Add Voron2 FYSETC Spider V2.2 wiring diagram, This PR will not work properly without PR #240

[GadgetAngel]

*Add Voron2 FYSETC Spider V2.2 wiring diagram, This PR will not work properly without PR #240 . It contains a link to the information in PR #240

• this PR also assumes the PR #346 from VoronDesign/Voron-2 will be accepted, (https://github.com/VoronDesign/Voron-2/pull/346#issue-1206242459). The PR points the user to the Klipper config file and assumes that Voron2_Spider_Config.cfg file works with the Fysetc Spider V2.2 board.

*updated Electrical Index.md file to add the Voron 2.4 Fysetc Spider V2.2 (v2_spiderv22_uart_wiring.md)

*reused three additional files: a. Fysetc_Spider_ProbePort.md b. Fysetc_Spider_RaspberryPi.md c. Fysetc_Spider_Resources_v2.md

added initial Removal of Jumpers diagram added initial preparation - Set Jumpers diagram for Fysetc Spider V2.2 updated description for Voron2 wiring diagram in Fysetc Spider V2.2 added wiring diagram for Voron2 - Fysetc Spider V2.2 *added the heatsink diagram to remind user to ensure that the heatsinks are installed on the stepper motor drivers for:

1. MCU XYE with heat sinks added SSR wiring diagram using Fysetc Spider V2.2 added URL to the Klipper Configuration from VoronDesign/Voron2 GitHub Repo for Fysetc Spider V2.2 Updated Color Pin diagram for Fysetc Spider V2.2 added original Fysetc Spider V2.2 pinout *added URL to the original Fysetc Spider V2.2 Github Repo