search

VoronDesign / Voron-Switchwire

VORON Switchwire
GNU General Public License v3.0
480 stars 134 forks source link

Fixed stepper_y positions and added BED_MESH_CALIBRATE in print_start #35

Open hymness1 opened 2 years ago

hymness1 commented 2 years ago

Actual config file put X0 Y0 outside the bed. I talk about this here : https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/Klipper_Macros#about-the-modded-keybak-mount-and-the-endstop-microswitch-located-at-z_min-or-sensorless-homing-at-z_min-and-y-travel

This fix should put Y0 on the bed, just over the 2 little holes often founds on flex sheets. The positions works for a BOM VSW with an LDO MK52 heated bed.

I also added a BED_MESH_CALIBRATE after initial homing in print_start. We can't really do without one over at VSW.

hymness1 commented 2 years ago

Changed stepper_z homing_speed to 20 and added speed parameter set to 10 in probe section. It helps with a lot of inconsistencies people tend to have in relation of the z_offset