Open Furcube opened 1 year ago
It's mentioned in the r8 errata; https://github.com/VoronDesign/Voron-Tap/blob/main/Manual/R8_errata.md I didn't find this until I started building it as well so perhaps it's time to update the regular manual.
Yup, as @Martorias said. It's in the errata. There's no mention of the errata in the main readme though, just a link to the manual so I found it quite confusing. I ended up melting the heatset inserts farther into the plastic yesterday when the bolts didn't reach and I hadn't read the errata.
I also missed the other steps in the update but those weren't irreversible so I could take it appart and fix.
The manual should probably be updated or there should be clearer links to the errata at least
Manual specifies M3 6mm. 8mm and 12mm With part which have old version of [a]_Tap_Center_r8.stl. 8mm and 12mm bolts are too short for current version.
In step file bolt lengths are 6mm, 12mm and 16mm.