meitalk commented 6 years ago

Hi, After installing the latest MOCK SAS , I receive the following response when I sends the registration requests https://XXXX:5000/v2.0/registration: Response data: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">404 Not Found

Not Found

The requested URL was not found on the server. If you entered the URL manually please check your spelling and try again.

The Mock SAS server URL is set correctly in the CBRS_MOCK_SAS_V_2_0\cbrsPython-master\Configuration\conf. Actually, I copied the conf file from previous Mock SAS version , which worked fine, to the new Mock SAS version were I received the failure above. I would appreciate fast response.

cwilliams-ericsson commented 6 years ago

A couple of possibilities:

url should include "v1.1", not "v2.0"
possibly an issue with certificates between CBSD and Test Harness?
Firewall or other issue on server?

meitalk commented 6 years ago

When using v1.1 version, connection to the Mock SAS fails .
The certificates were taken from the github.
firewall is off. The same server is able to connect and work properly with previous Mock SAS version.

cwilliams-ericsson commented 6 years ago

I assume this has been resolved and can be closed?

Wireless-Innovation-Forum / Citizens-Broadband-Radio-Service-Device

registration request fails - URL not found #56

Not Found