search

VzBoT3D / VzBoT-Vz330

The VzBot 3D-printer
1.04k stars 163 forks source link

Hextrudort high motor mount feed gear problems #38

Closed FloxRoxX closed 1 year ago

FloxRoxX commented 2 years ago

Hi, i printed the HextrudOrt with the high motor mount (not the helical version). Additionally i use the original Bondtech gears and noticed, that the gears do not make good contact with the filament.

Hextrudort was printed on ABS like resin for high temp resistances on my elegoo mars. So accuracy cannot be the problem ;)

See picture, you can clearly see that the filament is only touching the left screw barely. Also with tensioning the gears fully up the tension isnt enought... Any help is appreaciated :)

IMG_20220712_000430

EDIT: Here a little video that shows the problem in action...

https://photos.app.goo.gl/UMnWPYBEVg9GL4wj9

simonvez commented 1 year ago

there was a new model published that has an extra bolt at the bottom to help. But looking at your video it looks like the printed parts are not stiff enough maybe? Try with the new model it should help a lot