updated the BTT V0.0 SKR mini E3 V20 file (v00_miniE3_v20_wiring.md)
reused the following from V0.1 setup:
a. mini_e3_v20_Resources.md
b. mini_e3_v20_RaspberryPi.md
added missing wiring diagram
added link to last known V0.0 klipper config file for wiring diagram
fixed the MagicStudios / Knacro SSR picture which was using the skr mini E3 V1.2 board do I used the skr mini E3 V2.0 board and renamed the file to SKRminiE3v20_knacro_ssr_wiring_diagram.png
added Initial Preparation - Set Jumpers pictures for Skr mini E3 V2.0
added a check box next to each item on the MCU description so the user can check of the items as he goes, if he wants. I had to enable the check boxes to be interactive by adding a JS function to the just-the-docs.js file. New function called "enable_checkboxes();"
Added wiring diagram for Voron V0.0 BTT Skr mini E3 V2.0
Added the ability to download the wiring diagrams
added the heatsink diagram to remind user to ensure that the heatsinks are installed on the stepper motor drivers
added a note to help the user orient the heat sinks properly on the step stick boards.
added the description about BTT Skr mini E3 V2.0 UART communications with Raspberry pi with diagram
added a diagram showing how to hook up independent power supply for Raspberry pi
added the Color Pin diagram for BTT Skr mini E3 V2.0, and corrected an error I found in it so I updated the color PIN diagram.
Added link so Voron users can download the Color PIN diagram from this page in both .pdf and .jpg format
Added the ability to examine the Color PIN diagram with ZOOM function
added original BTT Skr mini E3 V2.0 pinout
added "if pin diagrams do not match check the schematic diagram" section, provide link to BTT Skr mini E3 V2.0 schematic diagram
Added the ability to examine the original pinout diagram with ZOOM capability
add the ability to toggle color modes so the site will be color-blind-friendly
compressed all pictures and diagrams so the page load time is fast.
Checked these pages by running the server locally on my Windows machine, then if everything works, uploaded them to my LIVE TEST Voron Docs site at https://gadgetangel.org so I can see if there are any interactions between all the pull requests I have submitted thus far.