WeActStudio / WeActStudio.MiniSTM32F4x1

MiniF4-STM32F401CEU6/STM32F411CEU6 Product Literature
685 stars 153 forks source link

5V measured on the 3.3V pins #25

Closed szszoke closed 3 years ago

szszoke commented 3 years ago

Hello!

I got two Blackpill V3 boards with the F411CE and when they are connected via the USB cable to my computer, I can measure 5V on both the 5V and the 3.3V pins.

I checked and they are not shorted. Is this normal?

szszoke commented 3 years ago

If I am reading the schematic correctly, the 3.3V pins should be connected to the output of the 3.3V regulator.

WeActStudio commented 3 years ago

I think the LDO failed, maybe your board is not made by us, it is one of the copy board, this board, if you short circuit 3v3 and GND, LDO will fail, it can not output 3.3V, instead of output 5V. The worst part is that it printed our version number and logo, and placed a Github link on AliExpress's product details page

szszoke commented 3 years ago

I have two boards, new, and they both exhibit this issue.

szszoke commented 3 years ago

Where is the LDO located on the board? I'm guessing it is U2 on the schematic but it is not marked on the board.

szszoke commented 3 years ago

I ended up doing more testing and I found that the boards have a 5V regulator instead of a 3.3V regulator.

Dreadrik commented 2 years ago

@szszoke

I ended up doing more testing and I found that the boards have a 5V regulator instead of a 3.3V regulator.

I just received two boards with the exact same issue. Bought them from a reputable seller as well. Did you manage to replace the regulator, or did you return the boards?

szszoke commented 2 years ago

I still have the old boards but I got replacements. The replacement boards had really straight edges on the PCB while the bad ones looked like they were marked with a saw and then broken off.

Dreadrik commented 2 years ago

Ok, thanks! Mine look straight, has the WeAct logo and the V3.0 version number and everything. I think I'll have to make a claim for replacements as well.

fivdi commented 2 years ago

The version number of the latest boards has been V3.1 for quite some time now.

See https://www.aliexpress.com/item/1005001456186625.html which says:

WeAct STM32F411CEU6 STM32F411 STM32F4 V3.1 Learning Board Micropython PYBoard Arduino BlackPill Development 512KB Flash 128KB

See also https://github.com/WeActTC/MiniSTM32F4x1/tree/master/HDK.