2020 aplic cam mount

2020_aplic_cam_mount

2020 Aplic Cam Mount is a 3D printed part that is used to mount a cheapo aplic hd camera to the 2020 frame at bed level. The mount is designed to be held in place with a M3 screw and a M3 nut. Additionaly, you need 4 M3 heat inserts, 4 M3 spacers and 4 M3x6 screws for mounting the camera on the mount (pun intended).

Files

aplic_cam_mount_voron_2_4_300x300.stl - The mount STL, angled for the Voron 2.4 300x300mm geometry.
aplic_cam_mount.scad - The OpenSCAD file for the mount (you can play modify the parameters for your own printer's geometry).

Parts

The mount is designed to be used with the following parts:

- 1x 3d printed 2020 Aplic Cam Mount
- 1x Aplic Webcam - 1920x1080P 
- 1x M3x10 screw
- 2x M3 nut
- 4x M3 heat insert
- 4x M3 spacer
- 4x M3x6 screws

Printing

The mount is printed in the orientation that it is in the STL file. The mount is printed should be printed with the recommended Voron settings (40% infill and 4 perimeters) in ABS/ASA. That said, I've printed mine PETG and it still holds. No supports or mount needed

Credits and license

Which mods are added by this PR?

2020 Aplic Cam Mount

How was it tested?

Printed, installed in Voron 2.4 (sn V2.6611) and used for the last 2 months.

Any background context you want to provide?

Camera mount for the bed level of (of 2.4). Parametric design, can be modified by users (OpenSCAD source included)

Screenshots (if appropriate)

See image in the PR

⚠️⚠️PLEASE READ AND COMPLETE THE CHECKLIST BELOW⚠️⚠️

[x ] I have read the rules available here and my mod adheres to these rules.
[ x] This mod was created by myself and I agree to publish it under the repository license

VoronDesign / VoronUsers