Closed tawera closed 3 years ago
From the V0.1 sourcing guide:
print panel clips that match your panel thickness, if you are in between print the smaller size
V0.0 had different sizes, (2.0, 2.5, 3.0):
https://github.com/VoronDesign/Voron-0/tree/Voron0.0/VORON-0/STLs/V0_TopHat/TopHat_Panel_Mounting
V0.1 does not:
https://github.com/VoronDesign/Voron-0/tree/Voron0.1/STLs/Tophat
that source guide note is not present on the tophat panels line. different sized clips are available for the side panels where that note applies
From the V0.1 sourcing guide:
V0.0 had different sizes, (2.0, 2.5, 3.0):
https://github.com/VoronDesign/Voron-0/tree/Voron0.0/VORON-0/STLs/V0_TopHat/TopHat_Panel_Mounting
V0.1 does not:
https://github.com/VoronDesign/Voron-0/tree/Voron0.1/STLs/Tophat