search

VoronDesign / Voron-1

Voron 1 CoreXY 3D Printer design
GNU General Public License v3.0
192 stars 63 forks source link

STL latch needed 1 time instead of 2 #59

Closed degraafm76 closed 3 years ago

degraafm76 commented 3 years ago

\Voron-1-1.8r1\Voron-1-1.8r1\STLs\Panel_Mounting\Front_Doors\latch_x2.stl should be printed once according to the CAD. Filename should be changed to latch.stl

raymondh2 commented 3 years ago

Two is correct. One on top and bottom.

degraafm76 commented 3 years ago

Two is correct. One on top and bottom.

No not for the 1.8. Please look at the master CAD. Bottom is closed with handle_bottom_left and handle_bottom_right. I'm 100% sure no latch is used for bottom handles. The bottom handles are closed with 3 magnets in the handles.

image

raymondh2 commented 3 years ago

No it is still correct. The bottom handles just magnets to latch to the latch part just like the top handles

degraafm76 commented 3 years ago

I'm 100% sure it isnt the case ;-) please take a look at the master CAD and my previous screenshot. The bottom latch would also interfere with the LCD display.

dubjay2k commented 3 years ago

Confirming I only used one latch for my build, and that was at the top, where it holds magnets for the top two door handles.