this PR needs PR #228 so it can work properly. It contains a link to the information in PR #228
updated the BTT SKR V1.3 file (v1_skr13_uart_wiring.md)
reused the following from another setup:
a. skrv13_RaspberryPi.md
b. skr_v13_Resources.md
added initial Removal of Jumpers pictures for SKR v1.3 in UART mode only
added Initial Preparation - Set Jumpers pictures for SKR v1.3 in UART mode only
Added Voltage Selections for SKR v1.3 in UART mode
added initial preparation - Set Jumpers diagram for BTT SKR V1.3 in UART mode
added a check box next to each item on the MCU description so the user can check of the items as he goes, if he wants. I had to enable the check boxes to be interactive by adding a JS function to the v1_skr13_uart_wiring.md file. New function called "enable_checkboxes();"
added a term definition for BAT85 below the MCU description
added section about Stepper Motor Drivers
Added wiring diagram for Voron V1.8 BTT SKR V1.3 in UART mode
Added the ability to download the wiring diagrams
added the heatsink diagram to remind user to ensure that the heatsinks are installed on the stepper motor drivers in UART Mode
added a note to help the user orient the heat sinks properly on the step stick boards.
added the description about BTT SKR V1.3 UART serial communications with Raspberry pi with diagram
added a diagram showing how to hook up independent power supply for Raspberry pi
added SSR wiring diagram using BTT SKR V1.3 in UART mode
added the ability to download the SSR wiring diagrams
added the Color Pin diagram for BTT SKR V1.3
Added link so Voron users can download the Color PIN diagram from this page in both .pdf and .jpg format
Added the ability to examine the Color PIN diagram with ZOOM function
added original BTT SKR V1.3 pinout
added "if pin diagrams do not match check the schematic diagram" section, provide link to BTT SKR V1.3 schematic diagram
Added the ability to examine the original pinout diagram with ZOOM capability
compressed all pictures and diagrams so the page load time is fast.
Checked these pages by running the server locally on my Windows machine, then if everything works, uploaded them to my LIVE TEST Voron Docs site at https://gadgetangel.org so I can see if there are any interactions between all the pull requests I have submitted thus far.
this PR needs PR #228 so it can work properly. It contains a link to the information in PR #228