search

VernierST / arduino

Project sketches using Vernier Sensors with Arduino. The Vernier Library is used where appropriate. Please see VernierLib for additional sketches.
https://www.vernier.com/arduino
Other
28 stars 21 forks source link

BNC Connection to Nitrate ISE sensor #5

Closed hpollek closed 7 years ago

hpollek commented 7 years ago

Hello, I am trying to use this sketch to run a TruLine Nitrate ISE Sensor, should I just be connecting the Sensor to a female BNC connector with the core connector going to A0 and the outer connector going to GND?

dvernier commented 7 years ago

Hello,

I do not know anything about a TruLine Nitrate Sensor. I have no idea what signal it puts out.

Arduinos read voltages and that is what many of our sketches do. You then need to convert the voltage reading to a meaningful nitrate reading.

Dave Vernier

David L. Vernier Founder and Co-President Vernier Software & Technology 13979 SW Millikan Way Beaverton, OR 97005 503-277-2299 1-888-Vernier (1-888-837-6437) dvernier@vernier.com www.vernier.com

On Wed, Jun 28, 2017 at 1:03 PM, hpollek notifications@github.com wrote:

Hello, I am trying to use this sketch to run a TruLine Nitrate ISE Sensor, should I just be connecting the Sensor to a female BNC connector with the core connector going to A0 and the outer connector going to GND?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/VernierSoftwareTechnology/arduino/issues/5, or mute the thread https://github.com/notifications/unsubscribe-auth/AFvaagSGyf0u2wMAI4AWAA0lXq57e-HLks5sIrGEgaJpZM4OIdNM .