Open gadafivg opened 2 years ago
You have to create your sensors manually in the configuration.yaml file. E.g.:
sensor:
- platform: mqtt
name: "Outdoor temperature"
state_topic: "irt-esp/boiler_data"
device_class: "temperature"
value_template: "{{ value_json.outdoorTemp }}"
qos: 0
unit_of_measurement: "°C"
icon: mdi:coolant-temperature
unique_id: "boiler_outdoorTemp"`
I have modified files and getting majority of data into HAssio. Still cannot get info from Thermostat side. Is there way to get those?
Not sure what kind of information you are looking for ? But the maximum set of information you can get is:
Boiler stats:
Hot tap water: off
Central heating: active
Warm Water activated: on
Warm Water selected temperature: 40.0 C
Warm Water current temperature: 62.0 C
Warm Water 3-way valve: off
Selected flow temperature: 40 C
Current flow temperature: 44.0 C
Return temperature: 37.0 C
Gas: on
Boiler pump: on
Fan: on
Ignition: off
Burner selected max power: 30 %
System service code: -H (83)
Heating temperature setting on the boiler: 55 C
Outside temperature: 12.0 C
Flow temp. PID: 1.00 0.10 0.00
Max. flow temp.: 60 C
(This is the output of the telnet command 'info') But the information that is available is strongly depend on the connected thermostat.
With the telnet command 'log m' you can show the MQTT messages that are being send, this is from my system:
{"wWSelTemp":40,"selFlowTemp":40,"selBurnPow":30,"outdoorTemp":12,"wWCurTmp":62,"curFlowTemp":44,"retTemp":37,"wWActivated":"on","burnGas":"on","heatPmp":"on","fanWork":"on","ignWork":"off","heating_temp":55,"wWHeat":"off","ServiceCode":"-H","ServiceCodeNumber":83}
Hello,
Modified BBQKees board to iRT and sucessfuly getting data from Buderus GB112. Since iRT-ESP is version without MQTT autodiscovery having issues integrating it to Homeassistant. As noob i'm tried to write entity to configuration.yaml but getting nowhere. On EMS-ESP there are no steps described for this. Plz help...