search

VoronDesign / Voron-0

Voron 0 CoreXY 3D Printer design
GNU General Public License v3.0
1.35k stars 388 forks source link

Insufficient m3x6 screws in the BOM #59

Closed khumarahn closed 3 years ago

khumarahn commented 3 years ago

Hi. The BOM requires 11 m3x6 screws which is not sufficient. Only the skirts need 12 of them. Also there is a related mistake in the manual, where m3x35 and rubber feet are listed instead of m3x6. image

nemgrea commented 3 years ago

I can't edit the bom, assign to rcf

On Fri, Feb 19, 2021, 2:54 PM RaymondH notifications@github.com wrote:

Assigned #59 https://github.com/VoronDesign/Voron-0/issues/59 to @nemgrea https://github.com/nemgrea.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub https://github.com/VoronDesign/Voron-0/issues/59#event-4354041069, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMM3G7IT2E6C5BDXZSMNBTTS73FYFANCNFSM4WFNVQRA .

raymondh2 commented 3 years ago

This is now for an old release. Closing issue.