Vaskivskyi
commented
2 months ago Hello. Are all your devices on the FW branch 3.0.0.4.388.x?
If you don't mind, could you check the following:
- In the router (any which has this issue) go to the log page
- Disable/enable the 5 GHz network from Web UI
- Find the corresponding service call in the log. Probably will look like this:
Aug 10 11:49:44 rc_service: cfg_server 21778:notify_rc restart_wireless(at least, there should be some rc_service just after the time, the exact message afterwards might be different)
- repeat the same from the HA integration and check for the log entry
This would help with finding the issue faster
Thanks!
norikohxb
The problem
[Bug] when use this plugin to disable 5G wifi or enable 5G wifi ,all 2.4G device had to reconnect to AP again. I use PRI to judge an area if there has nobody in this area the 5G wifil will be shut down. and when PIR detected person into this area the 5G wifil will be enabled again. but when enable or disable this 5G wifi , the AP's 2.4G devices will be affected and need to reconnect to the 2.4G again. can fix this bug ? if I login asus website use website to disable 5G wifi , there has no effect on 2.4G
Your device model
rt-ax56; rt-ax89x tuf-ax3000 tuf-ax5600 all same issue
Firmware type
Stock
Firmware version
the newest
Integration version with the issue
0.32.1
Method of the integration installation
HACS
What version and type of Home Assistant installation do you use
2024.8.0
Is there anything useful in the logs?
No response
Diagnostics information
No response
Additional information
No response