd64 3.1.6+2.0.8-2+ubuntu18.04.1+deb.sury.org+4 [54.6 kB]
default: Get:40 http://archive.ubuntu.com/ubuntu bionic/main amd64 socat amd64 1.7.3.2-2ubuntu2 [342 kB]
default: Get:41 http://archive.ubuntu.com/ubuntu bionic/universe amd64 libopts25 amd64 1:5.18.12-4 [58.2 kB]
default: Get:42 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 ntp amd64 1:4.2.8p10+dfsg-5ubuntu7.3 [640 kB]
default: Get:43 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 ntpdate amd64 1:4.2.8p10+dfsg-5ubuntu7.3 [51.3 kB]
default: Get:44 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-imagick amd64 3.4.4-10+ubuntu18.04.1+deb.sury.org+4 [98.1 kB]
default: Get:45 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmemcached11 amd64 1.0.18-4.2ubuntu0.18.04.1 [83.2 kB]
default: Get:46 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libpython2.7-minimal amd64 2.7.17-1~18.04ubuntu1.2 [335 kB]
default: Get:47 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 python2.7-minimal amd64 2.7.17-1~18.04ubuntu1.2 [1290 kB]
default: Get:48 http://archive.ubuntu.com/ubuntu bionic/main amd64 python-minimal amd64 2.7.15~rc1-1 [28.1 kB]
default: Get:49 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libpython2.7-stdlib amd64 2.7.17-1~18.04ubuntu1.2 [1916 kB]
default: Get:50 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-memcache amd64 4.0.5.2+3.0.9~20170802.e702b5f9-2+ubuntu18.04.1+deb.sury.org+1 [49.1 kB]
default: Get:51 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 python2.7 amd64 2.7.17-1~18.04ubuntu1.2 [248 kB]
default: Get:52 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-msgpack amd64 2.1.1+0.5.7-2+ubuntu18.04.1+deb.sury.org+4 [29.9 kB]
default: Get:53 http://archive.ubuntu.com/ubuntu bionic/main amd64 libpython-stdlib amd64 2.7.15~rc1-1 [7620 B]
default: Get:54 http://archive.ubuntu.com/ubuntu bionic/main amd64 python amd64 2.7.15~rc1-1 [140 kB]
default: Get:55 http://archive.ubuntu.com/ubuntu bionic/universe amd64 libssh2-1 amd64 1.8.0-1 [73.2 kB]
default: Get:56 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 vim amd64 2:8.0.1453-1ubuntu1.4 [1152 kB]
default: Get:57 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-memcached amd64 3.1.5+2.2.0-4+ubuntu18.04.1+deb.sury.org+4 [42.7 kB]
default: Get:58 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 vim-tiny amd64 2:8.0.1453-1ubuntu1.4 [476 kB]
default: Get:59 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 vim-runtime all 2:8.0.1453-1ubuntu1.4 [5435 kB]
default: Get:60 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-xdebug amd64 2.9.8+2.8.1+2.5.5+3.0.0~beta1-2+ubuntu18.04.1+deb.sury.org+1 [419 kB]
default: Get:61 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 vim-common all 2:8.0.1453-1ubuntu1.4 [70.4 kB]
default: Get:62 http://archive.ubuntu.com/ubuntu bionic/main amd64 m4 amd64 1.4.18-1 [197 kB]
default: Get:63 http://archive.ubuntu.com/ubuntu bionic/main amd64 autoconf all 2.69-11 [322 kB]
default: Get:64 http://archive.ubuntu.com/ubuntu bionic/main amd64 autotools-dev all 20180224.1 [39.6 kB]
default: Get:65 http://archive.ubuntu.com/ubuntu bionic/main amd64 automake all 1:1.15.1-3ubuntu2 [509 kB]
default: Get:66 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-yaml amd64 2.2.0~b2+2.1.0+2.0.4+1.3.2-1+ubuntu18.04.1+deb.sury.org+1 [20.4 kB]
default: Get:67 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 binutils-common amd64 2.30-21ubuntu1~18.04.4 [196 kB]
default: Get:68 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libbinutils amd64 2.30-21ubuntu1~18.04.4 [488 kB]
default: Get:69 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 binutils-x86-64-linux-gnu amd64 2.30-21ubuntu1~18.04.4 [1839 kB]
default: Get:70 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-ssh2 amd64 1.2+0.13-3+ubuntu18.04.1+deb.sury.org+1 [29.6 kB]
default: Get:71 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 binutils amd64 2.30-21ubuntu1~18.04.4 [3392 B]
default: Get:72 http://archive.ubuntu.com/ubuntu bionic/universe amd64 colordiff all 1.0.18-1 [13.2 kB]
default: Get:73 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic/main amd64 git amd64 1:2.29.2-0ppa1~ubuntu18.04.1 [5330 kB]
default: Get:74 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc-7-base amd64 7.5.0-3ubuntu1~18.04 [18.3 kB]
default: Get:75 http://archive.ubuntu.com/ubuntu bionic/main amd64 libisl19 amd64 0.19-1 [551 kB]
default: Get:76 http://archive.ubuntu.com/ubuntu bionic/main amd64 libmpc3 amd64 1.1.0-1 [40.8 kB]
default: Get:77 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 cpp-7 amd64 7.5.0-3ubuntu1~18.04 [8591 kB]
default: Get:78 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 cpp amd64 4:7.4.0-1ubuntu2.3 [27.7 kB]
default: Get:79 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libdpkg-perl all 1.19.0.5ubuntu2.3 [211 kB]
default: Get:80 http://archive.ubuntu.com/ubuntu bionic/main amd64 make amd64 4.1-9.1ubuntu1 [154 kB]
default: Get:81 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 dpkg-dev all 1.19.0.5ubuntu2.3 [607 kB]
default: Get:82 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libcc1-0 amd64 8.4.0-1ubuntu1~18.04 [39.4 kB]
default: Get:83 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic/main amd64 git-man all 1:2.29.2-0ppa1~ubuntu18.04.1 [1807 kB]
default: Get:84 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libitm1 amd64 8.4.0-1ubuntu1~18.04 [27.9 kB]
default: Get:85 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libatomic1 amd64 8.4.0-1ubuntu1~18.04 [9192 B]
default: Get:86 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libasan4 amd64 7.5.0-3ubuntu1~18.04 [358 kB]
default: Get:87 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 liblsan0 amd64 8.4.0-1ubuntu1~18.04 [133 kB]
default: Get:88 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libtsan0 amd64 8.4.0-1ubuntu1~18.04 [288 kB]
default: Get:89 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libubsan0 amd64 7.5.0-3ubuntu1~18.04 [126 kB]
default: Get:90 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libcilkrts5 amd64 7.5.0-3ubuntu1~18.04 [42.5 kB]
default: Get:91 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmpx2 amd64 8.4.0-1ubuntu1~18.04 [11.6 kB]
default: Get:92 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libquadmath0 amd64 8.4.0-1ubuntu1~18.04 [134 kB]
default: Get:93 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgcc-7-dev amd64 7.5.0-3ubuntu1~18.04 [2378 kB]
default: Get:94 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libpcre2-8-0 amd64 10.35-5+ubuntu18.04.1+deb.sury.org+1 [202 kB]
default: Get:95 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc-7 amd64 7.5.0-3ubuntu1~18.04 [9381 kB]
default: Get:96 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic/main amd64 git-svn all 1:2.29.2-0ppa1~ubuntu18.04.1 [967 kB]
default: Get:97 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 gcc amd64 4:7.4.0-1ubuntu2.3 [5184 B]
default: Get:98 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libc-dev-bin amd64 2.27-3ubuntu1.3 [71.8 kB]
default: Get:99 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 linux-libc-dev amd64 4.15.0-122.124 [998 kB]
default: Get:100 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libc6-dev amd64 2.27-3ubuntu1.3 [2586 kB]
default: Get:101 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libstdc++-7-dev amd64 7.5.0-3ubuntu1~18.04 [1471 kB]
default: Get:102 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 g++-7 amd64 7.5.0-3ubuntu1~18.04 [9697 kB]
default: Get:103 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libargon2-1 amd64 0~20190702-0.1+ubuntu18.04.1+deb.sury.org+1 [20.4 kB]
default: Get:104 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 g++ amd64 4:7.4.0-1ubuntu2.3 [1568 B]
default: Get:105 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libgd3 amd64 2.3.0-2+ubuntu18.04.1+deb.sury.org+1 [136 kB]
default: Get:106 http://archive.ubuntu.com/ubuntu bionic/main amd64 libcroco3 amd64 0.6.12-2 [81.3 kB]
default: Get:107 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 gettext amd64 0.19.8.1-6ubuntu0.3 [1293 kB]
default: Get:108 http://archive.ubuntu.com/ubuntu bionic/main amd64 libapr1 amd64 1.6.3-2 [90.9 kB]
default: Get:109 http://archive.ubuntu.com/ubuntu bionic/main amd64 libaprutil1 amd64 1.6.1-2 [84.4 kB]
default: Get:110 http://archive.ubuntu.com/ubuntu bionic/universe amd64 libserf-1-1 amd64 1.3.9-6 [44.4 kB]
default: Get:111 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libicu65 amd64 65.1-1+ubuntu18.04.1+deb.sury.org+1 [8467 kB]
default: Get:112 http://archive.ubuntu.com/ubuntu bionic/universe amd64 libsvn1 amd64 1.9.7-4ubuntu1 [1183 kB]
default: Get:113 http://archive.ubuntu.com/ubuntu bionic/universe amd64 libsvn-perl amd64 1.9.7-4ubuntu1 [855 kB]
default: Get:114 http://archive.ubuntu.com/ubuntu bionic/main amd64 libyaml-perl all 1.24-1 [56.4 kB]
default: Get:115 http://archive.ubuntu.com/ubuntu bionic/universe amd64 libterm-readkey-perl amd64 2.37-1build1 [24.4 kB]
default: Get:116 http://archive.ubuntu.com/ubuntu bionic/main amd64 hicolor-icon-theme all 0.17-2 [9976 B]
default: Get:117 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 imagemagick-6.q16 amd64 8:6.9.7.4+dfsg-16ubuntu6.8 [423 kB]
default: Get:118 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 imagemagick amd64 8:6.9.7.4+dfsg-16ubuntu6.8 [14.2 kB]
default: Get:119 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 lftp amd64 4.8.1-1ubuntu0.1 [560 kB]
default: Get:120 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 mlock amd64 8:2007f~dfsg-5ubuntu0.18.04.2 [11.6 kB]
default: Get:121 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 libc-client2007e amd64 8:2007f~dfsg-5ubuntu0.18.04.2 [582 kB]
default: Get:122 http://archive.ubuntu.com/ubuntu bionic/main amd64 libwebp6 amd64 0.6.1-2 [185 kB]
default: Get:123 http://archive.ubuntu.com/ubuntu bionic/main amd64 libxpm4 amd64 1:3.5.12-1 [34.0 kB]
default: Get:124 http://archive.ubuntu.com/ubuntu bionic/main amd64 libnet1 amd64 1.1.6+dfsg-3.1 [42.9 kB]
default: Get:125 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libpcre16-3 amd64 2:8.44-2+ubuntu18.04.1+deb.sury.org+1 [156 kB]
default: Get:126 http://archive.ubuntu.com/ubuntu bionic/main amd64 libtool all 2.4.6-2 [194 kB]
default: Get:127 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 memcached amd64 1.5.6-0ubuntu1.2 [109 kB]
default: Get:128 http://archive.ubuntu.com/ubuntu bionic/universe amd64 ngrep amd64 1.47+ds1-1 [32.5 kB]
default: Get:129 http://archive.ubuntu.com/ubuntu bionic/main amd64 pkg-config amd64 0.29.1-0ubuntu2 [45.0 kB]
default: Get:130 http://archive.ubuntu.com/ubuntu bionic/main amd64 shtool all 2.0.8-9 [121 kB]
default: Get:131 http://archive.ubuntu.com/ubuntu bionic/main amd64 ssl-cert all 1.0.39 [17.0 kB]
default: Get:132 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libpcre32-3 amd64 2:8.44-2+ubuntu18.04.1+deb.sury.org+1 [147 kB]
default: Get:133 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 postfix amd64 3.3.0-1ubuntu0.3 [1148 kB]
default: Get:134 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 python-pip-whl all 9.0.1-2.3~ubuntu1.18.04.4 [1653 kB]
default: Get:135 http://archive.ubuntu.com/ubuntu bionic-updates/universe amd64 python-pip all 9.0.1-2.3~ubuntu1.18.04.4 [151 kB]
default: Get:136 http://archive.ubuntu.com/ubuntu bionic/main amd64 python-pkg-resources all 39.0.1-2 [128 kB]
default: Get:137 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libpcrecpp0v5 amd64 2:8.44-2+ubuntu18.04.1+deb.sury.org+1 [50.8 kB]
default: Get:138 http://archive.ubuntu.com/ubuntu bionic/main amd64 python-setuptools all 39.0.1-2 [329 kB]
default: Get:139 http://archive.ubuntu.com/ubuntu bionic/universe amd64 subversion amd64 1.9.7-4ubuntu1 [834 kB]
default: Get:140 http://archive.ubuntu.com/ubuntu bionic/main amd64 unzip amd64 6.0-21ubuntu1 [167 kB]
default: Get:141 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libpcre3-dev amd64 2:8.44-2+ubuntu18.04.1+deb.sury.org+1 [548 kB]
default: Get:142 http://archive.ubuntu.com/ubuntu bionic/main amd64 zip amd64 3.0-11build1 [167 kB]
default: Get:143 http://archive.ubuntu.com/ubuntu bionic/universe amd64 dos2unix amd64 7.3.4-3 [351 kB]
default: Get:144 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libsodium23 amd64 1.0.18-1+ubuntu18.04.1+deb.sury.org+1 [150 kB]
default: Get:145 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libssl-dev amd64 1.1.1g-1+ubuntu18.04.1+deb.sury.org+1 [1797 kB]
default: Get:146 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 libzip4 amd64 1.7.3-1+ubuntu18.04.1+deb.sury.org+2 [54.7 kB]
default: Get:147 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-common amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [931 kB]
default: Get:148 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-json amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [18.9 kB]
default: Get:149 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-opcache amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [165 kB]
default: Get:150 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-readline amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [12.2 kB]
default: Get:151 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-cli amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [1407 kB]
default: Get:152 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-xml amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [108 kB]
default: Get:153 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php-pear all 1:1.10.12+submodules+notgz-1+ubuntu18.04.1+deb.sury.org+1 [289 kB]
default: Get:154 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-bcmath amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [15.3 kB]
default: Get:155 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-curl amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [28.8 kB]
default: Get:156 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-dev amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [419 kB]
default: Get:157 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-fpm amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [1412 kB]
default: Get:158 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-gd amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [27.2 kB]
default: Get:159 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-imap amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [29.2 kB]
default: Get:160 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-intl amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [125 kB]
default: Get:161 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-mbstring amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [484 kB]
default: Get:162 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-mysql amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [117 kB]
default: Get:163 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-soap amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [113 kB]
default: Get:164 http://ppa.launchpad.net/ondrej/php/ubuntu bionic/main amd64 php7.2-zip amd64 7.2.34-8+ubuntu18.04.1+deb.sury.org+1 [20.8 kB]
default: dpkg-preconfigure: unable to re-open stdin: No such file or directory
default: Fetched 148 MB in 30s (4957 kB/s)
default: (Reading database ...
(Reading database ... 55%abase ... 5%
default: (Reading database ... 60%
default: (Reading database ... 65%
default: (Reading database ... 70%
default: (Reading database ... 75%
default: (Reading database ... 80%
default: (Reading database ... 85%
default: (Reading database ... 90%
default: (Reading database ... 95%
(Reading database ... 59822 files and directories currently installed.)
default: Preparing to unpack .../libc6_2.27-3ubuntu1.3_amd64.deb ...
default: Unpacking libc6:amd64 (2.27-3ubuntu1.3) over (2.27-3ubuntu1.2) ...
default: Setting up libc6:amd64 (2.27-3ubuntu1.3) ...
default: Selecting previously unselected package libjpeg-turbo8:amd64.
default: (Reading database ...
(Reading database ... 55%abase ... 5%
default: (Reading database ... 60%
default: (Reading database ... 65%
default: (Reading database ... 70%
default: (Reading database ... 75%
default: (Reading database ... 80%
default: (Reading database ... 85%
default: (Reading database ... 90%
default: (Reading database ... 95%
(Reading database ... 59822 files and directories currently installed.)
default: Preparing to unpack .../00-libjpeg-turbo8_1.5.2-0ubuntu5.18.04.4_amd64.deb ...
default: Unpacking libjpeg-turbo8:amd64 (1.5.2-0ubuntu5.18.04.4) ...
default: Selecting previously unselected package libgomp1:amd64.
default: Preparing to unpack .../01-libgomp1_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libgomp1:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libfftw3-double3:amd64.
default: Preparing to unpack .../02-libfftw3-double3_3.3.7-1_amd64.deb ...
default: Unpacking libfftw3-double3:amd64 (3.3.7-1) ...
default: Selecting previously unselected package fonts-dejavu-core.
default: Preparing to unpack .../03-fonts-dejavu-core_2.37-1_all.deb ...
default: Unpacking fonts-dejavu-core (2.37-1) ...
default: Selecting previously unselected package fontconfig-config.
default: Preparing to unpack .../04-fontconfig-config_2.12.6-0ubuntu2_all.deb ...
default: Unpacking fontconfig-config (2.12.6-0ubuntu2) ...
default: Selecting previously unselected package libfontconfig1:amd64.
default: Preparing to unpack .../05-libfontconfig1_2.12.6-0ubuntu2_amd64.deb ...
default: Unpacking libfontconfig1:amd64 (2.12.6-0ubuntu2) ...
default: Selecting previously unselected package libjbig0:amd64.
default: Preparing to unpack .../06-libjbig0_2.1-3.1build1_amd64.deb ...
default: Unpacking libjbig0:amd64 (2.1-3.1build1) ...
default: Selecting previously unselected package libjpeg8:amd64.
default: Preparing to unpack .../07-libjpeg8_8c-2ubuntu8_amd64.deb ...
default: Unpacking libjpeg8:amd64 (8c-2ubuntu8) ...
default: Selecting previously unselected package liblcms2-2:amd64.
default: Preparing to unpack .../08-liblcms2-2_2.9-1ubuntu0.1_amd64.deb ...
default: Unpacking liblcms2-2:amd64 (2.9-1ubuntu0.1) ...
default: Selecting previously unselected package liblqr-1-0:amd64.
default: Preparing to unpack .../09-liblqr-1-0_0.4.2-2.1_amd64.deb ...
default: Unpacking liblqr-1-0:amd64 (0.4.2-2.1) ...
default: Selecting previously unselected package libltdl7:amd64.
default: Preparing to unpack .../10-libltdl7_2.4.6-2_amd64.deb ...
default: Unpacking libltdl7:amd64 (2.4.6-2) ...
default: Selecting previously unselected package libtiff5:amd64.
default: Preparing to unpack .../11-libtiff5_4.0.9-5ubuntu0.3_amd64.deb ...
default: Unpacking libtiff5:amd64 (4.0.9-5ubuntu0.3) ...
default: Selecting previously unselected package imagemagick-6-common.
default: Preparing to unpack .../12-imagemagick-6-common_8%3a6.9.7.4+dfsg-16ubuntu6.8_all.deb ...
default: Unpacking imagemagick-6-common (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Selecting previously unselected package libmagickcore-6.q16-3:amd64.
default: Preparing to unpack .../13-libmagickcore-6.q16-3_8%3a6.9.7.4+dfsg-16ubuntu6.8_amd64.deb ...
default: Unpacking libmagickcore-6.q16-3:amd64 (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Selecting previously unselected package libmagickwand-6.q16-3:amd64.
default: Preparing to unpack .../14-libmagickwand-6.q16-3_8%3a6.9.7.4+dfsg-16ubuntu6.8_amd64.deb ...
default: Unpacking libmagickwand-6.q16-3:amd64 (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Selecting previously unselected package mysql-common.
default: Preparing to unpack .../15-mysql-common_1%3a10.4.16+maria~bionic_all.deb ...
default: Unpacking mysql-common (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package mariadb-common.
default: Preparing to unpack .../16-mariadb-common_1%3a10.4.16+maria~bionic_all.deb ...
default: Unpacking mariadb-common (1:10.4.16+maria~bionic) ...
default: Preparing to unpack .../17-libssl1.1_1.1.1g-1+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libssl1.1:amd64 (1.1.1g-1+ubuntu18.04.1+deb.sury.org+1) over (1.1.1-1ubuntu2.1~18.04.6) ...
default: Selecting previously unselected package galera-4.
default: Preparing to unpack .../18-galera-4_26.4.6-bionic_amd64.deb ...
default: Unpacking galera-4 (26.4.6-bionic) ...
default: Selecting previously unselected package libdbi-perl.
default: Preparing to unpack .../19-libdbi-perl_1.640-1ubuntu0.2_amd64.deb ...
default: Unpacking libdbi-perl (1.640-1ubuntu0.2) ...
default: Selecting previously unselected package libmariadb3:amd64.
default: Preparing to unpack .../20-libmariadb3_1%3a10.4.16+maria~bionic_amd64.deb ...
default: Unpacking libmariadb3:amd64 (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package mariadb-client-core-10.4.
default: Preparing to unpack .../21-mariadb-client-core-10.4_1%3a10.4.16+maria~bionic_amd64.deb ...
default: Unpacking mariadb-client-core-10.4 (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package mariadb-client-10.4.
default: Preparing to unpack .../22-mariadb-client-10.4_1%3a10.4.16+maria~bionic_amd64.deb ...
default: Unpacking mariadb-client-10.4 (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package libaio1:amd64.
default: Preparing to unpack .../23-libaio1_0.3.110-5ubuntu0.1_amd64.deb ...
default: Unpacking libaio1:amd64 (0.3.110-5ubuntu0.1) ...
default: Preparing to unpack .../24-libpcre3_2%3a8.44-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libpcre3:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) over (2:8.39-9) ...
default: Setting up libpcre3:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package mariadb-server-core-10.4.
default: (Reading database ...
(Reading database ... 60%abase ... 5%
default: (Reading database ... 65%
default: (Reading database ... 70%
default: (Reading database ... 75%
default: (Reading database ... 80%
default: (Reading database ... 85%
default: (Reading database ... 90%
default: (Reading database ... 95%
(Reading database ... 60537 files and directories currently installed.)
default: Preparing to unpack .../mariadb-server-core-10.4_1%3a10.4.16+maria~bionic_amd64.deb ...
default: Unpacking mariadb-server-core-10.4 (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package socat.
default: Preparing to unpack .../socat_1.7.3.2-2ubuntu2_amd64.deb ...
default: Unpacking socat (1.7.3.2-2ubuntu2) ...
default: Setting up mysql-common (1:10.4.16+maria~bionic) ...
default: Setting up mariadb-common (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package mariadb-server-10.4.
default: (Reading database ...
(Reading database ... 60%abase ... 5%
default: (Reading database ... 65%
default: (Reading database ... 70%
default: (Reading database ... 75%
default: (Reading database ... 80%
default: (Reading database ... 85%
default: (Reading database ... 90%
default: (Reading database ... 95%
(Reading database ... 60670 files and directories currently installed.)
default: Preparing to unpack .../mariadb-server-10.4_1%3a10.4.16+maria~bionic_amd64.deb ...
default: Unpacking mariadb-server-10.4 (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package libopts25:amd64.
default: Preparing to unpack .../libopts25_1%3a5.18.12-4_amd64.deb ...
default: Unpacking libopts25:amd64 (1:5.18.12-4) ...
default: Selecting previously unselected package ntp.
default: Preparing to unpack .../ntp_1%3a4.2.8p10+dfsg-5ubuntu7.3_amd64.deb ...
default: Unpacking ntp (1:4.2.8p10+dfsg-5ubuntu7.3) ...
default: Selecting previously unselected package ntpdate.
default: Preparing to unpack .../ntpdate_1%3a4.2.8p10+dfsg-5ubuntu7.3_amd64.deb ...
default: Unpacking ntpdate (1:4.2.8p10+dfsg-5ubuntu7.3) ...
default: Selecting previously unselected package php-common.
default: Preparing to unpack .../php-common_2%3a79+ubuntu18.04.1+deb.sury.org+4_all.deb ...
default: Unpacking php-common (2:79+ubuntu18.04.1+deb.sury.org+4) ...
default: Setting up php-common (2:79+ubuntu18.04.1+deb.sury.org+4) ...
default: Created symlink /etc/systemd/system/timers.target.wants/phpsessionclean.timer → /lib/systemd/system/phpsessionclean.timer.
default: Selecting previously unselected package php7.4-pcov.
default: (Reading database ...
(Reading database ... 60%abase ... 5%
default: (Reading database ... 65%
default: (Reading database ... 70%
default: (Reading database ... 75%
default: (Reading database ... 80%
default: (Reading database ... 85%
default: (Reading database ... 90%
default: (Reading database ... 95%
(Reading database ... 60907 files and directories currently installed.)
default: Preparing to unpack .../00-php7.4-pcov_1.0.6-3+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: find: ‘/etc/php’
default: : No such file or directory
default: Unpacking php7.4-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.3-pcov.
default: Preparing to unpack .../01-php7.3-pcov_1.0.6-3+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.3-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-pcov.
default: Preparing to unpack .../02-php7.2-pcov_1.0.6-3+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.1-pcov.
default: Preparing to unpack .../03-php7.1-pcov_1.0.6-3+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.1-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php-pcov.
default: Preparing to unpack .../04-php-pcov_1.0.6-3+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-igbinary.
default: Preparing to unpack .../05-php7.2-igbinary_3.1.6+2.0.8-2+ubuntu18.04.1+deb.sury.org+4_amd64.deb ...
default: Unpacking php7.2-igbinary (3.1.6+2.0.8-2+ubuntu18.04.1+deb.sury.org+4) ...
default: Selecting previously unselected package php7.2-imagick.
default: Preparing to unpack .../06-php7.2-imagick_3.4.4-10+ubuntu18.04.1+deb.sury.org+4_amd64.deb ...
default: Unpacking php7.2-imagick (3.4.4-10+ubuntu18.04.1+deb.sury.org+4) ...
default: Selecting previously unselected package php7.2-memcache.
default: Preparing to unpack .../07-php7.2-memcache_4.0.5.2+3.0.9~20170802.e702b5f9-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-memcache (4.0.5.2+3.0.9~20170802.e702b5f9-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-msgpack.
default: Preparing to unpack .../08-php7.2-msgpack_2.1.1+0.5.7-2+ubuntu18.04.1+deb.sury.org+4_amd64.deb ...
default: Unpacking php7.2-msgpack (2.1.1+0.5.7-2+ubuntu18.04.1+deb.sury.org+4) ...
default: Selecting previously unselected package libmemcached11:amd64.
default: Preparing to unpack .../09-libmemcached11_1.0.18-4.2ubuntu0.18.04.1_amd64.deb ...
default: Unpacking libmemcached11:amd64 (1.0.18-4.2ubuntu0.18.04.1) ...
default: Selecting previously unselected package php7.2-memcached.
default: Preparing to unpack .../10-php7.2-memcached_3.1.5+2.2.0-4+ubuntu18.04.1+deb.sury.org+4_amd64.deb ...
default: Unpacking php7.2-memcached (3.1.5+2.2.0-4+ubuntu18.04.1+deb.sury.org+4) ...
default: Selecting previously unselected package php7.2-xdebug.
default: Preparing to unpack .../11-php7.2-xdebug_2.9.8+2.8.1+2.5.5+3.0.0~beta1-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-xdebug (2.9.8+2.8.1+2.5.5+3.0.0~beta1-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-yaml.
default: Preparing to unpack .../12-php7.2-yaml_2.2.0~b2+2.1.0+2.0.4+1.3.2-1+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-yaml (2.2.0~b2+2.1.0+2.0.4+1.3.2-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libpython2.7-minimal:amd64.
default: Preparing to unpack .../13-libpython2.7-minimal_2.7.17-1~18.04ubuntu1.2_amd64.deb ...
default: Unpacking libpython2.7-minimal:amd64 (2.7.17-1~18.04ubuntu1.2) ...
default: Selecting previously unselected package python2.7-minimal.
default: Preparing to unpack .../14-python2.7-minimal_2.7.17-1~18.04ubuntu1.2_amd64.deb ...
default: Unpacking python2.7-minimal (2.7.17-1~18.04ubuntu1.2) ...
default: Selecting previously unselected package python-minimal.
default: Preparing to unpack .../15-python-minimal_2.7.15~rc1-1_amd64.deb ...
default: Unpacking python-minimal (2.7.15~rc1-1) ...
default: Selecting previously unselected package libpython2.7-stdlib:amd64.
default: Preparing to unpack .../16-libpython2.7-stdlib_2.7.17-1~18.04ubuntu1.2_amd64.deb ...
default: Unpacking libpython2.7-stdlib:amd64 (2.7.17-1~18.04ubuntu1.2) ...
default: Selecting previously unselected package python2.7.
default: Preparing to unpack .../17-python2.7_2.7.17-1~18.04ubuntu1.2_amd64.deb ...
default: Unpacking python2.7 (2.7.17-1~18.04ubuntu1.2) ...
default: Selecting previously unselected package libpython-stdlib:amd64.
default: Preparing to unpack .../18-libpython-stdlib_2.7.15~rc1-1_amd64.deb ...
default: Unpacking libpython-stdlib:amd64 (2.7.15~rc1-1) ...
default: Setting up libpython2.7-minimal:amd64 (2.7.17-1~18.04ubuntu1.2) ...
default: Setting up python2.7-minimal (2.7.17-1~18.04ubuntu1.2) ...
default: Linking and byte-compiling packages for runtime python2.7...
default: Setting up python-minimal (2.7.15~rc1-1) ...
default: Selecting previously unselected package python.
default: (Reading database ...
(Reading database ... 60%abase ... 5%
default: (Reading database ... 65%
default: (Reading database ... 70%
default: (Reading database ... 75%
default: (Reading database ... 80%
default: (Reading database ... 85%
default: (Reading database ... 90%
default: (Reading database ... 95%
(Reading database ... 61753 files and directories currently installed.)
default: Preparing to unpack .../000-python_2.7.15~rc1-1_amd64.deb ...
default: Unpacking python (2.7.15~rc1-1) ...
default: Selecting previously unselected package libssh2-1:amd64.
default: Preparing to unpack .../001-libssh2-1_1.8.0-1_amd64.deb ...
default: Unpacking libssh2-1:amd64 (1.8.0-1) ...
default: Selecting previously unselected package php7.2-ssh2.
default: Preparing to unpack .../002-php7.2-ssh2_1.2+0.13-3+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-ssh2 (1.2+0.13-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Preparing to unpack .../003-vim_2%3a8.0.1453-1ubuntu1.4_amd64.deb ...
default: Unpacking vim (2:8.0.1453-1ubuntu1.4) over (2:8.0.1453-1ubuntu1.3) ...
default: Preparing to unpack .../004-vim-tiny_2%3a8.0.1453-1ubuntu1.4_amd64.deb ...
default: Unpacking vim-tiny (2:8.0.1453-1ubuntu1.4) over (2:8.0.1453-1ubuntu1.3) ...
default: Preparing to unpack .../005-vim-runtime_2%3a8.0.1453-1ubuntu1.4_all.deb ...
default: Unpacking vim-runtime (2:8.0.1453-1ubuntu1.4) over (2:8.0.1453-1ubuntu1.3) ...
default: Preparing to unpack .../006-vim-common_2%3a8.0.1453-1ubuntu1.4_all.deb ...
default: Unpacking vim-common (2:8.0.1453-1ubuntu1.4) over (2:8.0.1453-1ubuntu1.3) ...
default: Selecting previously unselected package m4.
default: Preparing to unpack .../007-m4_1.4.18-1_amd64.deb ...
default: Unpacking m4 (1.4.18-1) ...
default: Selecting previously unselected package autoconf.
default: Preparing to unpack .../008-autoconf_2.69-11_all.deb ...
default: Unpacking autoconf (2.69-11) ...
default: Selecting previously unselected package autotools-dev.
default: Preparing to unpack .../009-autotools-dev_20180224.1_all.deb ...
default: Unpacking autotools-dev (20180224.1) ...
default: Selecting previously unselected package automake.
default: Preparing to unpack .../010-automake_1%3a1.15.1-3ubuntu2_all.deb ...
default: Unpacking automake (1:1.15.1-3ubuntu2) ...
default: Selecting previously unselected package binutils-common:amd64.
default: Preparing to unpack .../011-binutils-common_2.30-21ubuntu1~18.04.4_amd64.deb ...
default: Unpacking binutils-common:amd64 (2.30-21ubuntu1~18.04.4) ...
default: Selecting previously unselected package libbinutils:amd64.
default: Preparing to unpack .../012-libbinutils_2.30-21ubuntu1~18.04.4_amd64.deb ...
default: Unpacking libbinutils:amd64 (2.30-21ubuntu1~18.04.4) ...
default: Selecting previously unselected package binutils-x86-64-linux-gnu.
default: Preparing to unpack .../013-binutils-x86-64-linux-gnu_2.30-21ubuntu1~18.04.4_amd64.deb ...
default: Unpacking binutils-x86-64-linux-gnu (2.30-21ubuntu1~18.04.4) ...
default: Selecting previously unselected package binutils.
default: Preparing to unpack .../014-binutils_2.30-21ubuntu1~18.04.4_amd64.deb ...
default: Unpacking binutils (2.30-21ubuntu1~18.04.4) ...
default: Selecting previously unselected package colordiff.
default: Preparing to unpack .../015-colordiff_1.0.18-1_all.deb ...
default: Unpacking colordiff (1.0.18-1) ...
default: Selecting previously unselected package gcc-7-base:amd64.
default: Preparing to unpack .../016-gcc-7-base_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking gcc-7-base:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package libisl19:amd64.
default: Preparing to unpack .../017-libisl19_0.19-1_amd64.deb ...
default: Unpacking libisl19:amd64 (0.19-1) ...
default: Selecting previously unselected package libmpc3:amd64.
default: Preparing to unpack .../018-libmpc3_1.1.0-1_amd64.deb ...
default: Unpacking libmpc3:amd64 (1.1.0-1) ...
default: Selecting previously unselected package cpp-7.
default: Preparing to unpack .../019-cpp-7_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking cpp-7 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package cpp.
default: Preparing to unpack .../020-cpp_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
default: Unpacking cpp (4:7.4.0-1ubuntu2.3) ...
default: Selecting previously unselected package libdpkg-perl.
default: Preparing to unpack .../021-libdpkg-perl_1.19.0.5ubuntu2.3_all.deb ...
default: Unpacking libdpkg-perl (1.19.0.5ubuntu2.3) ...
default: Selecting previously unselected package make.
default: Preparing to unpack .../022-make_4.1-9.1ubuntu1_amd64.deb ...
default: Unpacking make (4.1-9.1ubuntu1) ...
default: Selecting previously unselected package dpkg-dev.
default: Preparing to unpack .../023-dpkg-dev_1.19.0.5ubuntu2.3_all.deb ...
default: Unpacking dpkg-dev (1.19.0.5ubuntu2.3) ...
default: Selecting previously unselected package libcc1-0:amd64.
default: Preparing to unpack .../024-libcc1-0_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libcc1-0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libitm1:amd64.
default: Preparing to unpack .../025-libitm1_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libitm1:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libatomic1:amd64.
default: Preparing to unpack .../026-libatomic1_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libatomic1:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libasan4:amd64.
default: Preparing to unpack .../027-libasan4_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking libasan4:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package liblsan0:amd64.
default: Preparing to unpack .../028-liblsan0_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking liblsan0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libtsan0:amd64.
default: Preparing to unpack .../029-libtsan0_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libtsan0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libubsan0:amd64.
default: Preparing to unpack .../030-libubsan0_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking libubsan0:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package libcilkrts5:amd64.
default: Preparing to unpack .../031-libcilkrts5_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking libcilkrts5:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package libmpx2:amd64.
default: Preparing to unpack .../032-libmpx2_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libmpx2:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libquadmath0:amd64.
default: Preparing to unpack .../033-libquadmath0_8.4.0-1ubuntu1~18.04_amd64.deb ...
default: Unpacking libquadmath0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Selecting previously unselected package libgcc-7-dev:amd64.
default: Preparing to unpack .../034-libgcc-7-dev_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking libgcc-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package gcc-7.
default: Preparing to unpack .../035-gcc-7_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking gcc-7 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package gcc.
default: Preparing to unpack .../036-gcc_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
default: Unpacking gcc (4:7.4.0-1ubuntu2.3) ...
default: Selecting previously unselected package libc-dev-bin.
default: Preparing to unpack .../037-libc-dev-bin_2.27-3ubuntu1.3_amd64.deb ...
default: Unpacking libc-dev-bin (2.27-3ubuntu1.3) ...
default: Selecting previously unselected package linux-libc-dev:amd64.
default: Preparing to unpack .../038-linux-libc-dev_4.15.0-122.124_amd64.deb ...
default: Unpacking linux-libc-dev:amd64 (4.15.0-122.124) ...
default: Selecting previously unselected package libc6-dev:amd64.
default: Preparing to unpack .../039-libc6-dev_2.27-3ubuntu1.3_amd64.deb ...
default: Unpacking libc6-dev:amd64 (2.27-3ubuntu1.3) ...
default: Selecting previously unselected package libstdc++-7-dev:amd64.
default: Preparing to unpack .../040-libstdc++-7-dev_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking libstdc++-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package g++-7.
default: Preparing to unpack .../041-g++-7_7.5.0-3ubuntu1~18.04_amd64.deb ...
default: Unpacking g++-7 (7.5.0-3ubuntu1~18.04) ...
default: Selecting previously unselected package g++.
default: Preparing to unpack .../042-g++_4%3a7.4.0-1ubuntu2.3_amd64.deb ...
default: Unpacking g++ (4:7.4.0-1ubuntu2.3) ...
default: Selecting previously unselected package libcroco3:amd64.
default: Preparing to unpack .../043-libcroco3_0.6.12-2_amd64.deb ...
default: Unpacking libcroco3:amd64 (0.6.12-2) ...
default: Selecting previously unselected package gettext.
default: Preparing to unpack .../044-gettext_0.19.8.1-6ubuntu0.3_amd64.deb ...
default: Unpacking gettext (0.19.8.1-6ubuntu0.3) ...
default: Preparing to unpack .../045-git_1%3a2.29.2-0ppa1~ubuntu18.04.1_amd64.deb ...
default: Unpacking git (1:2.29.2-0ppa1~ubuntu18.04.1) over (1:2.17.1-1ubuntu0.7) ...
default: Preparing to unpack .../046-git-man_1%3a2.29.2-0ppa1~ubuntu18.04.1_all.deb ...
default: Unpacking git-man (1:2.29.2-0ppa1~ubuntu18.04.1) over (1:2.17.1-1ubuntu0.7) ...
default: Selecting previously unselected package libpcre2-8-0:amd64.
default: Preparing to unpack .../047-libpcre2-8-0_10.35-5+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libpcre2-8-0:amd64 (10.35-5+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package git-lfs.
default: Preparing to unpack .../048-git-lfs_2.12.1_amd64.deb ...
default: Unpacking git-lfs (2.12.1) ...
default: Selecting previously unselected package libapr1:amd64.
default: Preparing to unpack .../049-libapr1_1.6.3-2_amd64.deb ...
default: Unpacking libapr1:amd64 (1.6.3-2) ...
default: Selecting previously unselected package libaprutil1:amd64.
default: Preparing to unpack .../050-libaprutil1_1.6.1-2_amd64.deb ...
default: Unpacking libaprutil1:amd64 (1.6.1-2) ...
default: Selecting previously unselected package libserf-1-1:amd64.
default: Preparing to unpack .../051-libserf-1-1_1.3.9-6_amd64.deb ...
default: Unpacking libserf-1-1:amd64 (1.3.9-6) ...
default: Selecting previously unselected package libsvn1:amd64.
default: Preparing to unpack .../052-libsvn1_1.9.7-4ubuntu1_amd64.deb ...
default: Unpacking libsvn1:amd64 (1.9.7-4ubuntu1) ...
default: Selecting previously unselected package libsvn-perl.
default: Preparing to unpack .../053-libsvn-perl_1.9.7-4ubuntu1_amd64.deb ...
default: Unpacking libsvn-perl (1.9.7-4ubuntu1) ...
default: Selecting previously unselected package libyaml-perl.
default: Preparing to unpack .../054-libyaml-perl_1.24-1_all.deb ...
default: Unpacking libyaml-perl (1.24-1) ...
default: Selecting previously unselected package libterm-readkey-perl.
default: Preparing to unpack .../055-libterm-readkey-perl_2.37-1build1_amd64.deb ...
default: Unpacking libterm-readkey-perl (2.37-1build1) ...
default: Selecting previously unselected package git-svn.
default: Preparing to unpack .../056-git-svn_1%3a2.29.2-0ppa1~ubuntu18.04.1_all.deb ...
default: Unpacking git-svn (1:2.29.2-0ppa1~ubuntu18.04.1) ...
default: Selecting previously unselected package hicolor-icon-theme.
default: Preparing to unpack .../057-hicolor-icon-theme_0.17-2_all.deb ...
default: Unpacking hicolor-icon-theme (0.17-2) ...
default: Selecting previously unselected package imagemagick-6.q16.
default: Preparing to unpack .../058-imagemagick-6.q16_8%3a6.9.7.4+dfsg-16ubuntu6.8_amd64.deb ...
default: Unpacking imagemagick-6.q16 (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Selecting previously unselected package imagemagick.
default: Preparing to unpack .../059-imagemagick_8%3a6.9.7.4+dfsg-16ubuntu6.8_amd64.deb ...
default: Unpacking imagemagick (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Selecting previously unselected package lftp.
default: Preparing to unpack .../060-lftp_4.8.1-1ubuntu0.1_amd64.deb ...
default: Unpacking lftp (4.8.1-1ubuntu0.1) ...
default: Selecting previously unselected package libargon2-1:amd64.
default: Preparing to unpack .../061-libargon2-1_0~20190702-0.1+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libargon2-1:amd64 (0~20190702-0.1+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package mlock.
default: Preparing to unpack .../062-mlock_8%3a2007f~dfsg-5ubuntu0.18.04.2_amd64.deb ...
default: Unpacking mlock (8:2007f~dfsg-5ubuntu0.18.04.2) ...
default: Selecting previously unselected package libc-client2007e.
default: Preparing to unpack .../063-libc-client2007e_8%3a2007f~dfsg-5ubuntu0.18.04.2_amd64.deb ...
default: Unpacking libc-client2007e (8:2007f~dfsg-5ubuntu0.18.04.2) ...
default: Selecting previously unselected package libwebp6:amd64.
default: Preparing to unpack .../064-libwebp6_0.6.1-2_amd64.deb ...
default: Unpacking libwebp6:amd64 (0.6.1-2) ...
default: Selecting previously unselected package libxpm4:amd64.
default: Preparing to unpack .../065-libxpm4_1%3a3.5.12-1_amd64.deb ...
default: Unpacking libxpm4:amd64 (1:3.5.12-1) ...
default: Selecting previously unselected package libgd3:amd64.
default: Preparing to unpack .../066-libgd3_2.3.0-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libgd3:amd64 (2.3.0-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libicu65:amd64.
default: Preparing to unpack .../067-libicu65_65.1-1+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libicu65:amd64 (65.1-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libnet1:amd64.
default: Preparing to unpack .../068-libnet1_1.1.6+dfsg-3.1_amd64.deb ...
default: Unpacking libnet1:amd64 (1.1.6+dfsg-3.1) ...
default: Selecting previously unselected package libpcre16-3:amd64.
default: Preparing to unpack .../069-libpcre16-3_2%3a8.44-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libpcre16-3:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libpcre32-3:amd64.
default: Preparing to unpack .../070-libpcre32-3_2%3a8.44-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libpcre32-3:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libpcrecpp0v5:amd64.
default: Preparing to unpack .../071-libpcrecpp0v5_2%3a8.44-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libpcrecpp0v5:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libpcre3-dev:amd64.
default: Preparing to unpack .../072-libpcre3-dev_2%3a8.44-2+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libpcre3-dev:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libsodium23:amd64.
default: Preparing to unpack .../073-libsodium23_1.0.18-1+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libsodium23:amd64 (1.0.18-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libssl-dev:amd64.
default: Preparing to unpack .../074-libssl-dev_1.1.1g-1+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking libssl-dev:amd64 (1.1.1g-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package libtool.
default: Preparing to unpack .../075-libtool_2.4.6-2_all.deb ...
default: Unpacking libtool (2.4.6-2) ...
default: Selecting previously unselected package libzip4:amd64.
default: Preparing to unpack .../076-libzip4_1.7.3-1+ubuntu18.04.1+deb.sury.org+2_amd64.deb ...
default: Unpacking libzip4:amd64 (1.7.3-1+ubuntu18.04.1+deb.sury.org+2) ...
default: Selecting previously unselected package mariadb-server.
default: Preparing to unpack .../077-mariadb-server_1%3a10.4.16+maria~bionic_all.deb ...
default: Unpacking mariadb-server (1:10.4.16+maria~bionic) ...
default: Selecting previously unselected package memcached.
default: Preparing to unpack .../078-memcached_1.5.6-0ubuntu1.2_amd64.deb ...
default: Unpacking memcached (1.5.6-0ubuntu1.2) ...
default: Selecting previously unselected package nginx.
default: Preparing to unpack .../079-nginx_1.19.4-1~bionic_amd64.deb ...
default: ----------------------------------------------------------------------
default:
default: Thanks for using nginx!
default:
default: Please find the official documentation for nginx here:
default: * http://nginx.org/en/docs/
default:
default: Please subscribe to nginx-announce mailing list to get
default: the most important news about nginx:
default: * http://nginx.org/en/support.html
default:
default: Commercial subscriptions for nginx are available on:
default: * http://nginx.com/products/
default:
default: ----------------------------------------------------------------------
default: Unpacking nginx (1.19.4-1~bionic) ...
default: Selecting previously unselected package ngrep.
default: Preparing to unpack .../080-ngrep_1.47+ds1-1_amd64.deb ...
default: Unpacking ngrep (1.47+ds1-1) ...
default: Selecting previously unselected package nodejs.
default: Preparing to unpack .../081-nodejs_10.23.0-1nodesource1_amd64.deb ...
default: Unpacking nodejs (10.23.0-1nodesource1) ...
default: Selecting previously unselected package php7.2-common.
default: Preparing to unpack .../082-php7.2-common_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-common (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-json.
default: Preparing to unpack .../083-php7.2-json_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-json (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-opcache.
default: Preparing to unpack .../084-php7.2-opcache_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-opcache (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-readline.
default: Preparing to unpack .../085-php7.2-readline_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-readline (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-cli.
default: Preparing to unpack .../086-php7.2-cli_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-cli (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-xml.
default: Preparing to unpack .../087-php7.2-xml_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-xml (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php-pear.
default: Preparing to unpack .../088-php-pear_1%3a1.10.12+submodules+notgz-1+ubuntu18.04.1+deb.sury.org+1_all.deb ...
default: Unpacking php-pear (1:1.10.12+submodules+notgz-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-bcmath.
default: Preparing to unpack .../089-php7.2-bcmath_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-bcmath (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-curl.
default: Preparing to unpack .../090-php7.2-curl_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-curl (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package pkg-config.
default: Preparing to unpack .../091-pkg-config_0.29.1-0ubuntu2_amd64.deb ...
default: Unpacking pkg-config (0.29.1-0ubuntu2) ...
default: Selecting previously unselected package shtool.
default: Preparing to unpack .../092-shtool_2.0.8-9_all.deb ...
default: Unpacking shtool (2.0.8-9) ...
default: Selecting previously unselected package php7.2-dev.
default: Preparing to unpack .../093-php7.2-dev_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-dev (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-fpm.
default: Preparing to unpack .../094-php7.2-fpm_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-fpm (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-gd.
default: Preparing to unpack .../095-php7.2-gd_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-gd (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-imap.
default: Preparing to unpack .../096-php7.2-imap_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-imap (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-intl.
default: Preparing to unpack .../097-php7.2-intl_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-intl (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-mbstring.
default: Preparing to unpack .../098-php7.2-mbstring_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-mbstring (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-mysql.
default: Preparing to unpack .../099-php7.2-mysql_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-mysql (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-soap.
default: Preparing to unpack .../100-php7.2-soap_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-soap (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package php7.2-zip.
default: Preparing to unpack .../101-php7.2-zip_7.2.34-8+ubuntu18.04.1+deb.sury.org+1_amd64.deb ...
default: Unpacking php7.2-zip (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Selecting previously unselected package ssl-cert.
default: Preparing to unpack .../102-ssl-cert_1.0.39_all.deb ...
default: Unpacking ssl-cert (1.0.39) ...
default: Selecting previously unselected package postfix.
default: Preparing to unpack .../103-postfix_3.3.0-1ubuntu0.3_amd64.deb ...
default: Unpacking postfix (3.3.0-1ubuntu0.3) ...
default: Selecting previously unselected package python-pip-whl.
default: Preparing to unpack .../104-python-pip-whl_9.0.1-2.3~ubuntu1.18.04.4_all.deb ...
default: Unpacking python-pip-whl (9.0.1-2.3~ubuntu1.18.04.4) ...
default: Selecting previously unselected package python-pip.
default: Preparing to unpack .../105-python-pip_9.0.1-2.3~ubuntu1.18.04.4_all.deb ...
default: Unpacking python-pip (9.0.1-2.3~ubuntu1.18.04.4) ...
default: Selecting previously unselected package python-pkg-resources.
default: Preparing to unpack .../106-python-pkg-resources_39.0.1-2_all.deb ...
default: Unpacking python-pkg-resources (39.0.1-2) ...
default: Selecting previously unselected package python-setuptools.
default: Preparing to unpack .../107-python-setuptools_39.0.1-2_all.deb ...
default: Unpacking python-setuptools (39.0.1-2) ...
default: Selecting previously unselected package subversion.
default: Preparing to unpack .../108-subversion_1.9.7-4ubuntu1_amd64.deb ...
default: Unpacking subversion (1.9.7-4ubuntu1) ...
default: Selecting previously unselected package unzip.
default: Preparing to unpack .../109-unzip_6.0-21ubuntu1_amd64.deb ...
default: Unpacking unzip (6.0-21ubuntu1) ...
default: Selecting previously unselected package zip.
default: Preparing to unpack .../110-zip_3.0-11build1_amd64.deb ...
default: Unpacking zip (3.0-11build1) ...
default: Selecting previously unselected package dos2unix.
default: Preparing to unpack .../111-dos2unix_7.3.4-3_amd64.deb ...
default: Unpacking dos2unix (7.3.4-3) ...
default: Setting up libquadmath0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up libgomp1:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up libatomic1:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up libapr1:amd64 (1.6.3-2) ...
default: Setting up php7.2-msgpack (2.1.1+0.5.7-2+ubuntu18.04.1+deb.sury.org+4) ...
default: Setting up python-pip-whl (9.0.1-2.3~ubuntu1.18.04.4) ...
default: Setting up imagemagick-6-common (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Setting up git-man (1:2.29.2-0ppa1~ubuntu18.04.1) ...
default: Setting up libcc1-0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up php7.2-yaml (2.2.0~b2+2.1.0+2.0.4+1.3.2-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up make (4.1-9.1ubuntu1) ...
default: Setting up php7.2-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libnet1:amd64 (1.1.6+dfsg-3.1) ...
default: Setting up php7.2-igbinary (3.1.6+2.0.8-2+ubuntu18.04.1+deb.sury.org+4) ...
default: Setting up nodejs (10.23.0-1nodesource1) ...
default: Setting up liblcms2-2:amd64 (2.9-1ubuntu0.1) ...
default: Setting up libjbig0:amd64 (2.1-3.1build1) ...
default: Setting up fonts-dejavu-core (2.37-1) ...
default: Setting up memcached (1.5.6-0ubuntu1.2) ...
default: Created symlink /etc/systemd/system/multi-user.target.wants/memcached.service → /lib/systemd/system/memcached.service.
default: Setting up shtool (2.0.8-9) ...
default: Setting up libtsan0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up unzip (6.0-21ubuntu1) ...
default: Setting up linux-libc-dev:amd64 (4.15.0-122.124) ...
default: Setting up php7.1-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libdpkg-perl (1.19.0.5ubuntu2.3) ...
default: Setting up dos2unix (7.3.4-3) ...
default: Setting up libyaml-perl (1.24-1) ...
default: Setting up ssl-cert (1.0.39) ...
default: Setting up ngrep (1.47+ds1-1) ...
default: Setting up libjpeg-turbo8:amd64 (1.5.2-0ubuntu5.18.04.4) ...
default: Setting up php7.3-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up m4 (1.4.18-1) ...
default: Setting up libmemcached11:amd64 (1.0.18-4.2ubuntu0.18.04.1) ...
default: Setting up libfftw3-double3:amd64 (3.3.7-1) ...
default: Setting up zip (3.0-11build1) ...
default: Setting up libterm-readkey-perl (2.37-1build1) ...
default: Setting up liblsan0:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up libcroco3:amd64 (0.6.12-2) ...
default: Setting up php7.4-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up gcc-7-base:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Setting up php-pcov (1.0.6-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up binutils-common:amd64 (2.30-21ubuntu1~18.04.4) ...
default: Setting up libsodium23:amd64 (1.0.18-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up liblqr-1-0:amd64 (0.4.2-2.1) ...
default: Setting up libmpx2:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up libicu65:amd64 (65.1-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libssh2-1:amd64 (1.8.0-1) ...
default: Setting up libaio1:amd64 (0.3.110-5ubuntu0.1) ...
default: Setting up mlock (8:2007f~dfsg-5ubuntu0.18.04.2) ...
default: Setting up autotools-dev (20180224.1) ...
default: Setting up libssl1.1:amd64 (1.1.1g-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libaprutil1:amd64 (1.6.1-2) ...
default: Setting up libltdl7:amd64 (2.4.6-2) ...
default: Setting up php7.2-memcache (4.0.5.2+3.0.9~20170802.e702b5f9-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up vim-common (2:8.0.1453-1ubuntu1.4) ...
default: Setting up libopts25:amd64 (1:5.18.12-4) ...
default: Setting up libxpm4:amd64 (1:3.5.12-1) ...
default: Setting up colordiff (1.0.18-1) ...
default: Setting up libpcrecpp0v5:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libpcre32-3:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up vim-runtime (2:8.0.1453-1ubuntu1.4) ...
default: Setting up libmpc3:amd64 (1.1.0-1) ...
default: Setting up libc-dev-bin (2.27-3ubuntu1.3) ...
default: Setting up libpcre16-3:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libargon2-1:amd64 (0~20190702-0.1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libpcre2-8-0:amd64 (10.35-5+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up lftp (4.8.1-1ubuntu0.1) ...
default: Setting up hicolor-icon-theme (0.17-2) ...
default: Setting up libc6-dev:amd64 (2.27-3ubuntu1.3) ...
default: Setting up libdbi-perl (1.640-1ubuntu0.2) ...
default: Setting up git (1:2.29.2-0ppa1~ubuntu18.04.1) ...
default: Setting up libitm1:amd64 (8.4.0-1ubuntu1~18.04) ...
default: Setting up libpython2.7-stdlib:amd64 (2.7.17-1~18.04ubuntu1.2) ...
default: Setting up libc-client2007e (8:2007f~dfsg-5ubuntu0.18.04.2) ...
default: Setting up php7.2-xdebug (2.9.8+2.8.1+2.5.5+3.0.0~beta1-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up postfix (3.3.0-1ubuntu0.3) ...
default: Created symlink /etc/systemd/system/multi-user.target.wants/postfix.service → /lib/systemd/system/postfix.service.
default: Adding group `postfix' (GID 119) ...
default: Done.
default: Adding system user `postfix' (UID 113) ...
default: Adding new user `postfix' (UID 113) with group `postfix' ...
default: Not creating home directory `/var/spool/postfix'.
default: Creating /etc/postfix/dynamicmaps.cf
default: Adding group `postdrop' (GID 120) ...
default: Done.
default: setting myhostname: vvv
default: setting alias maps
default: setting alias database
default: mailname is not a fully qualified domain name. Not changing /etc/mailname.
default: setting destinations: $myhostname, vvv, localhost.localdomain, , localhost
default: setting relayhost:
default: setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
default: setting mailbox_size_limit: 0
default: setting recipient_delimiter: +
default: setting inet_interfaces: all
default: setting inet_protocols: all
default: /etc/aliases does not exist, creating it.
default: WARNING: /etc/aliases exists, but does not have a root alias.
default:
default: Postfix (main.cf) is now set up with a default configuration. If you need to
default: make changes, edit /etc/postfix/main.cf (and others) as needed. To view
default: Postfix configuration values, see postconf(1).
default:
default: After modifying main.cf, be sure to run 'service postfix reload'.
default: Running newaliases
default: Setting up libwebp6:amd64 (0.6.1-2) ...
default: Setting up libjpeg8:amd64 (8c-2ubuntu8) ...
default: Setting up libisl19:amd64 (0.19-1) ...
default: Setting up libmariadb3:amd64 (1:10.4.16+maria~bionic) ...
default: Setting up vim-tiny (2:8.0.1453-1ubuntu1.4) ...
default: Setting up libpcre3-dev:amd64 (2:8.44-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up fontconfig-config (2.12.6-0ubuntu2) ...
default: Setting up git-lfs (2.12.1) ...
default: Git LFS initialized.
default: Setting up php7.2-common (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Creating config file /etc/php/7.2/mods-available/calendar.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/ctype.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/exif.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/fileinfo.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/ftp.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/gettext.ini with new version
default: Creating config file /etc/php/7.2/mods-available/iconv.ini with new version
default: Creating config file /etc/php/7.2/mods-available/pdo.ini with new version
default: Creating config file /etc/php/7.2/mods-available/phar.ini with new version
default: Creating config file /etc/php/7.2/mods-available/posix.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/shmop.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/sockets.ini with new version
default: Creating config file /etc/php/7.2/mods-available/sysvmsg.ini with new version
default: Creating config file /etc/php/7.2/mods-available/sysvsem.ini with new version
default: Creating config file /etc/php/7.2/mods-available/sysvshm.ini with new version
default: Creating config file /etc/php/7.2/mods-available/tokenizer.ini with new version
default: Setting up galera-4 (26.4.6-bionic) ...
default: Setting up libasan4:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Setting up php7.2-memcached (3.1.5+2.2.0-4+ubuntu18.04.1+deb.sury.org+4) ...
default: Setting up gettext (0.19.8.1-6ubuntu0.3) ...
default: Setting up libbinutils:amd64 (2.30-21ubuntu1~18.04.4) ...
default: Setting up php7.2-imap (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/imap.ini with new version
default: Setting up vim (2:8.0.1453-1ubuntu1.4) ...
default: Setting up libcilkrts5:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Setting up php7.2-curl (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/curl.ini with new version
default: Setting up php7.2-ssh2 (1.2+0.13-3+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up socat (1.7.3.2-2ubuntu2) ...
default: Setting up libubsan0:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Setting up libssl-dev:amd64 (1.1.1g-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up mariadb-client-core-10.4 (1:10.4.16+maria~bionic) ...
default: Setting up ntp (1:4.2.8p10+dfsg-5ubuntu7.3) ...
default: Created symlink /etc/systemd/system/network-pre.target.wants/ntp-systemd-netif.path → /lib/systemd/system/ntp-systemd-netif.path.
default: Created symlink /etc/systemd/system/multi-user.target.wants/ntp.service → /lib/systemd/system/ntp.service.
default: ntp-systemd-netif.service is a disabled or a static unit, not starting it.
default: Setting up python2.7 (2.7.17-1~18.04ubuntu1.2) ...
default: Setting up libtiff5:amd64 (4.0.9-5ubuntu0.3) ...
default: Setting up autoconf (2.69-11) ...
default: Setting up php7.2-mbstring (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/mbstring.ini with new version
default: Setting up nginx (1.19.4-1~bionic) ...
default: Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service.
default: Setting up libgcc-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Setting up php7.2-soap (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/soap.ini with new version
default: Setting up cpp-7 (7.5.0-3ubuntu1~18.04) ...
default: Setting up libstdc++-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...
default: Setting up libzip4:amd64 (1.7.3-1+ubuntu18.04.1+deb.sury.org+2) ...
default: Setting up libpython-stdlib:amd64 (2.7.15~rc1-1) ...
default: Setting up php7.2-readline (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Creating config file /etc/php/7.2/mods-available/readline.ini with new version
default: Setting up php7.2-bcmath (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Creating config file /etc/php/7.2/mods-available/bcmath.ini with new version
default: Setting up mariadb-client-10.4 (1:10.4.16+maria~bionic) ...
default: Setting up libserf-1-1:amd64 (1.3.9-6) ...
default: Setting up ntpdate (1:4.2.8p10+dfsg-5ubuntu7.3) ...
default: Setting up mariadb-server-core-10.4 (1:10.4.16+maria~bionic) ...
default: Setting up automake (1:1.15.1-3ubuntu2) ...
default: update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
default: Setting up php7.2-json (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/json.ini with new version
default: Setting up libsvn1:amd64 (1.9.7-4ubuntu1) ...
default: Setting up php7.2-intl (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/intl.ini with new version
default: Setting up python (2.7.15~rc1-1) ...
default: Setting up mariadb-server-10.4 (1:10.4.16+maria~bionic) ...
default: Failed to stop mysql.service: Unit mysql.service not loaded.
default: Created symlink /etc/systemd/system/mysql.service → /lib/systemd/system/mariadb.service.
default: Created symlink /etc/systemd/system/mysqld.service → /lib/systemd/system/mariadb.service.
default: Created symlink /etc/systemd/system/multi-user.target.wants/mariadb.service → /lib/systemd/system/mariadb.service.
default: Setting up php7.2-opcache (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/opcache.ini with new version
default: Setting up binutils-x86-64-linux-gnu (2.30-21ubuntu1~18.04.4) ...
default: Setting up php7.2-mysql (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/mysqlnd.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/mysqli.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/pdo_mysql.ini with new version
default: Setting up cpp (4:7.4.0-1ubuntu2.3) ...
default: Setting up libfontconfig1:amd64 (2.12.6-0ubuntu2) ...
default: Setting up php7.2-xml (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/dom.ini with new version
default: Creating config file /etc/php/7.2/mods-available/simplexml.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/wddx.ini with new version
default: Creating config file /etc/php/7.2/mods-available/xml.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/xmlreader.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/xmlwriter.ini with new version
default:
default: Creating config file /etc/php/7.2/mods-available/xsl.ini with new version
default: Setting up php7.2-zip (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/zip.ini with new version
default: Setting up libmagickcore-6.q16-3:amd64 (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Setting up libsvn-perl (1.9.7-4ubuntu1) ...
default: Setting up libgd3:amd64 (2.3.0-2+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up python-pkg-resources (39.0.1-2) ...
default: Setting up php7.2-cli (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: update-alternatives: using /usr/bin/php7.2 to provide /usr/bin/php (php) in auto mode
default: update-alternatives: using /usr/bin/phar7.2 to provide /usr/bin/phar (phar) in auto mode
default: update-alternatives:
default: using /usr/bin/phar.phar7.2 to provide /usr/bin/phar.phar (phar.phar) in auto mode
default:
default: Creating config file /etc/php/7.2/cli/php.ini with new version
default: Setting up php-pear (1:1.10.12+submodules+notgz-1+ubuntu18.04.1+deb.sury.org+1) ...
default: Setting up libmagickwand-6.q16-3:amd64 (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Setting up subversion (1.9.7-4ubuntu1) ...
default: Setting up binutils (2.30-21ubuntu1~18.04.4) ...
default: Setting up mariadb-server (1:10.4.16+maria~bionic) ...
default: Setting up git-svn (1:2.29.2-0ppa1~ubuntu18.04.1) ...
default: Setting up python-pip (9.0.1-2.3~ubuntu1.18.04.4) ...
default: Setting up php7.2-gd (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/mods-available/gd.ini with new version
default: Setting up python-setuptools (39.0.1-2) ...
default: Setting up php7.2-fpm (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default:
default: Creating config file /etc/php/7.2/fpm/php.ini with new version
default: Created symlink /etc/systemd/system/multi-user.target.wants/php7.2-fpm.service → /lib/systemd/system/php7.2-fpm.service.
default: Setting up gcc-7 (7.5.0-3ubuntu1~18.04) ...
default: Setting up g++-7 (7.5.0-3ubuntu1~18.04) ...
default: Setting up php7.2-imagick (3.4.4-10+ubuntu18.04.1+deb.sury.org+4) ...
default: Setting up imagemagick-6.q16 (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: update-alternatives:
default: using /usr/bin/compare-im6.q16 to provide /usr/bin/compare (compare) in auto mode
default: update-alternatives: using /usr/bin/compare-im6.q16 to provide /usr/bin/compare-im6 (compare-im6) in auto mode
default: update-alternatives: using /usr/bin/animate-im6.q16 to provide /usr/bin/animate (animate) in auto mode
default: update-alternatives: using /usr/bin/animate-im6.q16 to provide /usr/bin/animate-im6 (animate-im6) in auto mode
default: update-alternatives: using /usr/bin/convert-im6.q16 to provide /usr/bin/convert (convert) in auto mode
default: update-alternatives: using /usr/bin/convert-im6.q16 to provide /usr/bin/convert-im6 (convert-im6) in auto mode
default: update-alternatives: using /usr/bin/composite-im6.q16 to provide /usr/bin/composite (composite) in auto mode
default: update-alternatives: using /usr/bin/composite-im6.q16 to provide /usr/bin/composite-im6 (composite-im6) in auto mode
default: update-alternatives: using /usr/bin/conjure-im6.q16 to provide /usr/bin/conjure (conjure) in auto mode
default: update-alternatives: using /usr/bin/conjure-im6.q16 to provide /usr/bin/conjure-im6 (conjure-im6) in auto mode
default: update-alternatives: using /usr/bin/import-im6.q16 to provide /usr/bin/import (import) in auto mode
default: update-alternatives:
default: using /usr/bin/import-im6.q16 to provide /usr/bin/import-im6 (import-im6) in auto mode
default: update-alternatives: using /usr/bin/identify-im6.q16 to provide /usr/bin/identify (identify) in auto mode
default: update-alternatives: using /usr/bin/identify-im6.q16 to provide /usr/bin/identify-im6 (identify-im6) in auto mode
default: update-alternatives: using /usr/bin/stream-im6.q16 to provide /usr/bin/stream (stream) in auto mode
default: update-alternatives:
default: using /usr/bin/stream-im6.q16 to provide /usr/bin/stream-im6 (stream-im6) in auto mode
default: update-alternatives:
default: using /usr/bin/display-im6.q16 to provide /usr/bin/display (display) in auto mode
default: update-alternatives: using /usr/bin/display-im6.q16 to provide /usr/bin/display-im6 (display-im6) in auto mode
default: update-alternatives: using /usr/bin/montage-im6.q16 to provide /usr/bin/montage (montage) in auto mode
default: update-alternatives:
default: using /usr/bin/montage-im6.q16 to provide /usr/bin/montage-im6 (montage-im6) in auto mode
default: update-alternatives: using /usr/bin/mogrify-im6.q16 to provide /usr/bin/mogrify (mogrify) in auto mode
default: update-alternatives: using /usr/bin/mogrify-im6.q16 to provide /usr/bin/mogrify-im6 (mogrify-im6) in auto mode
default: Setting up gcc (4:7.4.0-1ubuntu2.3) ...
default: Setting up dpkg-dev (1.19.0.5ubuntu2.3) ...
default: Setting up imagemagick (8:6.9.7.4+dfsg-16ubuntu6.8) ...
default: Setting up g++ (4:7.4.0-1ubuntu2.3) ...
default: update-alternatives:
default: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
default: Setting up libtool (2.4.6-2) ...
default: Setting up pkg-config (0.29.1-0ubuntu2) ...
default: Setting up php7.2-dev (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: update-alternatives: using /usr/bin/php-config7.2 to provide /usr/bin/php-config (php-config) in auto mode
default: update-alternatives: using /usr/bin/phpize7.2 to provide /usr/bin/phpize (phpize) in auto mode
default: Processing triggers for mime-support (3.60ubuntu1) ...
default: Processing triggers for ureadahead (0.100.0-21) ...
default: Processing triggers for install-info (6.5.0.dfsg.1-2) ...
default: Processing triggers for libc-bin (2.27-3ubuntu1.2) ...
default: Processing triggers for systemd (237-3ubuntu10.42) ...
default: Processing triggers for man-db (2.8.3-2ubuntu0.1) ...
default: Processing triggers for rsyslog (8.32.0-1ubuntu4) ...
default: Processing triggers for ufw (0.36-0ubuntu0.18.04.1) ...
default: Processing triggers for php7.2-cli (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: Processing triggers for php7.2-fpm (7.2.34-8+ubuntu18.04.1+deb.sury.org+1) ...
default: * Removing unnecessary apt packages...
default: Reading package lists...
default: Building dependency tree...
default: Reading state information...
default: 0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
default: * Cleaning apt caches...
default: * Running tools_install
default: * Installing Shyaml for bash provisioning..
default: Collecting wheel
default: Downloading https://files.pythonhosted.org/packages/a7/00/3df031b3ecd5444d572141321537080b40c1c25e1caa3d86cdd12e5e919c/wheel-0.35.1-py2.py3-none-any.whl
default: Installing collected packages: wheel
default: Successfully installed wheel-0.35.1
default: Collecting shyaml
default: Downloading https://files.pythonhosted.org/packages/29/84/30051cc954696388d63bac118278e5c5a02d1765eed257b41b63a8b9c333/shyaml-0.6.1-py2.py3-none-any.whl
default: Collecting pyyaml (from shyaml)
default: Downloading https://files.pythonhosted.org/packages/64/c2/b80047c7ac2478f9501676c988a5411ed5572f35d1beff9cae07d321512c/PyYAML-5.3.1.tar.gz (269kB)
default: Building wheels for collected packages: pyyaml
default: Running setup.py bdist_wheel for pyyaml: started
default: Running setup.py bdist_wheel for pyyaml: finished with status 'done'
default: Stored in directory: /root/.cache/pip/wheels/a7/c1/ea/cf5bd31012e735dc1dfea3131a2d5eae7978b251083d6247bd
default: Successfully built pyyaml
default: Installing collected packages: pyyaml, shyaml
default: Successfully installed pyyaml-5.3.1 shyaml-0.6.1
default: * Turning off XDebug to avoid Composer performance issues
default: * Disabling active debug PHP mods
default: * Disabling if present: 'xdebug, xhgui, tideways_xhprof, pcov'
default: * Disabling active module: 'xdebug'
default: * Disabling active module: 'pcov'
default: * Restarting PHP FPM's so the change takes effect
default: * Making sure the composer cache is not owned by root
default: * Checking Composer is installed
default: * Installing Composer...
default: All settings correct for using Composer
default: Downloading...
default:
default: Composer (version 2.0.5) successfully installed to: /home/vagrant/composer.phar
default: Use it: php composer.phar
default: * Forcing composer to v1.x
default: Warning: You forced the install of 1.10.17 via --1, but 2.0.5 is the latest stable version. Updating to it via composer self-update --stable is recommended.
default: Upgrading to version 1.10.17 (1.x channel).
default:
default: Use composer self-update --rollback to return to version 2.0.5
default: * Composer installer steps completed
default: * Updating Composer...
default: Changed current directory to /usr/local/src/composer
default: A new stable major version of Composer is available (2.0.5), run "composer self-update --2" to update to it. See also https://getcomposer.org/2
default: You are already using composer version 1.10.17 (1.x channel).
default: * Making sure the PHPUnit 7.5 package is available...
default: Changed current directory to /usr/local/src/composer
default: ./composer.json has been updated
default: * Updating global composer packages...
default: Changed current directory to /usr/local/src/composer
default: Loading composer repositories with package information
default: Updating dependencies (including require-dev)
default: Package operations: 28 installs, 0 updates, 0 removals
default: - Installing sebastian/version (2.0.1):
default: Downloading
default: (100%)
default: - Installing sebastian/resource-operations (2.0.1): Downloading
default: (100%)
default: - Installing sebastian/recursion-context (3.0.0): Downloading
default: (100%)
default: - Installing sebastian/object-reflector (1.1.1): Downloading
default: (100%)
default: - Installing sebastian/object-enumerator (3.0.3): Downloading
default: (100%)
default: - Installing sebastian/global-state (2.0.0):
default: Downloading
default: (100%)
default: - Installing sebastian/exporter (3.1.2):
default: Downloading
default: (100%)
default: - Installing sebastian/environment (4.2.3):
default: Downloading
default: (100%)
default: - Installing sebastian/diff (3.0.2):
default: Downloading
default: (100%)
default: - Installing sebastian/comparator (3.0.2):
default: Downloading
default: (100%)
default: - Installing phpunit/php-timer (2.1.2):
default: Downloading
default: (100%)
default: - Installing phpunit/php-text-template (1.2.1):
default: Downloading
default: (100%)
default: - Installing phpunit/php-file-iterator (2.0.2):
default: Downloading
default: (100%)
default: - Installing theseer/tokenizer (1.2.0):
default: Downloading
default: (100%)
default: - Installing sebastian/code-unit-reverse-lookup (1.0.1):
default: Downloading
default: (100%)
default: - Installing phpunit/php-token-stream (3.1.1):
default: Downloading
default: (100%)
default: - Installing phpunit/php-code-coverage (6.1.4):
default: Downloading
default: (100%)
default: - Installing doctrine/instantiator (1.3.1):
default: Downloading
default: (100%)
default: - Installing symfony/polyfill-ctype (v1.20.0):
default: Downloading
default: (100%)
default: - Installing webmozart/assert (1.9.1):
default: Downloading
default: (100%)
default: - Installing phpdocumentor/reflection-common (2.2.0):
default: Downloading
default: (100%)
default: - Installing phpdocumentor/type-resolver (1.4.0):
default: Downloading
default: (100%)
default: - Installing phpdocumentor/reflection-docblock (5.2.2):
default: Downloading
default: (100%)
default: - Installing phpspec/prophecy (1.12.1):
default: Downloading
default: (100%)
default: - Installing phar-io/version (2.0.1):
default: Downloading
default: (100%)
default: - Installing phar-io/manifest (1.0.3):
default: Downloading
default: (100%)
default: - Installing myclabs/deep-copy (1.10.1):
default: Downloading
default: (100%)
default: - Installing phpunit/phpunit (7.5.20):
default: Downloading
default: (100%)
default: sebastian/global-state suggests installing ext-uopz (*)
default: phpunit/php-code-coverage suggests installing ext-xdebug (^2.6.0)
default: phpunit/phpunit suggests installing phpunit/php-invoker (^2.0)
default: phpunit/phpunit suggests installing ext-xdebug (*)
default: Package phpunit/php-token-stream is abandoned, you should avoid using it. No replacement was suggested.
default: Writing lock file
default: Generating autoload files
default: 4 packages you are using are looking for funding.
default: Use the `composer fund` command to find out more!
default: * Global composer package update completed
default:
default: * Install/Update PHP_CodeSniffer (phpcs), see https://github.com/squizlabs/PHP_CodeSniffer
default:
default: * Install/Update WordPress-Coding-Standards, sniffs for PHP_CodeSniffer, see https://github.com/WordPress-Coding-Standards/WordPress-Coding-Standards
default: Loading composer repositories with package information
default: Updating dependencies (including require-dev)
default: Package operations: 9 installs, 0 updates, 0 removals
default: - Installing composer/installers (v1.9.0):
default: Downloading
default: (100%)
default: - Installing oomphinc/composer-installers-extender (v1.1.2):
default: Downloading
default: (100%)
default: - Installing squizlabs/php_codesniffer (3.5.8):
default: Downloading
default: (100%)
default: - Installing wp-coding-standards/wpcs (2.3.0):
default: Downloading
default: (100%)
default: - Installing sirbrillig/phpcs-variable-analysis (v2.9.0):
default: Downloading
default: (100%)
default: - Installing automattic/vipwpcs (2.2.0):
default: Downloading
default: (100%)
default: - Installing phpcompatibility/php-compatibility (9.3.5):
default: Downloading
default: (100%)
default: - Installing phpcompatibility/phpcompatibility-paragonie (1.3.0):
default: Downloading
default: (100%)
default: - Installing phpcompatibility/phpcompatibility-wp (2.1.0):
default: Downloading
default: (100%)
default: wp-coding-standards/wpcs suggests installing dealerdirect/phpcodesniffer-composer-installer (^0.6 || This Composer plugin will sort out the PHPCS 'installed_paths' automatically.)
default: automattic/vipwpcs suggests installing dealerdirect/phpcodesniffer-composer-installer (^0.7 || This Composer plugin will manage the PHPCS 'installed_paths' automatically.)
default: phpcompatibility/php-compatibility suggests installing dealerdirect/phpcodesniffer-composer-installer (^0.5 || This Composer plugin will sort out the PHPCS 'installed_paths' automatically.)
default: phpcompatibility/php-compatibility suggests installing roave/security-advisories (dev-master || Helps prevent installing dependencies with known security issues.)
default: phpcompatibility/phpcompatibility-paragonie suggests installing dealerdirect/phpcodesniffer-composer-installer (^0.5 || This Composer plugin will sort out the PHP_CodeSniffer 'installed_paths' automatically.)
default: phpcompatibility/phpcompatibility-paragonie suggests installing roave/security-advisories (dev-master || Helps prevent installing dependencies with known security issues.)
default: phpcompatibility/phpcompatibility-wp suggests installing dealerdirect/phpcodesniffer-composer-installer (^0.5 || This Composer plugin will sort out the PHP_CodeSniffer 'installed_paths' automatically.)
default: phpcompatibility/phpcompatibility-wp suggests installing roave/security-advisories (dev-master || Helps prevent installing dependencies with known security issues.)
default: Writing lock file
default: 1 package you are using is looking for funding.
default: Use the `composer fund` command to find out more!
default: Using config file: /srv/www/phpcs/CodeSniffer.conf
default:
default: Config value "installed_paths" added successfully
default: Using config file: /srv/www/phpcs/CodeSniffer.conf
default:
default: Config value "default_standard" added successfully
default: The installed coding standards are PEAR, Zend, PSR2, MySource, Squiz, PSR1, PSR12, WordPress, WordPress-Extra, WordPress-Docs, WordPress-Core, WordPressVIPMinimum, WordPress-VIP-Go, PHPCompatibility, PHPCompatibilityParagonieRandomCompat, PHPCompatibilityParagonieSodiumCompat and PHPCompatibilityWP
default: * Installing/updating npm...
default: /usr/bin/npm -> /usr/lib/node_modules/npm/bin/npm-cli.js
default: /usr/bin/npx -> /usr/lib/node_modules/npm/bin/npx-cli.js
default: + npm@6.14.8
default: updated 1 package in 10.784s
default: * Installing/updating npm-check-updates...
default: /usr/bin/npm-check-updates -> /usr/lib/node_modules/npm-check-updates/bin/cli.js
default: /usr/bin/ncu -> /usr/lib/node_modules/npm-check-updates/bin/cli.js
default: + npm-check-updates@9.2.4
default: added 285 packages from 146 contributors in 21.16s
default: * Installing Grunt CLI
default: /usr/bin/grunt -> /usr/lib/node_modules/grunt-cli/bin/grunt
default: /usr/bin/grunt -> /usr/lib/node_modules/grunt/bin/grunt
default: + grunt@1.3.0
default: + grunt-cli@1.3.2
default: added 200 packages from 160 contributors in 14.073s
default: npm
default:
default: WARN
default: grunt-sass@3.1.0 requires a peer of grunt@>=1 but none is installed. You must install peer dependencies yourself.
default: + grunt-sass@3.1.0
default: added 1 package from 1 contributor in 0.517s
default: + grunt-cssjanus@0.5.0
default: added 2 packages from 2 contributors in 0.998s
default: + grunt-rtlcss@2.0.2
default: added 25 packages from 44 contributors in 2.995s
default: * Installed Grunt CLI
default: * Installing MailHog
default: * Installing MHSendmail
default: * Mailhog service file missing, setting up
default: * Enabling MailHog Service
default: Created symlink /etc/systemd/system/multi-user.target.wants/mailhog.service → /etc/systemd/system/mailhog.service.
default: * Starting MailHog Service
default:
default: * Installing/updating WP-CLI
default: * Downloading wp-cli nightly, see http://wp-cli.org
default: * Grabbing WP CLI bash completions
default: Installing package wp-cli/doctor-command (dev-master)
default: Updating /root/.wp-cli/packages/composer.json to require the package...
default: Registering git@github.com:wp-cli/doctor-command.git as a VCS repository...
default: Using Composer to install the package...
default: ---
default: Loading composer repositories with package information
default: Updating dependencies
default: Resolving dependencies through SAT
default: Looking at all rules.
default: Something's changed, looking at all rules again (pass #1)
default: Dependency resolution completed in 0.105 seconds
default: Analyzed 1784 packages to resolve dependencies
default: Analyzed 63924 rules to resolve dependencies
default: Package operations: 8 installs, 0 updates, 0 removals
default: Installs: wp-cli/language-command:v2.0.7, composer/semver:2.0.0, wp-cli/extension-command:v2.0.10, wp-cli/entity-command:v2.0.7, wp-cli/cron-command:v2.0.5, wp-cli/core-command:v2.0.11, wp-cli/checksum-command:v2.0.4, wp-cli/doctor-command:dev-master a97e29d
default: - Installing wp-cli/language-command (v2.0.7)
default: - Warning: wp-cli/doctor-command dev-master requires wp-cli/language-command ^2 -> satisfiable by wp-cli/language-command[2.x-dev, v2.0.0, v2.0.1, v2.0.2, v2.0.3, v2.0.4, v2.0.5, v2.0.6, v2.0.7].
default: - Installing composer/semver (2.0.0)
default: - Warning: wp-cli/extension-command v2.0.10 requires composer/semver ^1.4 || ^2.0 -> satisfiable by composer/semver[1.4.0, 1.4.1, 1.4.2, 1.5.0, 1.5.1, 1.5.2, 1.6.0, 1.7.0, 1.7.1, 1.x-dev, 2.0.0].
default: - Installing wp-cli/extension-command (v2.0.10)
default: - Warning: wp-cli/doctor-command dev-master requires wp-cli/extension-command ^2 -> satisfiable by wp-cli/extension-command[2.x-dev, v2.0.0, v2.0.1, v2.0.10, v2.0.11, v2.0.12, v2.0.13, v2.0.2, v2.0.3, v2.0.4, v2.0.5, v2.0.6, v2.0.7, v2.0.8, v2.0.9].
default: - Installing wp-cli/entity-command (v2.0.7)
default: - Warning: wp-cli/doctor-command dev-master requires wp-cli/entity-command ^2 -> satisfiable by wp-cli/entity-command[2.x-dev, v2.0.0, v2.0.1, v2.0.2, v2.0.3, v2.0.4, v2.0.5, v2.0.6, v2.0.7, v2.0.8, v2.0.9].
default: - Installing wp-cli/cron-command (v2.0.5)
default: - Warning: wp-cli/doctor-command dev-master requires wp-cli/cron-command ^2 -> satisfiable by wp-cli/cron-command[2.x-dev, v2.0.0, v2.0.1, v2.0.2, v2.0.3, v2.0.4, v2.0.5].
default: - Installing wp-cli/core-command (v2.0.11)
default: - Warning: wp-cli/doctor-command dev-master requires wp-cli/core-command ^2 -> satisfiable by wp-cli/core-command[2.x-dev, v2.0.0, v2.0.1, v2.0.10, v2.0.11, v2.0.2, v2.0.3, v2.0.4, v2.0.5, v2.0.6, v2.0.7, v2.0.8, v2.0.9].
default: - Installing wp-cli/checksum-command (v2.0.4)
default: - Warning: wp-cli/doctor-command dev-master requires wp-cli/checksum-command ^2 -> satisfiable by wp-cli/checksum-command[2.x-dev, v2.0.0, v2.0.1, v2.0.2, v2.0.3, v2.0.4].
default: - Installing wp-cli/doctor-command (dev-master a97e29d)
default: Writing lock file
default: Generating autoload files
default: 1 package you are using is looking for funding.
default: Use the `composer fund` command to find out more!
default: ---
default: Success: Package installed.
default:
default: * Setting up database configuration file links...
default: * Copied /srv/config/mysql-config/my.cnf to /etc/mysql/my.cnf
default: * Copied /srv/config/mysql-config/root-my.cnf to /home/vagrant/.my.cnf
default: * Checking the root user password is root
default: * The root password is not root, fixing
default: - root user password should now be root
default: * Restarting mysql service
default:
default: * No custom MySQL scripting found in database/init-custom.sql, skipping...
default: * Initial MySQL prep...
default: * Starting MariaDB Database Import
default: * Creating the `wordpress-one` database if it doesn't already exist, and granting the wp user access
default: * mysql -u root -proot 'wordpress-one' < 'wordpress-one.sql'
default: * Import of 'wordpress-one' successful
default: * Creating the `wordpress_unit_tests` database if it doesn't already exist, and granting the wp user access
default: * mysql -u root -proot 'wordpress_unit_tests' < 'wordpress_unit_tests.sql'
default: * Import of 'wordpress_unit_tests' successful
default: * Databases imported
default: * Generating Random Number for cert generation...
default:
default: * Generating Nginx server private key...
default: Generating RSA private key, 2048 bit long modulus (2 primes)
default: .....+++++
default: .......+++++
default: e is 65537 (0x010001)
default: * Sign the certificate using the above private key...
default:
default: * Setup configuration files...
default: * Copying /srv/config/nginx-config/nginx.conf to /etc/nginx/nginx.conf
default: * Copying /srv/config/nginx-config/nginx-wp-common.conf to /etc/nginx/nginx-wp-common.conf
default: * Copying /srv/config/php-config/upstream.conf to /etc/nginx/upstreams/php72.conf
default: * Rsync'ing /srv/config/nginx-config/sites/ to /etc/nginx/custom-sites
default: sending incremental file list
default: default.conf
default: local-nginx-example.conf-sample
default: sent 1.90K bytes received 54 bytes 3.91K bytes/sec
default: total size is 4.08K speedup is 2.09
default: * Making sure the Nginx log files and folder exist
default: * Copying /srv/config/php-config/php-fpm.conf to /etc/php/7.2/fpm/php-fpm.conf
default: * Copying /srv/config/php-config/php-www.conf to /etc/php/7.2/fpm/pool.d/www.conf
default: * Copying /srv/config/php-config/php-custom.ini to /etc/php/7.2/fpm/conf.d/php-custom.ini
default: * Copying /srv/config/php-config/opcache.ini to /etc/php/7.2/fpm/conf.d/opcache.ini
default: * Copying /srv/config/php-config/xdebug.ini to /etc/php/7.2/mods-available/xdebug.ini
default: * Copying /srv/config/php-config/mailhog.ini to /etc/php/7.2/mods-available/mailhog.ini
default: * Copying /srv/config/memcached-config/memcached.conf to /etc/memcached.conf and /etc/memcached_default.conf
default: * Finalizing
default:
default: * Cleaning up Nginx configs
default: * Disabling XDebug PHP extension
default: * Enabling MailHog for PHP
default:
default: * Cleaning the virtual machine's /etc/hosts file...
default:
default: * Restarting services...
default: ✔ The 'main' provisioner completed in 366 seconds.
==> default: Running provisioner: dashboard (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-9icrie.sh
default: ▷ Running the 'dashboard' provisioner...
default: ✔ The 'dashboard' provisioner completed in 1 seconds.
==> default: Running provisioner: utility-source-core (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-r7ux1t.sh
default: ▷ Running the 'utility-source-core' provisioner...
default: ✔ The 'utility-source-core' provisioner completed in 1 seconds.
==> default: Running provisioner: utility-core-tls-ca (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-d5s8z4.sh
default: ▷ Running the 'utility-core-tls-ca' provisioner...
default: ✔ The 'utility-core-tls-ca' provisioner completed in 2 seconds.
==> default: Running provisioner: utility-core-phpmyadmin (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-1g7s5wy.sh
default: ▷ Running the 'utility-core-phpmyadmin' provisioner...
default: ✔ The 'utility-core-phpmyadmin' provisioner completed in 0 seconds.
==> default: Running provisioner: utility-core-memcached-admin (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-1jmmmko.sh
default: ▷ Running the 'utility-core-memcached-admin' provisioner...
default: ✔ The 'utility-core-memcached-admin' provisioner completed in 0 seconds.
==> default: Running provisioner: utility-core-opcache-status (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-1dxqdld.sh
default: ▷ Running the 'utility-core-opcache-status' provisioner...
default: From https://github.com/rlerdorf/opcache-status
default: * branch master -> FETCH_HEAD
default: ✔ The 'utility-core-opcache-status' provisioner completed in 0 seconds.
==> default: Running provisioner: utility-core-webgrind (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-1btx409.sh
default: ▷ Running the 'utility-core-webgrind' provisioner...
default: Loading composer repositories with package information
default: Updating dependencies (including require-dev)
default: Package operations: 3 installs, 0 updates, 0 removals
default: - Installing composer/installers (v1.9.0):
default: Loading from cache
default: - Installing oomphinc/composer-installers-extender (v1.1.2):
default: Loading from cache
default: - Installing jokkedk/webgrind (v1.7.0):
default: Downloading (connecting...)
Downloading (100%)
default: Writing lock file
default: 1 package you are using is looking for funding.
default: Use the `composer fund` command to find out more!
default: ✔ The 'utility-core-webgrind' provisioner completed in 6 seconds.
==> default: Running provisioner: utility-core-mongodb (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-19beks0.sh
default: ▷ Running the 'utility-core-mongodb' provisioner...
default: Warning: apt-key output should not be parsed (stdout is not a terminal)
default: Warning: apt-key output should not be parsed (stdout is not a terminal)
default: exception: connect failed
default: exception:
default: connect failed
default: exception: connect failed
default: exception:
default: connect failed
default: exception: connect failed
default: Created symlink /etc/systemd/system/multi-user.target.wants/mongod.service → /lib/systemd/system/mongod.service.
default: ✔ The 'utility-core-mongodb' provisioner completed in 124 seconds.
==> default: Running provisioner: utility-core-tideways (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-ah338j.sh
default: ▷ Running the 'utility-core-tideways' provisioner...
default: Cloning into '/var/local/tideways-php'...
default: Cloning into 'xhgui'...
default: dpkg-preconfigure: unable to re-open stdin: No such file or directory
default: ✔ The 'utility-core-tideways' provisioner completed in 58 seconds.
==> default: Running provisioner: utility-core-nvm (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-1hkykwj.sh
default: ▷ Running the 'utility-core-nvm' provisioner...
default: % Total % Received % Xferd Average Speed Time Time
default: Time Current
default: Dloa
default: d Upload Total Spent Left Spee
default: d
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
default: 1
default: 0
default: 0
default:
default: 1
default: 3
default: 5
default: 2
default: 7
default:
default:
default: 1
default: 0
default: 0
default:
default: 1
default: 3527 0 0 106k 0 --:--:-- --:--:-- --:--:-- 106k
default: Cloning into '/root/.nvm'...
default: sudo
default: : /root/.nvm/nvm.sh: command not found
default: /srv/provision/utilities/core/nvm/provision.sh: line 29: nvm: command not found
default: ✔ The 'utility-core-nvm' provisioner completed in 4 seconds.
==> default: Running provisioner: site-wordpress-one (shell)...
default: Running: /var/folders/nc/rd8ptn1137jc2vfmq_8s8n1c0000gn/T/vagrant-shell20201106-4658-j4cg2a.sh
default: ▷ Running the 'site-wordpress-one' provisioner...
default: ✔ The 'site-wordpress-one' provisioner completed in 6 seconds.
==> default: Running action triggers after up ...
==> default: Running trigger: VVV Post-Up...
default: Running: inline script
default: * Restarting Nginx and MySQL
default: * Syncing clocks
default: 6 Nov 21:20:11 ntpdate[15195]: adjust time server 91.189.91.157 offset -0.007656 sec
default:
default: yay
default: ✧ ▄▀▀▀▄▄▄▄▄▄▄▀▀▀▄ ✧ __ __ __ __
default: ✧█▒▒░░░░░░░░░▒▒█ Thanks for \ V\ V\ V /
default: ✧ █░░█░░░░░█░░█ ✧ using \_/\_/\_/
default: ▄▄ █░░░▀█▀░░░█ ▄▄✧
default: █░░█ ▀▄░░░░░░░▄▀ █░░█ Vagrant Up has finished! Visit http://vvv.test
default: As we did support for a similar issue do you have the index.php file inside www/default/ folder?
Mte90
commented
3 years ago Can you test with the latest release?
tomjn
commented
2 years ago Closing this as there's been no updates and it's been a while. If it's still an issue, please reopen
mrinal013
commented
2 years ago Hello, I am getting page with error 403 on wordpress-trunk. Others are ok. I think the problem is similar to this. 
tomjn
commented
2 years ago @mrinal013 related in that it also mentions a 403 error but other than that there is zero overlap.
Unless it is the same issue, you should have created a new issue, I look forward to seeing it with all the necessary debugging info.
Hi, thanks again for all your hard work.
I'm testing out some XHGui issues (another ticket, so not subject of this issue) and with the recent develop release i'm getting a 403 for the vvv.test dashboard.
This is a fresh clone of develop branch so a new machine. I tried reprovisioning but no help.
Am I missing something in the config yml file?
Thanks in advance!