Current Behaviour: Pressing the reset button on the BTT Mini12864 screen does not do anything
Expected Behaviour: Pressing the reset button on the BTT Mini12864 should force an emergency shutdown of klipper
Current printer configuration is here, LCD config is near the bottom: https://github.com/staticanime/klipper-configs-voron-switchwire/blob/main/printer.cfg
It's a straight copy of the sample config from the repo, with the LED colors changed to my liking. Not sure if I'm doing something terribly wrong, but I've tried both with and without the JP1 jumper connected, I get no response from the reset button on the screen in either case. This was working previous when connected to a BTT Octopus in my Voron 2.4
Current Behaviour: Pressing the reset button on the BTT Mini12864 screen does not do anything Expected Behaviour: Pressing the reset button on the BTT Mini12864 should force an emergency shutdown of klipper
Current printer configuration is here, LCD config is near the bottom: https://github.com/staticanime/klipper-configs-voron-switchwire/blob/main/printer.cfg It's a straight copy of the sample config from the repo, with the LED colors changed to my liking. Not sure if I'm doing something terribly wrong, but I've tried both with and without the JP1 jumper connected, I get no response from the reset button on the screen in either case. This was working previous when connected to a BTT Octopus in my Voron 2.4