search

WindRiver-Labs / wr-ostree

OSTree layer for Wind River Linux
1 stars 1 forks source link

Booting an image with ostree and encrypted-storage does not work #1

Open mferland opened 4 years ago

mferland commented 4 years ago

Compiled an image with: WRTEMPLATE ?= "feature/ntp feature/edac feature/ostree feature/docker feature/kubernetes feature/efi-secure-boot feature/tpm2 feature/encrypted-storage"

Cleared the TPM from the BIOS and booted from a hard disk. The system hangs at:

error: no suitable video mode found.
Booting in blind mode
Linux version 5.2.32-yocto-standard (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Mar 18 19:45:31 UTC 2020
Command line: BOOT_IMAGE=/0/boot/vmlinuz rw rootwait ostree_boot=LABEL=otaboot 
ostree_root=LABEL=otaroot flux=fluxdata ostree=/boot/0/ostree console=ttyS0,115200 console=tty0
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000079980fff] usable
BIOS-e820: [mem 0x0000000079981000-0x0000000079af2fff] reserved
BIOS-e820: [mem 0x0000000079af3000-0x0000000079eaffff] usable
BIOS-e820: [mem 0x0000000079eb0000-0x0000000079f6dfff] ACPI NVS
BIOS-e820: [mem 0x0000000079f6e000-0x000000007bd52fff] reserved
BIOS-e820: [mem 0x000000007bd53000-0x000000007bda7fff] type 20
BIOS-e820: [mem 0x000000007bda8000-0x000000007bda8fff] usable
BIOS-e820: [mem 0x000000007bda9000-0x000000007be2efff] reserved
BIOS-e820: [mem 0x000000007be2f000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0x7bd50198  ACPI=0x79ef8000  ACPI 2.0=0x79ef8000  SMBIOS=0x7bc05000  SMBIOS 3.0=0x7bc04000 
SMBIOS 3.0.0 present.
DMI: Congatec AG conga-B7XD/conga-B7XD, BIOS TSDER115 09/21/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.608 MHz processor
last_pfn = 0x180000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007bd50198 to 0x000000007bd501d0.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
Secure boot could not be determined
RAMDISK: [mem 0x34a0f000-0x364fefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000079EF8000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079EF8098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000079F15408 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000079EF81E8 01D21B (v02 ALASKA A M I    01072009 INTL 20091013)
ACPI: FACS 0x0000000079F54F80 000040
ACPI: APIC 0x0000000079F15518 0000DC (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x0000000079F155F8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000079F15640 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x0000000079F156E0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079F15720 000042 (v01                 00000000      00000000)
ACPI: HPET 0x0000000079F15768 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MSCT 0x0000000079F157A0 000090 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SLIT 0x0000000079F15830 00002D (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x0000000079F15860 001158 (v03 ALASKA A M I    00000001 INTL 20091013)
ACPI: WDDT 0x0000000079F169B8 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SSDT 0x0000000079F169F8 00EBA3 (v01 AMI    PmMgt    00000001 INTL 20120913)
ACPI: SPCR 0x0000000079F255A0 000050 (v02 A M I  APTIO V  01072009 AMI. 0005000B)
ACPI: TPM2 0x0000000079F255F0 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
ACPI: SSDT 0x0000000079F25628 0020CB (v02 ALASKA SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x0000000079F276F8 000064 (v02 ALASKA SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x0000000079F27760 000102 (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: DMAR 0x0000000079F27868 0000C4 (v01 ALASKA A M I    00000001 INTL 20091013)
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x17fffffff]
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x17fffffff] -> [mem 0x00000000-0x17fffffff]
NODE_DATA(0) allocated [mem 0x17fff9000-0x17fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000005efff]
  node   0: [mem 0x0000000000060000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000079980fff]
  node   0: [mem 0x0000000079af3000-0x0000000079eaffff]
  node   0: [mem 0x000000007bda8000-0x000000007bda8fff]
  node   0: [mem 0x000000007be2f000-0x000000007bffffff]
  node   0: [mem 0x0000000100000000-0x000000017fffffff]
Zeroed struct page in unavailable ranges: 24914 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: console: uart,io,0x3f8,115200
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x79981000-0x79af2fff]
PM: Registered nosave memory: [mem 0x79eb0000-0x79f6dfff]
PM: Registered nosave memory: [mem 0x79f6e000-0x7bd52fff]
PM: Registered nosave memory: [mem 0x7bd53000-0x7bda7fff]
PM: Registered nosave memory: [mem 0x7bda9000-0x7be2efff]
PM: Registered nosave memory: [mem 0x7c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 51 pages/cpu s171160 r8192 d29544 u262144
Built 1 zonelists, mobility grouping on.  Total pages: 1007642
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/0/boot/vmlinuz rw rootwait ostree_boot=LABEL=otaboot ostree_root=LABEL=otaroot flux=fluxdata ostree=/boot/0/ostree console=ttyS0,115200 console=tty0
Memory: 3813488K/4094648K available (14340K kernel code, 1335K rwdata, 4088K rodata, 1628K init, 988K bss, 281160K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43426 entries in 170 pages
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
        Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 16640, nr_irqs: 896, preallocated irqs: 16
random: get_random_bytes called from start_kernel+0x30d/0x4d9 with crng_init=0
Console: colour dummy device 80x25
printk: console [tty0] enabled
printk: console [ttyS0] enabled
ACPI: Core revision 20190509
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007bc48000 end: 0x0000007bc57fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 9 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15929e5321f, max_idle_ns: 440795258645 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.21 BogoMIPS (lpj=1496608)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Vulnerable: Clear CPU buffers attempted, no microcode
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 44K
smpboot: CPU0: Intel(R) Pentium(R) CPU D1519 @ 1.50GHz (family: 0x6, model: 0x56, stepping: 0x3)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (23945.72 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x79eb0000-0x79f6dfff] (778240 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
xor: automatically using best checksumming function   avx       
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
raid6: avx2x4   gen() 14335 MB/s
raid6: avx2x4   xor()  9460 MB/s
raid6: avx2x2   gen() 12187 MB/s
raid6: avx2x2   xor()  7371 MB/s
raid6: avx2x1   gen() 10511 MB/s
raid6: avx2x1   xor()  6972 MB/s
raid6: sse2x4   gen()  7562 MB/s
raid6: sse2x4   xor()  4882 MB/s
raid6: sse2x2   gen()  6292 MB/s
raid6: sse2x2   xor()  4039 MB/s
raid6: sse2x1   gen()  5390 MB/s
raid6: sse2x1   xor()  3650 MB/s
raid6: using algorithm avx2x4 gen() 14335 MB/s
raid6: .... xor() 9460 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [LTR]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf17000-0xfbf17fff]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf00000-0xfbf0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf16000-0xfbf1600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfbf15000-0xfbf1500f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf13000-0xfbf133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf12000-0xfbf127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf11000-0xfbf110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbf10000-0xfbf10fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000
pci 0000:03:00.0: reg 0x10: [mem 0xfbe06000-0xfbe07fff 64bit]
pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000
pci 0000:03:00.1: reg 0x10: [mem 0xfbe04000-0xfbe05fff 64bit]
pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000
pci 0000:03:00.2: reg 0x10: [mem 0xfbe02000-0xfbe03fff 64bit]
pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000
pci 0000:03:00.3: reg 0x10: [mem 0xfbe00000-0xfbe01fff 64bit]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb400000-0xfb5fffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfb604000-0xfb607fff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xfb880000-0xfb8fffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfbc00000-0xfbcfffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0xfbb00000-0xfbb03fff 64bit]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0xfbb00000-0xfbbfffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb200000-0xfb3fffff 64bit pref]
pci 0000:04:00.1: reg 0x20: [mem 0xfb600000-0xfb603fff 64bit pref]
pci 0000:04:00.1: reg 0x30: [mem 0xfb800000-0xfb87ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0xfba00000-0xfba03fff 64bit]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0xfba00000-0xfbafffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0xfb900000-0xfb903fff 64bit]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0xfb900000-0xfb9fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:02.2: PCI bridge to [bus 04-05]
pci 0000:00:02.2:   bridge window [mem 0xfb800000-0xfbcfffff]
pci 0000:00:02.2:   bridge window [mem 0xfb200000-0xfb6fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [8086:1533] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfbd00000-0xfbd7ffff]
pci 0000:08:00.0: reg 0x18: [io  0xe000-0xe01f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfbd80000-0xfbd83fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.7:   bridge window [mem 0xfbd00000-0xfbdfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.2: PCI bridge to [bus 04-05]
pci 0000:00:02.2:   bridge window [mem 0xfb800000-0xfbcfffff]
pci 0000:00:02.2:   bridge window [mem 0xfb200000-0xfb6fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.7:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 1 [mem 0xfb800000-0xfbcfffff]
pci_bus 0000:04: resource 2 [mem 0xfb200000-0xfb6fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:07: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x641 took 16220 usecs
pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27584K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x6fcc1000-0x73cc1000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:01.0: AER: enabled with IRQ 25
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.1: AER: enabled with IRQ 26
pcieport 0000:00:02.0: PME: Signaling with IRQ 28
pcieport 0000:00:02.0: AER: enabled with IRQ 28
pcieport 0000:00:02.2: PME: Signaling with IRQ 29
pcieport 0000:00:02.2: AER: enabled with IRQ 29
pcieport 0000:00:03.0: PME: Signaling with IRQ 31
pcieport 0000:00:03.0: AER: enabled with IRQ 31
pcieport 0000:00:1c.0: PME: Signaling with IRQ 32
pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pcieport 0000:00:1c.7: PME: Signaling with IRQ 33
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ioatdma: Intel(R) QuickData Technology Driver 5.00
ioatdma 0000:03:00.0: enabling device (0100 -> 0102)
ioatdma 0000:03:00.1: enabling device (0100 -> 0102)
ioatdma 0000:03:00.2: enabling device (0100 -> 0102)
ioatdma 0000:03:00.3: enabling device (0100 -> 0102)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
brd: module loaded
loop: module loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
mpt3sas version 28.100.00.00 loaded
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf12000 port 0xfbf12100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:08:00.0: added PHC on eth0
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:13:95:35:0f:06
igb 0000:08:00.0: eth0: PBA No: 000300-000
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
pmd_set_huge: Cannot satisfy [mem 0xfb400000-0xfb600000] with a huge-page mapping due to MTRR override.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD5003AZEX-00K1GA0, 80.00A80, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5003AZEX-0 0A80 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1496.534 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15925873df6, max_idle_ns: 440795253867 ns
clocksource: Switched to clocksource tsc
ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 000600-000
ixgbe 0000:04:00.0: 00:13:95:35:0f:05
ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection
libphy: ixgbe-mdio: probed
ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 000600-000
ixgbe 0000:04:00.1: 00:13:95:35:0f:04
ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection
libphy: ixgbe-mdio: probed
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf13000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
i8042: PNP: No PS/2 controller found.
input: PC Speaker as /devices/platform/pcspkr/input/input4
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using NMI interrupt.
u32 classifier
    Actions configured
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
mce: Using 22 MCE banks
microcode: sig=0x50663, pf=0x10, revision=0x7000013
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: L3 monitoring detected
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (6838801734, 947361610)->(8033881197, -247717853)
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
printk: console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:00: setting system clock to 2020-03-19T18:34:28 UTC (1584642868)
ALSA device list:
  No soundcards found.
Freeing unused kernel image memory: 1628K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 8K
Run /init as init process
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
random: fast init done
random: mktemp: uninitialized urandom read (6 bytes read)
random: cryptsetup: uninitialized urandom read (2 bytes read)
random: crng init done
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 243+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to <conga-b7xd>.
systemd[1]: /usr/lib/systemd/system/gpsd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/gpsd.sock → /run/gpsd.sock; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock → /run/rpcbind.sock; please update the unit file accordingly.
systemd[1]: boot.mount: Unit is bound to inactive unit dev-sda2.device. Stopping, too.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice User and Session Slice.
EXT4-fs (sda3): re-mounted. Opts: (null)
fuse: init (API version 7.31)
openvswitch: Open vSwitch switching datapath
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20190509/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20190509/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EFI Variables Facility v0.08 2004-May-17
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
gpio_ich gpio_ich.1.auto: GPIO from 436 to 511
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
iTCO_vendor_support: vendor-support=0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
intel_rapl: Found RAPL domain package
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl: Found RAPL domain dram
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
Press Enter for maintenance
(or press Control-D to continue):

Output of journalctl -p err from the rescue shell:

-- Logs begin at Thu 2020-03-19 18:34:32 UTC, end at Thu 2020-03-19 18:38:03 UTC. --
Mar 19 18:36:02 conga-b7xd systemd[1]: Timed out waiting for device /dev/disk/by-label/fluxdata.
Mar 19 18:38:03 conga-b7xd systemd-networkd-wait-online[465]: Event loop failed: Connection timed out
Mar 19 18:38:03 conga-b7xd systemd[1]: Failed to start Wait for Network to be Configured.

mount returns:

sh-5.0# mount
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /dev type devtmpfs (rw,relatime,size=1954588k,nr_inodes=488647,mode=755)
/dev/sda3 on /sysroot type ext4 (rw,noatime)
/dev/sda2 on /sysroot/boot type ext4 (rw,relatime)
/dev/sda3 on / type ext4 (rw,noatime)
/dev/sda2 on /boot type ext4 (rw,relatime)
/dev/sda3 on /usr type ext4 (ro,noatime)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/debug type cgroup (rw,nosuid,nodev,noexec,relatime,debug)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
/dev/sda1 on /boot/efi type vfat (ro,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

Commenting out the LABEL=fluxdata entry from /etc/fstab partly solves the issue, meaning I can at least get to a shell.

Any help appreciated!

mferland commented 4 years ago

Forgot to mention, I am running Wind River Linux Base 19.45 Update 5 and used the wic image (and bmaptool) to flash the image to the disk.