search

VoronDesign / Voron-Trident

Voron Trident CoreXY 3D Printer design
582 stars 172 forks source link

Deck Support Clip STL Labeled wrong #65

Closed AleXthePunK closed 2 years ago

AleXthePunK commented 2 years ago

For the Trident STLs, the deck_support_3mm_x8 and deck_support_4mm_x8 are backwards.

blite commented 2 years ago

Are these shown inserted backwards in the manual as well? I could not get them to work with the mandala rose works panels as shown in the manual. I am going to try the model for deck_support_4mm_x8 installed backwards.

Cad vs manual image

image

AleXthePunK commented 2 years ago

The manual is right, the labels on the STLs are backwards.

stvptrsn commented 2 years ago

@blite The actual parts were a last second change so didn't get reflected in the manual. They work the same though, just having one leg longer makes it easier to twist them in to place and made some room for the zip tie anchor point.

Is the reported issue that the file names are switched? The 3mm labeled part should be taller for the 3mm thick deck panel. The 4mm part has extra room for a thicker panel. I've double checked the parts and they are named as I would expect them to be.

stvptrsn commented 2 years ago

Cleared this up in Discord chat. The parts are labeled correctly. All panel related stuff are named for the total panel thickness they go with (panel plus foam when applicable)