Closed chaitanya4b3 closed 7 years ago
dear chaitanya4b3, for which device you build packages?
It's our Custom build hardware, with QCA9558AT4A, processor, which I have build using AR71xxx in make menuconfig
are sure your packets size isn't too big? cause this wiki was old and packages size change in the update, lead you to fall to build packages, I recommend you check it in compiling and also can you show me your following files in your bin/ar71xxx directory: https://imagebin.ca/v/3dBN8x6jLFvm cause link didn't work anymore.
They have successfully compiled and have created the bin files: https://imagebin.ca/v/3dHJRKbO2l05 https://imagebin.ca/v/3dHKM9fd3Q93
did you choose Target Profile
?
I chose Target Profile, and in that I chose default profile for all drivers
i don't think openwrt-ar71xx-generic-uImage-gzip.bin suitable to your hardware check the supported list https://wiki.openwrt.org/toh/start and also ask question in this forum https://forum.openwrt.org/
I have followed all the instructions given in the website. It has created, the following files in my bin/ar71xxx directory: https://imagebin.ca/v/3dBN8x6jLFvm
Then I use this file openwrt-ar71xx-generic-uImage-gzip.bin, and boot the openwrt using auth mode at time of booting: auth> The tftp boot is successful and after resetting the board it gives the following error as in link: https://imagebin.ca/v/3dBNzPAe7JgZ
Help would be appreciated!!!!