RF Cascade for ULXD

[mjhaahr]

• Look at ULXD to figure out if BNC is isolated
• Look if I/O Panel has two more Outs (if not, by new panel)

[benjamin-antupit]

• Look at ULXD to figure out if BNC is isolated

ULXD Receiver has BNC cascade out for antennas A and B.

• Look if I/O Panel has two more Outs (if not, by new panel)

I/O panel has more than 2 cutouts unpopulated.

[mjhaahr]

ULXD Receiver has BNC cascade out for antennas A and B.

That's not what I meant and you know it, I'm talking of the connectors are grounded or not

[Amanhire]

https://www.mouser.com/ProductDetail/Neutrik/NBB75DFIB?qs=%252BrH4t%252BeVZ2OaW3zrRqAaDQ%3D%3D

[mjhaahr]

Maybe use Neutrik DSS Labels (one red and one blue) for Antenna cascade and labeling

Use the green BNC shorts (or the even shorter ones in the TD tool bench)