search

VoronDesign / Voron-0

Voron 0 CoreXY 3D Printer design
GNU General Public License v3.0
1.38k stars 387 forks source link

Gaps in Toolhead Blower Duct (Left) #38

Closed Maverick-3D closed 4 years ago

Maverick-3D commented 4 years ago

Thin walls around the screw holes on the part: "[a]_Toolhead_Blower_Duct_Left_TV6_x1" leads to gaps on the inside during slicing and printing. Attempted to alleviate the issue by enabling "Print Thin Walls" within Cura, to no avail.

Printed using recommended settings, please see attached for reference.

20200905_140744

image0

unknown

Roycinger commented 4 years ago

I can confirm that S3D behaves in a similar fashion:

Bildschirmfoto 2020-10-04 um 02 51 23

Same with SuperSlicer: image

FHeilmann commented 4 years ago

I checked back with the devs and they assured me that these holes do not impede the functionality of that part. Yes they are a little unsightly, but unfortunately the space around these featres does not permit a "fix" via thickening those sections.

I'm therefore going to close this issue. If you feel this has been in error and want to provide a rationale while this should be fixed apart from the visual aspect, feel free to reopen it!

Bests, -Florian

FHeilmann commented 4 years ago

@mvrckcompany the devs elected to fix your issue anyway. Latest master (with https://github.com/VoronDesign/Voron-0/pull/45 merged) should fix the slicing issue.