[x] The mod, firmware configuration or slicer profile is in the correct category
folder. Printable mods go to printer_mods/, firmware configurations
go to firmware_configurations/, slicer profiles go to slicer_profiles/.
Create a subfolder with your name, and place the mods in a subfolder with
a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
[x] Folder and file naming:
Folders and filenames shouldn't contain spaces. Only letters a-zA-Z, numbers 0-9, underscores _, hyphens - and periods .
Primary color: part_xyz.stl
Accent color: [a]_part_xyz.stl
Opaque color (Blocks light): [o]_part_xyz.stl
Clear/transparent color (Allows light): [c]_part_xyz.stl
Quantity, if more than one is needed: part_xyz_x4.stl
[x] For each mod, add a small README.md file to its folder with a short description
of what the mod accomplishes. This readme can be used to add pictures, give assembly
instructions or specify a bill of materials if the mod requires additional hardware.
[x] The PR modifies the top-level README.md of the category folder adding the
contribution to the table. Read the top part of the file for instructions on how
to do this. Please preserve the alphabetical ordering while adding new rows. Make sure
to fill out the compatibility matrix to indicate which versions of the Voron printer
the submission is compatible with.
[x] The mod/configuration/profile has been tested by the person submitting the mod
and/or other Voron users. Make sure to add information about how the mod was tested below.
[x] The mod is not merely a slight modification of an official Voron part, configuration
or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile
which only modifies a few values). (When in doubt, contact one of the admins in the
Voron discord before submitting the PR)
[x] Submitted STLs are printable without support. (If the mod does not meet this criterion
join the Voron discord and ask the other users for advice on how to modify the mod such
that it does not require supports)
[x] Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer
and checking if mesh errors are reported.)
[x] Submitted STL files are oriented and scaled properly for printing.
[x] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).
[ ] Submission includes a CAD file in the form of a .STEP or .SCAD file
Which mods/configurations/profiles are added by this PR?
V0_Launchpad_Skirt
How was it tested?
It was built into my printer and tested for problems.
printer_mods/, firmware configurations go tofirmware_configurations/, slicer profiles go toslicer_profiles/. Create a subfolder with your name, and place the mods in a subfolder with a descriptive name within that folder, e.g.:/printer_mods/FHeilmann/flux_capacitora-zA-Z, numbers0-9, underscores_, hyphens-and periods.part_xyz.stl[a]_part_xyz.stl[o]_part_xyz.stl[c]_part_xyz.stlpart_xyz_x4.stlREADME.mdfile to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware.README.mdof the category folder adding the contribution to the table. Read the top part of the file for instructions on how to do this. Please preserve the alphabetical ordering while adding new rows. Make sure to fill out the compatibility matrix to indicate which versions of the Voron printer the submission is compatible with..STEPor.SCADfileWhich mods/configurations/profiles are added by this PR?
V0_Launchpad_Skirt
How was it tested?
It was built into my printer and tested for problems.
Any background context you want to provide?
Screenshots (if appropriate)
Further notes