search

VoronDesign / Voron-0

Voron 0 CoreXY 3D Printer design
GNU General Public License v3.0
1.35k stars 388 forks source link

FR : More FDM friendly tophat parts #61

Closed ChipCE closed 3 years ago

ChipCE commented 3 years ago

Hello, sorry if this is not the right place to request FR like this. The chamfer on the top hat parts is 36.78° that make the parts very hard to print nicely with FDM printer. At first, I was thinking problem is my bad cooling, but other members on Voron discord also have the same problem, some suggest to print the parts with PLA+. If the chamfer angle is 45° or higher, the parts will can be printed with most of filament type. tophat

Stephan3 commented 3 years ago

You can print the 4 piece tophat in a 45° orientation thats more fanfriendly. That helps a lot

ChipCE commented 3 years ago

Yes, I printed with the 4 pieces version. The picture above is cad model of the 4 pieces version.

cura_09-54-27 IMG_20210125_091103

nemgrea commented 3 years ago

this is being fixed in the next release, closing the issue for now as the new tophat will eliminate the <45deg faces