search

VoronDesign / Voron-Switchwire

VORON Switchwire
GNU General Public License v3.0
467 stars 134 forks source link

Manual only shows Probe Signal Wire Connection, Website is also unclear #43

Open ChaosBlades opened 2 years ago

ChaosBlades commented 2 years ago

The Switchwire manual shows the diode and signal wire connection but just shows the positive and negative probe wires going to nothing. Screenshot from 2022-03-08 16-31-28

The website could be more clear as well. https://docs.vorondesign.com/build/electrical/sw_miniE3_v20_wiring.html Says... Plug Probe GND and Signal (with BAT85 diode) in to Z-STOP Connect Probe +V to VIN in terminal next to HB

Sound Say... Plug Probe Ground (Blue Wire) to Z-STOP GND and Signal (Black Wire) with BAT85 diode (black band facing away from connector) in to Z-STOP PC2 Connect Probe Positive (Brown Wire) to POWER 12/24V (The one just to the Left of BED)

ChaosBlades commented 2 years ago

Also, The Mainboard Breakout Board pictured on page 125, I can't find anything on this board. It isn't linked to, I cant find any reference to it anywhere, and I certainly can't find anywhere to buy it. All the Toolhead PCB listings for purchase only come with the Toolhead PCB. It also shows the Probe being connected from a 3-pin connector to a 2-pin connector via 1 Brown Wire. So it is not clear how this is supposed to be connected even if I could find anything on this mysterious board. Screenshot from 2022-03-08 17-19-13

Onlywavesmdp commented 2 years ago

I have the same problem, were you able to solve it?