About half the "3mm" set of panel clips have 5mm depth and fit my 3mm panel nicely, including room for VHB tape. The other half have 4mm depth and as a result have an awkward fit, requiring either loose tension of screws or some "flexing" of the clip to meet the rail.
The list of parts in the "3mm" set that have 4mm (perhaps incorrect?) depth is:
3mm_Bottom_Corner_Side_mirror_x1.stl
3mm_Bottom_Corner_Side_x2.stl
3mm_Middle_Clip_x9.stl
3mm_Top_Corner_Rear_mirror_x1.stl
3mm_Top_Corner_Rear_x1.stl
3mm_Top_Corner_Side_mirror_x1.stl
3mm_Top_Corner_Side_x2.stl
One way or the other, the fitment of the parts in this STL set seems to me inconsistent.
About half the "3mm" set of panel clips have 5mm depth and fit my 3mm panel nicely, including room for VHB tape. The other half have 4mm depth and as a result have an awkward fit, requiring either loose tension of screws or some "flexing" of the clip to meet the rail.
The list of parts in the "3mm" set that have 4mm (perhaps incorrect?) depth is:
One way or the other, the fitment of the parts in this STL set seems to me inconsistent.