search

WandererFan / FreeCAD-TechDraw

This repo is obsolete. Please use FreeCAD/FreeCAD.
Other
3 stars 1 forks source link

Detail, cross section, broken out section, hole table #28

Closed 3h600 closed 8 years ago

3h600 commented 8 years ago

Hi, here are some usefull features and would be great to see them in your module:

I know that you have worked on cross section, but I left it on list. Anyway hopefully you will like requested features. Will you able to provide those points?

ianrrees commented 8 years ago

Goal at this point is to get a solid base working, and we'll see where things go from there.

In the meantime, it would be great to get feedback from testing what we've done already.

WandererFan commented 8 years ago

The hole table should be relatively straight forward once we get SpreadsheetView implemented. #24 Detail view might be a Clip with a larger scale value? Not sure what a "broken out section" is. Link?

Thanks for the input.

WandererFan commented 8 years ago

found a "broken out section"

ianrrees commented 8 years ago

@efyx83 - could you please elaborate on what you mean by "detail"? If you don't mind, I'd like to split this issue into 4 separate issues.

3h600 commented 8 years ago

@ianrrees sure. Drawing detail is very often using and needed "feature". It is for zoom in some part of object. You are selecting region by circle (or different shape) after that you have zoomed additional view. Selected circle is marked by letter (next free) A, B, C etc.. and zoomed view is under described with: Detail A, B, C... and a scale of zoom. Hopefuly this is written quite clearly, in case if not ;) see attached link: http://blogs.solidworks.com/solidworksblog/wp-content/uploads/sites/2/2014/01/1-30-2014-12-53-57-PM.jpg Video: https://www.youtube.com/watch?v=92XDSTsFr-0 (around 0:45s)

"Broken out section", you can draw a spline into region and then define depth, then you are getting additional view with "broken". I'll add video of process in SW https://www.youtube.com/watch?v=2qj2J4QbWx8 (about 2:10min is a resault)

And hole table: https://www.youtube.com/watch?v=wGxgfFKf1HU

SW has really good (in my opinion the best) drawing module it is worth to observe some features.

ianrrees commented 8 years ago

I've created 4 separate issues to track the parts of this one.