I noticed I have some of the panels misaligned, so I gotta fix it. This issue is here to hold me accountable.
Items to fix:
panel placement.
clip placement.
linear rail placement for Y axis might not be correct, will need to confirm because it might depend on order of assembly. (1mm gap between YMAX and rear of gantry, which might be intentional).
tophat placement.
hardware is not instanced, there are several copies.
bodies are not aligned to the origin to export to the slicer correctly facing the buildplate.
leadscrew is not correctly modeled (dovetail threads rather than trapezoidal).
miniSB components not evenly spaced in CAD, but are spaced correctly assembled.
raspberry pi and SKR Pico should be simplified (render models left in).
switch to the typical heat-set insert models we use.
frame blind joints have m3x8 bhcs when they are spec m3x10
Items to consider:
rather than providing multiple STEP/F3D files for every hotend mount, toolhead, ADXL mount, etc, we have one STEP file and one F3D containing everything related to CAD. F3D is not a requirement here, but I like providing it because the materials/appearances look nice, and joints to open and close the door and tophat are fun.
DIN rail option should be shown, since it's supported, barring any HATs or PCBs on Raspberry Pi.
z chain is a little wonky and should probably be fixed.
provide single-body side skirt STLs for those who wish to use them.
modeled reverse bowden tube and filament need help (never really liked how they turned out, will probably just leave it alone to maintain continuity with the manual).
model a faux umbilical cable.
any changes to printed files desired should be lumped into the eventual PR that will close this issue, pending approval from the lead dev, Nemgrea.
I noticed I have some of the panels misaligned, so I gotta fix it. This issue is here to hold me accountable.
Items to fix:
Items to consider:
Things that will not change: