GadgetAngel
commented
2 years ago - replaced the MKS Monster 8 board (v2_monster8_wiring.md)
- added the additional .md files also: a. v2_monster8_uart_wiring.md b. v2_monster8_spi_wiring.md c. monster8_RaspberryPi.md d. monster8_Resources.md
- added initial Removal of Jumpers picture
- added Initial Preparation - Set Jumpers picture
- Added FAN & Endstop/PROBE & DRIVER IC Voltage Selection
- added initial preparation - Set Jumpers diagram for MKS Monster 8 in UART mode
- added initial preparation - Set Jumpers diagram for MKS Monster 8 in SPI mode
- updated and fixed errors in the wiring diagram in MKS Monster 8 in UART mode and SPI mode - the PROBE signal pin was attached to the 24VDC power PIN in the old diagram
- updated the description to the wiring diagram to use the names for the driver sockets and motor sockets.
- added section about Stepper Motor Drivers
- updated wiring diagram for Voron 2.4 MKS Monster 8 in UART mode to correct errors
- updated wiring diagram for Voron 2.4 MKS Monster 8 in SPI mode to correct errors
- Added the ability to download the wiring diagrams
- added the heatsink diagram to remind user to ensure that the heatsinks are installed on the stepper motor drivers in both SPI and UART Mode
- added the description about MKS Monster 8 UART communications with Raspberry pi with diagram
- added a digram showing how to hook up independent power supply for Raspberry pi
- added SSR wiring diagram using MKS Monster 8 in both UART and SPI mode (the hook up is the same, but using the correct image of the board, in spi or uart mode, reduces confusion for the Voron user
- added the ability to download the SSR wiring diagrams
- added Color Pin diagram for MKS Monster 8
- Added link so Voronusers can download the Color PIN diagram from this page in both .pdf and .jpg format
- Added the ability to examine the Color PIN diagram with ZOOM function
- added original MKS Monster 8 pinout
- added "if pin diagrams do not match check the schematic diagram" section, provide link to MKS Monster 8 schematic diagram
- Added the ability to examine the original pinout diagram with ZOOM capability
- add the ability to toggle color modes so the site will be color-blind-friendly
- compressed all pictures and diagrams so the page load time is fast.
- Checked these pages by running the server locally on my Windows machine, then if everything works, uploaded them to my LIVE TEST Voron Docs site at https://gadgetangel.org so I can see if there are any interactions between all the pull requests I have submitted thus far.